简支深梁用和函数法的级数解答

引用和函数法求解弹性力学平面问题, 对简支深梁受三角形荷载作用时的应力进行了分析,同时给出了该问题的付立叶级数解答,该方法不仅将求解弹性力学的偏微分方程组解耦成非耦联的几个偏微分方程,而且其结果与传统的Airy应力函数得到的解答完全一致, 证明了该方法的正确性和适用性,该方法拓展了将经典的弹性力学解析法用于解决工程实际问题的空间。     

MICROSTRUCTURES AND TEXTURES IN COLD-ROLLED ALUMINIUM STRIP

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＡＮＤＴＥＸＴＵＲＥＳＩＮＣＯＬＤＲＯＬＬＥＤＡＬＵＭＩＮＩＵＭＳＴＲＩＰ①ＮｉｅＺｕｏｒｅｎ，ＺｈａｎｇＸｉｎｍｉｎｇ，ＹｉｎＺｈｉｍｉｎＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｒｉ...     

C型钢成型机的自动控制系统

本文介绍了液压数控冲剪式C型钢成型机的PLC控制系统的设计、实现及应用，该系统工作可靠，使用方便，极大地提高了C型钢成型机的自动化程度及生产效率。     

镀锌钢管双引出工艺设备的探讨

分析了我国镀锌钢管双引出工艺设备的现状。介绍了星轮齿盘式与螺旋式双引出工艺设备的特点，指出双排螺旋机组的综合指标较高，并对齿盘式双引出机组的磁力辊道及镀后处理设备提出了改进设想。     

Supported Molybdenum Carbides Lie Between Metallic and Sulfided Catalysts for Deep HDS

Hydrodesulfurization (HDS) of 4,6-dimethyldibenzothiophene on alumina-supported Mo₂C has been studied. These catalysts are stable and active under deep HDS conditions (0-250 wt ppm S). However, although they are well known to have hydrogenation properties, they lead preferentially to a non-hydrogenated product of the HDS reaction: dimethylbiphenyl. For the same reaction, supported platinum and sulfided molybdenum oxide lead to the hydrogenated products dimethyldicyclohexyl and methylcyclohexyltoluene, respectively. The ranking of HDS activity is as follows: MoS₂/Al₂O₃ < Mo₂C/Al₂O₃ < Pt/SiO₂.     

Study on Tribological Properties of Polytetrafluoroethylene Drawn Uniaxially at Different Temperature

Summary: Wear behavior correlations with morphology have been established from polytetrafluoroethylene (PTFE) drawn at 200, 327, and 375 °C with draw ratio about 4. The friction coefficient and wear rate for PTFE drawn at 327 °C are lower and the wear rate is lower than that of undrawn PTFE by about 30%. The structures of samples were characterized by scanning electron microscope (SEM), DSC, and wide angle X‐ray diffraction (WAXD). Results indicate that the debris morphologies of samples are different. The differences in the tribological behavior of undrawn and drawn samples were attributed to the improvement of the degree of the crystalline, fibrillation, and orderliness by drawing, especially, for PTFE drawn at 327 °C. The orderliness of molecular arrangement along the drawn direction is also higher for PTFE drawn at 327 °C than those of PTFE drawn at 200 and 375 °C, respectively. Therefore, the intensity of covalent bond along drawn direction is higher. The shear resistance and the deformability of the material are greatly improved and the size of the wear breakage unit decreases, which results in a good tribological property for PTFE drawn at 327 °C.

SEM morphology of fractured surface perpendicular to the draw direction for PTFE drawn at 327 °C.     

正交试验法在PAN原丝纺丝工艺中的应用

利用正交设计方法确定了PAN湿法纺丝过程中影响原丝性能最主要的因素。结果表明 :以计量泵转速、凝固浴温度、负拉伸以及蒸汽拉伸倍数作为考察对象 ,影响原丝性能的最显著因素是蒸汽拉伸倍数 ,其次是负拉伸。以负拉伸、第二拉伸、第三拉伸以及蒸汽拉伸的倍数作为考察对象 ,影响原丝性能最显著的是蒸汽拉伸倍数 ,负拉伸几乎没有影响。利用正交实验结果 ,适当调节蒸汽拉伸倍数 ,制得强度为 6.5～ 7.0cN/dtex ,线密度为 1.1～ 1.3dtex的原丝     

Volatile compounds in oils after deep frying or stir frying and subsequent storage

Soybean oil (900 g) was heated by deep frying at 200°C for 1 h with the addition of 0, 50, 100, 150 and 200 mL water, and then stored at 55°C for 26 weeks. Soybean oil, corn oil and lard were heated by stir frying and then stored at 55°C for 30 weeks. The volatiles and peroxide values of these samples were monitored. All samples contained aldehydes as major volatiles. During heating and storage, total volatiles increased 260-1100-fold. However, aldehyde content decreased from 62–87% to 47–67%, while volatile acid content increased from 1–6% to 12–33%; especially hexanoic acid which increased to 26–350 ppm in the oils after the storage period was completed. Water addition to the oils heated by deep frying tended to retard the formation of volatile compounds. The total amount of volatile constituents of lard heated by stir frying increased more during storage than that of corn oil or soybean oil. Peroxide values did not reflect the changes of volatile content in the samples.     

基于数据转换服务实现卷烟吸阻达标率的计算

针对吸阻达标率计算过程复杂,操作步骤繁多的问题,提出运用SQL Server工具DTS(Data Transformation Service数据转换服务)计算卷烟吸阻达标率,其实现过程包括数据库连接、数据表建立、视图创建、DTS包设计、代码编写、JOB作业建立和Excel透视表建立等步骤。结果证明吸阻达标率计算程序的开发不仅为达标率的实际应用提供技术支撑,还有助于企业更好地控制产品质量,提高生产工艺水平。     

人身意外伤害保险中介代理互联网销售系统的设计与实现

介绍了中国人寿保险股份有限公司湖南省分公司人身意外伤害保险中介代理互联网销售系统的设计与实现。该系统实现了人身意外伤害保险中介代理实时出单,以及与公司短险业务处理系统、单证管理系统的实时对接,具有较强的可扩展性和实用性。