Taste recognition threshold concentrations of styrene in oil-in-water emulsions and yoghurts

Taste recognition threshold concentrations (TRTC) of styrene were determined in samples of oil-in-water emulsions (30–300 g kg^?1 oil) and yoghurts (1–30 g kg^?1 fat), spiked with styrene. The observed TRTC increased linearly with increasing fat content and ranged from 0–3 to 2–1 mg kg^?1 for the emulsions and from 36 to 171 g kg^?1 for the yoghurts. Styrene equilibrium partition coefficients between emulsions and their respective vapour phases were determined. The concentrations of styrene in the continuous aqueous phase of the emulsions and yoghurts were calculated at the TRTC. The styrene concentrations in the continuous phase had constant values of about 15 g kg^?1 indicating that perception of styrene for oil-in–water emulsions is determined by the aqueous phase of the emulsion. The concentrations of styrene in the vapor phases above the emulsions and yoghurts were also calculated and were found to be constant at the TRTC. This relationship probably resulted from the equilibrium of distribution of styrene between the respective phases. Commercial yoghurt packed in polystyrene beakers contained styrene levels in the range 2–11 g kg^?1, much lower then the TRTC reported.     

In situ FTIR spectroscopy on rhodium-exchanged NaX zeolite with different metal dispersion during syngas reaction

In situ FTIR spectroscopy has been applied to study the reason of the different selectivity behaviour of rhodium in the CO hydrogenation reaction in dependence on the different particle size. Several forms of molecularly adsorbed CO are observed, such as linearly- and bridgedbonded CO on metallic rhodium as well as dicarbonyl species with Rh(I) centres formed by oxidation of Rh(0) with protons in presence of CO. Furthermore, non-reactive formate, acetate, and carbonate species are produced as side products of the reaction. The higher selectivity to oxygenates, particularly to methanol, is explained by the existence of multiple-bonded CO present only on small rhodium crystallites. The multiple-bonded CO formed at low temperatures is converted at higher temperatures to the highly reactive formyl species, which is hydrogenated to methanol.     

激光对望远系统损伤的研究

本文对激光光束通过望远系统后光束的变化进行了分析，并对６倍望远镜进行了激光损伤和破坏的实验研究，实验结果表明，激光对望远系统的损伤破坏主要是热效应所致，损伤破坏的情况与激光的能量，波长，脉冲宽度和望远系统的结构有关。     

Colour extension properties of individual pigments and effects on shades of foundations in cake form

The mechanism of colour change during the pigment dispersion process and during powder application to the skin surface was studied by examining the colour extension properties of Yellow. Red , and Black iron oxides in white powder bases. A new measure for the evaluation of the degree of colour extension was devised. This measure corresponded well with human visual sensation, and was found to be useful for comparing the rates of colour extension of pigments. The rate of colour extension of pigments was found to vary in the order: Yellow acicular Red granular Red Black. This result explains colour darkening and the change towards reddish tones during the pigment dispersion process, because Yellow extends fully in the early stage of the process but Red , especially in granular form, and Black continue to extend even in the later stage. Acicular Red iron oxide is more favourably employed than the granular form to attain sufficient colour extension of foundations with lower energy expenditure, and to decrease the discrepancy between the cake colour and the colour of applied powder.
Le développement des oxydes de fer et effet sur les nuances des fonds de teint compacts     

长途传输波分复用系统的设计

随着波分复用（WDM）技术的广泛应用，在工程调测和系统的运行过程中出现了由于系统的适应能力较差和灵活性不够而引起系统优化时间过长的问题，给运营商带来了许多不便，同时，WDM已经由一般的长途应用向超长距离传输和城域网方面发展，适应性和灵活性成为WDM系统网络应用的主要要求，本文将介绍WDM系统的关键技术，重点论述WDM网络设计的一些原则，最后提出WDM系统设计的注意事项。     

一种可用于可调谐环行Ti：Al_2O_3激光器的宽带单向器

本文介绍一种宽带单向器的原理及设计。选用ＴＧＧ作磁旋光介质，旋光石英晶片作补偿片，所设计的色散补偿型宽带单向器预计可在７００～１０００ｎｍ波长范围内实现环行激光腔中的单向行波运行；将其应用在可调谐环行Ｔｉ：Ａｌ２Ｏ３激光器中，获得了良好的实验结果。     

激光对CCD器件破坏时几种阈值的测量

本文简要回顾了近十年来激光CVD(LCVD)技术的发展概况及其在金属、电介质和半导体薄膜生长方面的应用情况。阐明了这种新发展起来的成膜技术不仅因其生长的低温化能够给器件带来优良的电学特性,同时也可利用其高精度的膜厚控制特性获得新结构的材料和器件。作者还对该技术的广泛的应用前景予以展望和肯定。     

双光子Jaynes－Cummings模型的亚泊松光子统计特性研究

本文利用量子电动力学理论和缀饰原于方法，对双光子Ｊａｍｅｓ－Ｃｕｍｍｉｎｇｓ模型中单模激光场的稳态亚泊松光子统计性质进行了系统研究。结果表明：激光上能级相对泵浦参量Ｘａ具有一个确定的阈值Ｘａｔ；当Ｘａ＞Ｘａｔ时，光场呈现亚泊松光子统计；而当Ｘａ＞＞Ｘａｔ时，光场将呈现出深度且完全恒定的亚泊松光子统计。     

双相位共轭镜的工作条件参数分析

本文讨论了纯扩散机制的光折变晶体用作单作用区的双相位共轭镜（ＤＰＣＭ）时的阈值耦合强度和允许的输入光强比范围，并与双作用区的情况进行比较后，给出了在输入光强比远离１的条件下，双相位共轭镜的正常工作的条件参数。     

基于类间分散度和类内集中度的文本特征选择。

特征选择是文本分类的关键步骤之一,所选特征子集的优劣直接影响文本分类的结果。论文首先定义了两种特征分类能力：一种是特征对类间文档的分散程度,该分散度越大越好;另一种是特征对类内文档的聚集程度,该集中度越大越好。然后把这两种特征影响度有机地结合起来设计了一个新的特征选择方法,该方法能够对所选特征进行综合考虑,从而使获得的特征集具有较好的代表性。仿真实验表明所提特征选择方法在一定程度上能够提高文本分类性能。