二氧化碳与磷化氢混合熏蒸防治储烟害虫试验

目前,储烟害虫防治普遍采用磷化铝片剂常规熏蒸法,磷化铝施用量为6～9g/m3,安全上存在一定的隐患。为了减少磷化铝用药量,于2003年应用微电脑控制的仓外混合熏蒸机,施用钢瓶装液化二氧化碳和56%磷化铝片剂,进行了二氧化碳与磷化氢混合熏蒸杀虫试验,以8g/m3磷化铝常规熏蒸法为对照。试验结果表明,磷化铝施用量为2.3g/m3、二氧化碳施用量为12g/m3,混合熏蒸结果达到100%杀死害虫。与对照相比,杀虫效果相同,混合熏蒸法具有磷化铝施用量较小、较为安全和有利于减少污染等优点。     

Oxidative radical generation via nitrogen dioxide dimer conversions induced by amide groups of macromolecules

The features of initiation of free radical reactions in polymers by dimers of nitrogen dioxide are considered. The conversion of planar dimers into nitrosyl nitrate in the presence of amide groups of macromolecules has been revealed. Nitrosyl nitrate initiates radical reactions in oxidative primary process of electron transfer with formation of intermediate radical cations and nitric oxide. As a result of subsequent reactions, nitrogen‐containing radicals are produced. The dimer conversion has been exhibited by estimation of the oxyaminoxyl radical yield in characteristic reaction of p‐benzoquinone with nitrogen dioxide on addition of aromatic polyamide and polyvinylpyrrolidone to reacting system. The isomerization of planar dimers is efficient in their complexes with amide groups, as confirmed by ab initio calculations. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Anodic oxidation of mecoprop herbicide at lead dioxide

The electrochemical oxidation of an aqueous solution containing mecoprop (2-(2-methyl-4-chlorophenoxy)propionic acid) has been studied at PbO₂ anodes by cyclic voltammetry and bulk electrolysis. The influence of current density, hydrodynamic conditions, temperature and pH on the degradation rate and current efficiency is reported. The results obtained show that the use of PbO₂ leads to total mineralization of mecoprop due to the production of oxidant hydroxyl radical electrogenerated from water discharge. The current efficiency for the electro-oxidation of mecoprop is enhanced by low current density, high recycle flow-rates and high temperature. In contrast, the pH effect was not significant. It has also been observed that mecoprop decay kinetics follows a pseudo-first-order reaction and the rate constant increases with rising current density.     

High-performance carbon counter electrode for dye-sensitized solar cells

Here, we reported that a new carbon electrode prepared with an activated carbon was superior to a Pt sputtered electrode as the counter electrode of dye-sensitized solar cells. The photovoltaic performance was largely influenced by the roughness factor of carbon electrode. The open-circuit voltage increased by about 60 mV using the carbon counter electrode compared to the Pt counter electrode because of positive shift of the formal potential for I₃⁻/I⁻ couple.     

纳米掺钼二氧化钛光催化剂研究发展

介绍了纳米掺钼二氧化钛光催化剂的制备、特性及应用     

超临界CO2处理后的金属铀表面氧化腐蚀和电化学腐蚀实验研究

采用重量法和电化学方法分别得到表面经超临界CO2处理后的铀试样在60℃、70％RH条件下的氧化动力学曲线(△m-t)和在50μg/g Cl^-溶液中的阳极极化曲线、自腐蚀电流等抗蚀评价指标。结果表明：经超临界CO2处理后，金属铀表面抗氧化腐蚀性能和抗化学介质腐蚀性能均有一定程度提高。对钝化膜提高金属铀表面抗腐蚀性能的原因进行了探讨。     

Occurrence and Preclusion of Terpene Chlorohydrins in Citrus Essential Oils

ABSTRACT: Screening commercial cold-pressed oils revealed the presence of terpene chlorohydrins, which may have quality and safety implications for end-users. Concentrations of (1R, 2R, 4R)-2-chloro-8- p -menthen-1-ol in some citrus essential oils ranged from less than 1 to 140 ppm. More than half of the oils tested contained less than 2 ppm of (1R, 2R, 4R)-2-chloro-8- p -menthen-1-ol. A pilot plant study used different concentrations of chlorinated water during the oil-recovery process. Cold-pressed oil, produced from a 30-ppm chlorine solution, contained (1R, 2R, 4R)-2-chloro-8- p -menthen-1-ol at detection threshold. The presence of (1R, 2R, 4R)-2-chloro-8- p -menthen-1-ol in citrus essential oils results from processing conditions and can be reduced through the reduction of chlorine levels in treatment water.     

Morphological changes in poly(?-caprolactone) in dense carbon dioxide

Morphological changes that take place in poly(?-caprolactone) upon exposure to carbon dioxide at high pressures have been explored as a function of pressure and temperature. SEM and DSC results point to a competition between CO₂-modulated crystallization and pressure-induced phase separation which leads to unique morphologies. At 293 K, exposure to CO₂ at pressures up to 45 MPa leads to recrystallization resulting in higher level of crystallinity and higher melting temperatures. Highest crystallinity levels along with distinct crystal morphology were observed after exposure to CO₂ at 308 K and 21 MPa. At a higher pressure at this temperature (308 K/34 MPa) polymer undergoes melting, and foaming is achieved during depressurization prior to solidification. At 323 K, the polymer is found to display unique crystal morphology with concave crystal geometry as well as porous domains. The results are discussed in terms of the crystallization and phase separation paths that are followed during exposure to CO₂ and the depressurization stages.     

纳米CeO2基电解质薄膜电性能实验研究

研究了不同热处理温度和不同测试温度下,纳米CeO2基薄膜的电性能.结果表明,纳米CeO2基薄膜在热处理温度为600℃和900℃时,其伏安特性曲线近似为线性特征;在热处理温度为700℃和800℃时,其伏安特性曲线中存在VCNR现象.结合纳米CeO2基薄膜的XRD图,对纳米CeO2基薄膜的电性能进行了理论分析和讨论.     

La3+掺杂对纳米TiO2微观结构及光催化性能的影响

以钛酸丁酯和氯化镧为原料,采用溶胶-凝胶法制备了La3+掺杂TiO2纳米粉体,讨论了不同掺杂浓度、不同热处理温度的样品催化降解刚果红染料实验中的光催化活性,并通过X射线衍射(XRD)、透射电镜(TEM)分析了La3+掺杂TiO2样品的相组成、晶胞参数和晶粒大小对光催化活性的影响.结果表明:La3+掺杂能够显著提高TiO2粒子的光催化活性,最佳掺杂浓度为100∶3 0,最佳热处理温度为600℃;La3+掺杂的TiO2的相组成是影响光催化活性的决定性因素;晶格膨胀程度及晶粒大小对光催化活性的影响,主要是在相组成相同或相近时才体现得比较明显.