坯料外形对镁合金矩形盒拉深成形的影响

用商业有限元软件模拟了在同一套模具和成形条件下不同毛坯外形的镁合金矩形盒拉深成形过程．依据数值模拟结果，分析了不同坯料外形对镁合金矩形盒拉深成形的影响。结果表明：使用矩形圆角坯料比其他坯料的成形性能好。     

Microstructural Investigation of Protective and Non-Protective Oxides on 11% Chromium Steel

FIB, SEM and STEM/EDX were used to investigate X20 stainless-steel samples exposed to dry O₂, or O₂ containing 40% H₂O, with a flow velocity of 0.5 cm/s or 5 cm/s, for 168 hr or 336 hr at 600°C. Thin protective Cr-rich (Cr,Fe)₂O₃ was maintained on the samples exposed to dry O₂, even after 336 hr, and on the sample exposed to O₂/H₂O mixture with the low-flow velocity (0.5 cm/s) for 168 hr. The oxide scale formed in the latter environment contained less Cr, due to Cr loss through CrO₂(OH)₂ evaporation. Breakaway oxidation occurred on the samples exposed in high-gas-flow velocity for shorter time (168 hr) or in low-gas-flow velocity (0.5 cm/s) for longer time (336 hr). The breakaway scales featured a two-layered structure: an outward-growing oxide “island” consisting of almost pure hematite (α-Fe₂O₃), and an inward-growing oxide “crater” consisting of (Cr,Fe)₃O₄. The transition from a thin protective (Cr,Fe)₂O₃ scale to a non-protective thick scale on this martensitic/ferritic steel originated locally and was followed by rapid oxide growth, resulting in a thick scale that covered the whole sample surface.     

粘土砂旧砂再生效果与其含水量的关系

在影响粘土砂旧砂再生效果的诸多因素中,旧砂中水分含量是最重要的因素。本文就水分含量对再生效果的影响规律、再生效果最佳的水分含量等进行了研究和分析,得出了如下结论:并非含水量越低再生效果就越好,而是存在一个去泥率低谷区;再生效果最佳的适宜水分含量为1～2%。     

The low-temperature oxidation of calcium by water vapor

The oxidation kinetics of calcium in water vapor have been studied over the temperature range 25–300°C. There is a change in the form of the oxidation kinetics with temperature, from essentially linear at temperatures below 150°C to logarithmic at 300°C. This is coupled with a change in the manner of growth of the oxide layer as well as the chemical composition of the reaction product. In addition, the oxidation rate decreases with temperature, reaching a minimum at about 150°C. At temperatures below 150°C oxidation appears to be a result of the formation of cracks or fissures in the oxide film. Above 150°C no single oxidation mechanism can be deduced.     

基于二维水流-水质数学模型计算的飞来峡水库动态纳污能力研究

根据飞来峡库区水动力特征,选取库区水功能区纳污能力设计条件,采用二维水流-水质数学模型计算确定了库区纳污能力,为库区纳污总量控制和制定限排总量提供依据。     

遵化市水资源状况及其开发利用分析

通过分析遵化市水资源及开发利用现状,评价了水资源现状存在问题,结合社会经济发展方向,提出了合理建议。     

闸坝水力学特性的三维数值模拟

本文采用标准k-ε双方程紊流模型及基于水气两相流的VOF方法,运用FLOW3 D软件对闸坝进行数值模拟,得出不同水位下的闸坝泄流能力,以及不同部位的闸室及消力池水面线、流速、压力等重要水力学要素。结果表明数值计算在一定程度上可以达到模型试验的效果。     

市政工程给水管道施工质量控制

在各个城市市政工程给水管道的施工中,相关部门在质量监测和管理等方面的工作中仍然存在不足之处。因此,如何解决市政工程给水管道施工中出现的各种故障,是相关施工人员值得思考的问题。     

Food-water security and virtual water trade in the Middle East and North Africa

The purpose of this study is to analyze the political economy of food-water security in the water-scarce Middle East and North Africa region. The study deploys the lens of virtual water trade to determine how the region's economies have met their rising food-water requirements over the past three decades. It is shown that the region's water and food security currently depend to a considerable extent on water from outside the region, ‘embedded’ in food imports and accessed through trade. The analysis includes blue (surface and groundwater) and green water resources.     

南水北调中线工程水价形成机制初探

回顾了南水北调中线工程水价形成过程,指出了现行水价方案存在的问题。对真实水价形成机制进行了论述,认为制定水价应遵循公平负担、成本回收、合理利润、价格调整和水资源配置原则;同一水质、同类用户、不同水源的用水,应执行统一的水价;不同行业实行不同水价。鼓励受水区各省市间开展水量配额交易,最大限度发挥工程效益。供水水价既要反映水资源的稀缺程度和水环境治理成本,促进资源的节约使用和环境保护,提高全民节水意识,又要保证供水管理单位能够正常持续经营,具备自我积累、自我发展的能力。