Syntheses of TiO2 photocatalysts by the molten salts method: Application to the photocatalytic degradation of Prosulfuron

Titania photocatalysts were synthesised by the molten salts method by reaction of a titanium precursor with three different alkali metal nitrates (LiNO₃, NaNO₃, KNO₃). The titania powders obtained have been characterised using TEM, XRD, BET and UV-Vis absorption spectroscopy. Their photoactivities were evaluated by degrading a commercial sulfonylurea herbicide, Prosulfuron^®. It has been found that the rate constants increased in the following order: Li2 prepared in KNO₃, with a rate constant 1.4 times smaller than that of P25. The effect of calcination was also studied, especially for the sample prepared in NaNO₃ (TiO₂[Na]). An improvement in photocatalytic activity was observed when TiO₂[Na] was calcined in the region of 700–800 °C. Even though the photocatalytic activities obtained did not exceed or even equal to that of Degussa P25, nevertheless, this study constitutes the first attempt to synthesise titania photocatalysts by the molten salts method.     

生态型高吸水性树脂的研究

从高吸水性树脂的化学结构出发，论述了树脂的降解机理和降解方法，归纳和评述了近期我国在可降解天然聚合物、丙烯酸接枝共混和丙烯酸（盐）合成聚合物方向的研究，并对未来作出展望。     

SIS-g-AN热降解性能的研究

采用热重分析法和差示热重分析法研究丙烯腈(AN)接枝热塑性弹性体SIS(SIS g AN)的热降解性能。结果得出,SIS g AN的平衡起始降解温度、平衡最大降解速率温度和平衡终止降解温度分别为659. 17, 713. 94 和740.05 K;热降解反应活化能为195.2 kJ·mol-1;热降解机理是Deceleration中的D3 降解机理;不同质量损失率下的热寿命与温度呈线性关系。     

分子生物技术在石油降解微生物研究中的应用

总结了生物法治理石油污染的局限性,介绍了几种在石油降解微生物研究中广泛应用的分子生物技术,并对该研究领域未来的发展趋势进行了预测。     

Polymer waste recycling over “used” catalysts

Catalytic degradation of high-density polyethylene (HDPE) was carried out under nitrogen using a laboratory fluidised bed reactor operating at 360 °C with catalyst to polymer feed ratio of 2:1 and at 450 °C with catalyst to polymer feed ratio of 6:1 under atmospheric pressure. The catalysts used in this study were ZSM-5, US-Y, ASA, fresh FCC (fluid catalytic cracking) commercial catalyst (Cat-A) and equilibrium FCC catalysts with different levels of metal poisoning were studied. The initial results for polymer degradation at 360 °C (catalyst to polymer ratio of 2:1) in a fluidised bed reactor in terms of the yield of volatile hydrocarbon products were: model catalysts>commercial FCC catalyst>E-Cats. However, when the process conditions more closely resembled to FCC conditions, the fresh commercial FCC catalyst was more favourable in terms of the yield of volatile hydrocarbon products. The degradation of HDPE over E-Cats although reduced was similar to ASA in product selectivity and yield, and the level of metal contamination did not affect the product stream generated. A simple economic evaluation of polymer recycling process is reported showing that a catalytic system based on E-Cats appears comparable in costs to a commercial thermal cracking plant.     

Ion‐exchange resins. II. Acrylamide crosslinked copolymers as precursors for some ion exchangers

Crosslinked copolymers of acrylamide (AA) and ethylacrylate and some ion exchangers derived from them containing either primary amine groups, obtained by the Hofmann degradation of the amide groups, or carboxylic groups, obtained by the alkaline hydrolysis of the ester groups, were studied. Divinylbenzene and N,N′‐methylenebisacrylamide were used as crosslinkers. The starting copolymers and the corresponding ion exchangers were characterized by IR spectroscopy, swelling behavior, and thermogravimetric analysis. The ion‐exchanger properties were correlated with the crosslinker nature and the chemical reactions performed on the AA copolymers. The average molecular weight between two crosslinks, determined from the swelling data in water, was compared with that calculated on the basis of the copolymerization stoichiometry only for the carboxylic cation exchangers. In this way, the preservation of the crosslink density after the hydrolysis was revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2701–2707, 2003     

Reactive‐extrusion route for the closed‐loop recycling of poly(ethylene terephthalate)

The effectiveness of the reactive extrusion technique was investigated for poly(ethylene terephthalate) to promote the concept of closed‐loop recycling, that is, the reuse of waste material in the initial application. More specifically, a chain‐extender system, consisting of pyromellitic dianhydride, polyol, and a catalyst, was employed, and its efficiency regarding the improvement of the recyclate quality was evaluated. Accordingly, rheological and thermal characterizations were performed and used as criteria of the modification induced in the polymer molecular structure during processing due to the counteracting degradation and chain‐extension reactions. In particular, the molecular weight, related to intrinsic viscosity and melt flow rate measurements, of modified poly(ethylene terephthalate) samples was found to increase with the additive content. Simultaneously, a decrease in the crystallinity was observed, attributed to the branching effect of the chain extender, which restricted the ability of the macromolecules to organize in the crystal structure. Beyond a critical concentration of the additive system, the molecular weight of the treated samples started to decrease again, and this was accompanied by a small increase in the crystallinity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1671–1678, 2007     

纳米氧化锆/氧化锌光催化降解酸性红B的研究

以醋酸锌和氯氧化锆为原料，采用化学沉淀法制备了纳米氧化锆／氧化锌光催化剂。在中性条件下研究了催化剂煅烧温度，锆复合量，催化剂用量，染料初始质量浓度，过氧化氢质量浓度，各种阴、阳离子等条件对酸性红B脱色反应的影响。结果表明，该催化剂最佳制备条件为煅烧温度350℃，锆复合量2．5％（物质的量分数）。催化剂最佳用量0．9g／L。提高染料初始质量浓度会降低反应脱色率。适量过氧化氢可提高反应脱色率，当其质量浓度超过300mg／L会起负作用。NO3^-对反应影响不大；Fe^3＋和Ag^＋对反应起促进作用；SO4^2-，Cl^-，NO2^-等阴离子和Fe^2＋，Mn^2＋等阳离子对反应起抑制作用。     

Study on pH‐sensitive and thermosensitive polymer networks containing polyacetal segments

A series of pH‐sensitive and thermosensitive polymer networks were first obtained by copolymerization of telechelic poly(1,3‐dioxolane) (PDXL) with acrylic acid (AA), acrylamide (AM), and N‐isopropylacrylamide (NIPAM), respectively. The copolymerization of PDXL diacrylate (PDXLDA) with AA, AM, or NIPAM is expected to lead to polymer networks in which homopolymeric segments of the monomer are connected by polyacetal segments. As a combination of these two parts, these polymer networks can have some interesting physical properties. For example, the copolymer networks of poly(AA‐b‐DXL) showed pH sensitivity, and both the copolymer networks of poly(AM‐b‐DXL) and poly(NIPAM‐b‐DXL) showed temperature sensitivity. Moreover, because of the low ceiling temperature of polyDXL, the networks containing polyacetal segments (PDXL) can degrade by treatment with a trace of appropriate cationic initiator. The polymer networks prepared were characterized by Fourier transform infrared, differential scanning calorimetry, and swelling data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3002–3006, 2002; DOI 10.1002/app.2329     

使用毛细管电泳定量分析黑白显影液衰退反应中的对苯二酚和对苯二酚单磺酸盐

使用毛细管电泳分离并定量分析了对苯二酚——— 1种黑白显影液中的显影剂和它的衰退反应产物对苯二酚单磺酸盐。优化了的毛细管电泳分离。