从催化裂化柴油中分离高纯度2,6-二甲基萘

以大庆石油化工总厂炼油厂催化柴油为原料 ,通过精馏分离得到二甲基萘 (DMN)窄馏分 (2 5 8～ 2 70℃ ) ,经糠醛溶剂抽提 ,减压蒸馏后 ,在 -10～ -2 5℃冷冻 2～ 5h ,离心分离制得纯度约 80 %的粗 2 ,6 DMN ,再经无水乙醇在 -10～ -2 5℃重结晶 ,得到纯度大于等于 98%的 2 ,6 DMN。     

应用硫酸铵提高乌拉嗄金矿石浮选回收率试验研究

经试验发现应用一种化学肥料硫酸铵可以显著提高乌拉嘎金矿石的浮选回收率。闭路试验尾矿工艺矿物学鉴定证明，以硫酸铵作为调整剂的浮选过程中，微细粒单体金和金与石英边生体被有效回收。     

粱南输油管线防垢技术的研究与应用

针对梁南结垢的具体情况，探讨了输油管线结硫酸盐垢的原因及影响因素，指出了化学防垢的可行性。室内成功研制出DY-2阻垢剂，现场应用后有效地预防了硫酸钡、锶垢的形成。     

Precipitation of barium sulfate nanoparticles via impinging streams

The impinging streams technology (abbreviated as IS) has good micromixing in the precipitation processes. The experiments were loaded with two reactants, BaCl₂ and Na₂SO₄, to prepare BaSO₄ in the impinging streams reactor, comparing with those in the direct precipitation (DP) reactor. XRD and TEM were used to analyze the crystal type, the morphology and size of particles through the photographs. The results indicate the size of the particles from IS is about 30 nm and of narrower distribution and finer dispersibility than that from DP.     

An integrated biodesulfurization process,including inoculum preparation,desulfurization and sulfate removal in a single step,for removing sulfur from oils

BACKGROUND: A single‐stage reactor, in which the growth of bacterial culture, induction of desulfurizing enzymes, and desulfurization reaction are carried out in a single step, was adopted to investigate desulfurization of dibenzothiophene (DBT) at high cell densities. Rhodococcus erythropolis, IGTS8 was used as the biocatalyst. Optimal conditions for bacterial growth and DBT desulfurization were investigated. RESULTS: Optimization of fermentation conditions was necessary to obtain high cell densities including controlling accumulation of acetate. Under optimal operating conditions, the maximum optical density at 600 nm (OD₆₀₀) was measured to be 26.6 at 118 h of cultivation. When biodesulfurization of DBT in model oil with a high cell density culture of IGTS8 was investigated, accumulation of sulfate was found to limit the extent of desulfurization. A sulfate removal step was added to obtain a single‐stage integrated biodesulfurization process. Sulfate removal was achieved via an aqueous bleed stream and use of a separation unit to recycle the organic phase. CONCLUSION: A proof of principle of a complete system capable of biocatalyst growth, induction, desulfurization and by‐product separation was demonstrated. This system enables simplification of the biodesulfurization process and has potential to lower the operating cost of the bioprocess. Copyright © 2008 Society of Chemical Industry     

高压下CO在甲醇-碳酸二甲酯中的溶解度测定

利用自行建立的高压下测定气体在液体中溶解度的装置,在温度25~75℃、压力2.00~10.00MPa条件下,首次测定了CO在甲醇、碳酸二甲酯及甲醇-碳酸二甲酯混合体系中的溶解度,并用PR方程计算了CO的气相逸度,溶解度数据符合方程f=Hx。揭示了CO在甲醇、碳酸二甲酯及甲醇-碳酸二甲酯混合体系中的溶解度规律。将亨利系数和温度进行关联,关联误差很小。这表明用此关联式可预测和推算CO在这些溶剂中的溶解度。     

利用贫软锰矿制备锰盐的研究

用二氧化硫法处理贫软锰矿，得到含硫酸锰和连二硫酸锰的溶液，继而将该溶液进行净化，除杂，浓缩，结晶处理即得工业级硫酸锰，结晶母液用碳铵沉淀即得碳酸锰产品     

甲醇气相氧化羰化合成碳酸二甲酯 Ⅲ.复合载体铜基催化剂的表征

采用X射线衍射、表面物理吸附、CO原位吸附红外光谱、X射线光电子能谱以及热重分析方法对甲醇直接气相氧化羰化合成碳酸二甲酯的复合载体铜基催化剂(Cu(Ⅱ)/Naβ-AC)的物化性能进行了表征。实验结果表明,微波辐射条件下制备的Cu(Ⅱ)/Naβ-AC催化剂中,活性组分CuC l2一方面与分子筛载体间发生了固相离子交换反应,并形成了铜分子筛物种,另一方面,可直接高度分散在复合载体表面。反应后Cu(Ⅱ)/Naβ-AC催化剂中部分Cu2+被还原为Cu+或Cu0,Cu2+的结合能峰向低结合能方向迁移,但微波辐射处理并未破坏分子筛载体的骨架结构。采用复合载体增加了催化剂的比表面积,并产生一定量的微孔,从而提高了催化剂的氧化羰化反应活性。热重分析表明,当温度低于350℃时,Cu(Ⅱ)/Naβ-AC催化剂稳定性较好。     

Solubilization of unilamellar liposomes by betaine-type zwitterionic/anionic surfactant systems

The mechanisms governing the solubilizing interactions between zwitterionic/anionic mixed surfactant systems at different molar fractions of the zwitterionic surfactant (X_zwitter) and neutral or electrically charged unilamellar liposomes were investigated. The mixed systems were formed by N-dodecyl-N,N-dimethylbetaine and sodium dodecyl sulfate in the presence of piperazine-1,4-bis-(2-ethanesulfonic acid) buffer at pH 7.20. Unilamellar liposomes formed by egg phosphatidylcholine, in some cases together with stearylamine or phosphatidic acid, were used. Solubilization was detected as a decrease in static light-scattering of liposomes. Two parameters were regarded as corresponding to the effective surfactant/lipid molar ratios (Re) at which the surfactant system (i) saturated the liposomes, Re_sat, and (ii) led to a total solubilization of liposomes, Re_sol. From these parameters the bilayer/aqueous medium surfactant partition coefficients for the saturation (K_sat) and complete bilayer solubilization (K_sol) were determined. When X_zwitter was 0.40, The Re and K parameters showed a maximum, whereas the critical micellar concentration (CMC) of these systems exhibited a minimum, regardless of the electrical charge of bilayers. Given that the ability of the surfactant systems to saturate or solubilize liposomes is inversely related to the Re_sat and Re_sol parameters, these capacities appear to be directly correlated with the CMC of the mixed systems. The similarity of both K_sat and K_sol (particularly for X_zwitter=0.2–0.8) suggests that a similar partition equilibrium governs both the saturation and the complete solubilization of bilayers, the free surfactant concentration (S_a,S_b), remaining almost constant with similar values to the CMC for each mixed system studied.     

甲醇与碳酸二甲酯共沸液的分离研究进展

综述了DMC-CH_3OH二元共沸液的各种分离方法。讨论了共沸精馏和萃取精馏的工艺流程。