Estimation of heat of combustion of triglycerides and fatty acid methyl esters

Equations were developed for the estimation of gross heat of combustion (HG) of triglycerides (TGs) and fatty acid methyl esters (FAMEs) from their saponification number (SN) and iodine value (IV). HG of TG=1,896,000/SN − 0.6 IV — 1600 and HG of FAME=618,000/SN − 0.08 IV — 430. When these equations were tested on cottonseed oil, soybean oil, partially hydrogenated soybean oil, peanut oil, sunflower oil, sunflower oil methyl esters, soybean oil methyl esters and cottonseed oil methyl esters, predicted HG values agreed well with those reported in the literature.     

Oil monitoring methods based on information theory

To evaluate the wear condition of machines accurately,oil spectrographic entropy,mutual information and ICA analysis methods based on information theory are presented. A full-scale diagnosis utilizing all channels of spectrographic analysis can be obtained. By measuring the complexity and correlativity,the characteristics of wear condition of machines can be shown clearly. The diagnostic quality is improved. The analysis processes of these monitoring methods are given through the explanation of examples. The availability of these methods is validated and further research fields are demonstrated.     

加氢降凝组合工艺技术

抚顺石油化工研究院开发的生产低凝清洁柴油加氢降凝组合工艺,集加氢精制与临氢降凝工艺技术优点于一体,具有工艺流程简单、精制及降凝效果好、柴油收率高、原料适应能力强、产品方案灵活等特点,已在哈尔滨等炼油厂得到工业应用.     

In situ esterification of rice bran oil with methanol and ethanol

In situ esterifications of high-acidity rice bran oil with methanol and ethanol and with sulfuric acid as catalyst were investigated. In the esterification with methanol, all free fatty acids (FFA) dissolved in methanol were interesterified within 15 min, and it was possible to obtain nearly pure methyl esters. The amount of methyl esters obtained from a given rice bran was dependent on the FFA content of the rice bran oil. In the esterification with ethanol, it was not possible to obtain pure esters as in methanol esterification, because the solubilities of oil components in ethanol were much higher than those in methanol.     

Effects of silicone oil and polymeric modifiers on the mechanical properties of highly filled LLDPE

The effects of coupling agents, silicone oil, and three types of polymeric modifiers on the mechanical properties of linear low density polyethylene (LLDPE) composites highly filled with aluminium hydroxide [Al(OH)₃] were studied. Polymeric modifiers that contain polar groups, such as silane‐grafted polyethylene (Si‐g‐PE) and acrylic‐acid‐grafted ethylene‐vinyl acetate copolymer (AA‐g‐EVA), improve the mechanical properties dramatically, while nonpolar modifiers improve them to some extent. When Al(OH)₃ was treated using a titanate coupling agent, the silicone oil increased the impact strength and elongation at break of the LLDPE/Al(OH)₃ composites. Introduction of a polymeric modifier containing polar groups destroys the beneficial effects of silicone oil on film mechanical properties, while the introduction of a nonpolar elastomeric polymeric modifier retains the high impact strength and elongation at break. SEM analyses provide the indirect evidence of the encapsulation of silicone oil around the filler. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 121–128, 2002     

电控柴油机分缸均衡控制算法及试验

柴油机各个气缸的进气量、喷油量、燃烧等存在差异,导致气缸间存在做功差异,直接影响柴油机转速的平稳性以及排放性能等。针对位置式电控柴油机,采用PI闭环控制,通过瞬时转速信号识别并计算各缸的工作差异,利用分缸均衡控制算法对油量进行补偿修正。试验结果显示低转速稳态工况转速波动由7 r/min降至3 r/min,各缸工作不均匀度由±5 r/min降至±2 r/min,在瞬态过程和高转速3 400 r/min时该算法仍然适用有效。     

液压系统进、旁油路联合调速回路分析

在定量液压泵供油的系统中给出进、旁油路联合调速的回路,通过对2种进、旁油路联合调速的定量分析,推导出理论计算依据,得出这2种进、旁油路联合调速的调速特点。     

高线精轧机平衡缸漏油分析及改进

分析了广州钢铁企业集团公司高线厂精轧机平衡油缸漏油的危害和原因，指出了这种油缸在设计上存在的缺陷，并提出了改进措施，改进后漏油问题得到了解决。     

纳米Fe_2O_3作为润滑油添加剂的摩擦磨损性能

采用烧结方法制备得到纳米α-Fe_2O_3,利用X射线衍射仪(XRD)和透射电镜(TEM)对样品进行了表征,研究了纳米α-Fe_2O_3作为液体石蜡添加剂的摩擦磨损性能。结果表明,添加纳米添加剂后,润滑油摩擦系数改变不明显,但磨损率显著降低。磨损率与纳米α-Fe_2O_3添加剂的表面积和添加量密切相关,当纳米材料的表面积为47m~2/g时磨损率最低,磨损率值降低为3.78×10~(-15) m~2/g;添加量为1.0wt%,润滑油磨损率最低。     

5种药用植物挥发油对仓库害虫生物活性的研究

研究了香薷、鹤虱等５种药用植物挥发油对仓虫的生物活性作用。结果表明,香薷挥发油的作用最为明显,它（剂量０２μＬ／ｇ）及其粗分离１＃～５＃样品（剂量００５μＬ／ｇ）均有效地抑制了试虫卵、幼虫及成虫的生长发育,从而减少了试虫Ｆ１代种群的发生,其中粗分离１＃样品作用尤为突出。香薷挥发油１＃～５＃样品的主要化学成分为４,５,６,７,８,８ａ－六氢－８ａ－甲基－２［１Ｈ］－奥酮（５２６４％）、百里香酚（３０５％）和一未定成分（２１９２％）。