混合碳四的来料加工

分析了混合碳四中3种关键组分超标对丁二烯生产的不利影响，提出了外加工混合碳四过程中具体的应对措施和解决方案。     

Energy transfer mechanism of GdPO4: RE3+ (RE = Tb, Tm) under VUV-UV excitation

Polycrystal of GdPO₄:RE³⁺ (RE=Tb, Tm) phosphors were prepared by solid-state method. Vacuum ultraviolet excitation and emission spectrum and the energy transfer mechanism between the host and dopants of Tb³⁺ and Tm³⁺ were investigated respectively. The emission of Gd³⁺ at 313 nm was enhanced by the strong absorption of CTS of Tm³⁺ at 180 nm in GdPO₄: Tm. It has also been concluded that the excitation of Gd³⁺ is transferred to Tb³⁺ and then emission peaks of ⁵D_J→⁷F_J of Tb³⁺ were observed.     

贺力氏Multi-Lab Hvdris定氢系统使用探讨及影响因素

本文主要介绍贺力氏Multi-Lab Hvdris定氢系统使用探讨及影响因素。     

贵冶VPSA制氧机作业率攻关与改造

阐述了江铜贵溪冶炼厂二期工程引进的一套3800m3/h真空变压吸附制氧机(简称VPSA)的基本原理、工艺特点,分析了实际运行过程中周期短、作业率低的主要原因,采取了相应的技术改造和维护措施。     

真空开关的性能及现场测试

简要介绍了真空开关几个主要参数的现场测试及调试方法，并指出了这些参数的因素。实践表明，现场测试是考核真空开关性能的重要手段。     

论开发750 kV超高压真空断路器的必要性

简述了真空断路器的发展概况，对真空断路器与SF6断路器进行了对比分析。同时对真空断路器向750kV超高压等级发展的途径进行论述。     

一种真空热解废电缆回收装置

本装置采用真空加热裂解塑料外皮并配以对热解气体进行化学处理的方法来回收废电缆金属.本装置具有处理废电缆回收金属经济、干净,无废气、废水、废渣排放,对环境无二次污染.装置结构简单易操作,占地面积小,适合对大量废电缆回收金属使用.     

Atmospheric effects of friction,friction noise and wear with silicon and diamond. Part II. SEM tribometry of silicon in vacuum and hydrogen

Scanning electron microscope (SEM) tribometric data on polycrystalline silicon (poly-Si) vs. poly-Si, Si(100) vs. Si(100) and Si(111) vs. Si(111) interfaces, obtained in Torr and in 0.2 Torr partial pressure of hydrogen gas ( ) from room temperature to 850^°C, were performed under standard and much slower thermal ramping rates. The friction data were analyzed per the methodology described in part I of this paper series. The results indicate a highly beneficial friction- and wear-reducing regime within a relatively narrow thermal region. This desirable region coincides with some chemisorption of excited species of molecular hydrogen just before the mass thermal desorption of surface hydrides. These data represent the tribochemical equivalent of a method routinely used in electronics, whereby deep electron traps (dangling Si bonds) are passivated by baking in molecular hydrogen. The also exerts a moderating influence on the size of the friction noise at all test temperatures. However, the general level of friction beyond the beneficial thermal region is high. In parallel, the general wear rate of Si representative of the entire range of standard thermal ramping in both atmospheric environments is in the extremely high 10^-12m³/(N m) range. Operating strictly in the beneficial, low-friction thermal regime resulted in a several orders-of-magnitude reduction in the wear rate over those measured under standard thermal ramping conditions. Although the results confirm previous findings that Si is not a good material of construction for miniaturized moving mechanical assemblies (e.g., microbearings and gears), there seems to be some limited possibility of gas-phase lubrication of Si micromechanisms with rarefied hydrogen at surface temperatures between 100 and 300^°C. This revised version was published online in July 2006 with corrections to the Cover Date.     

温度与气压对LiF蒸发速率的影响

减压蒸馏技术是钍基熔盐反应堆燃料处理中回收和纯化核燃料载体氟盐(7LiF-BeF2)可选的技术。本工作使用自行设计并研制的热失重蒸发炉,通过观察燃料载体盐的主要成分LiF在减压蒸馏过程中的失重行为,研究了蒸发温度和气压对LiF蒸发速率的影响。结果表明:LiF的蒸发速率在随着蒸发温度的升高以及气压下降而增大的变化中存在着明显的拐点,蒸发速率的突变可以用熔盐在低气压条件下的沸腾来解释。并进一步讨论了熔盐的沸腾对减压蒸馏回收和纯化燃料载体氟盐的影响。     

温度极化对膜蒸馏过程的影响研究

采用直接接触式膜蒸馏，以纯水为料液，考察了材料及结构不同的5种微孔疏水膜的渗透性能．分析结果认为，膜的渗透系数和温度极化系数共同影响着膜通量的大小．实验还考察了料液温度和流率对膜通量及热效率的影响，利用膜及膜两侧边界层内传热传质理论对此进行了分析讨论．因温度极化系数随操作温度变化，可通过控制适宜操作温度获得大膜通量和高热效率．增大料液流率可强化传热，使温度极化减弱，膜通量增加．