基于移位原理的顺序控制器研究

本文根据PLC顺序控制程序的设计思路,阐述了用常用集成数码移位寄存器、电力电子开关电路和少量外围电子元件构成移位控制器的原理,根据此设计思路制作的移位控制器经过在实验室环境下运行,证明了设计方案的可行性。     

隔壁精馏塔分离芳烃混合物的模拟研究

采用隔壁精馏塔分离苯-甲苯-对二甲苯物系,用Aspen Plus软件模拟了隔壁精馏塔内温度分布及液相组成分布,考察了汽相和液相分配比对产品纯度的影响。对隔壁精馏塔模拟得到的优化操作条件为:隔壁精馏塔的理论板数为30块,侧线采出在第14块理论板,进料段为15块理论板,在进料段的第7块理论板进料,进料组成n(苯)∶n(甲苯)∶n(对二甲苯)为1∶3∶1,回流比为8.8,液相分配比为2.96,汽相分配比为0.83。在此条件下,各组分的摩尔分数大于98.5%,与实验结果基本吻合。当进料组成n(苯)∶n(甲苯)∶n(对二甲苯)为1∶3∶1时,采用隔壁精馏塔可比常规两塔流程节能27.18%。     

利用双种群遗传算法进行数值试井自动拟合

遗传算法以随机化技术为指导，通过对整个解空间的高效搜索而得到全局最优解，当解空间较大时，常规遗传算法难以同时保证搜索速度和最优解的精度。针对这种缺陷提出了应用双种群遗传算法，即利用具有不同搜索策略的2个种群进行联合搜索，既保证了最优解的精度，又提高了搜索速度，将其应用于数值试井自动拟合解释，比常规遗传算法能节省50％以上的计算时间。     

异形柱框架结构设计方法分析与参数控制

近年来,异形柱框架结构(框轻结构体系),因其能较好地满足建筑使用上和结构性能上的要求,而逐步得到了推广应用,并被列为建设部首批住宅建设新技术推荐目录。但异形柱框架结构设计目前还没有可依据使用的国家标准和行业标准。本文根据对江苏省地方标准《钢筋混凝土异形柱框架结构技术规程》(DB32/512-2002)的理解,结合笔者设计实践经验,提出个人看法,供同行参考。     

Mn-containing catalytic materials for the total combustion of toluene: The role of Mn localisation in the structure of LDH precursor

Mg/Mn/Al mixed oxide systems of similar atomic ratios close to 2/0.5/1 were obtained by calcination of Mg,Al layered double hydroxide (LDH) type precursors containing Mn either in the cationic form within the brucite layer or as permanganate anions in the interlayer. The materials were characterised with PXRD, thermal analysis, XPS, ESR, TPR and BET. In mixed oxides derived from interlayer-doped precursor PXRD identified MgO–MnO solid solution and poorly crystalline Al-rich spinel phase, while those obtained from layer-doped LDH contained a better crystalline Mn-rich spinel. Surface of both materials was covered with poorly crystalline and/or amorphous Mn⁴⁺-containing phases. Higher reducibility of this surface coat in calcined layer-doped catalyst, as compared to interlayer-doped one, was attributed to the differences in the nature of underlying crystalline phases, and was considered the chief reason for the higher catalytic activity of this catalyst in the total oxidation of toluene.     

计算器时钟切换及自动关断电路的分析与改进

时钟切换和自动关断是新一代计算器集成电路档器芯片快慢时钟切换电路,详细分析了计算器的两种关断途径,在此基础上设计了一种新的关断电路.给出了这两种电路的仿真结果,证明了改进电路的正确性和高效性.     

10t双电葫芦吊车的改造

介绍了 10t双电葫芦吊车在使用过程中出现的问题 ,提出改造方案     

�͹�����Һ����񶯷���

油管柱作为油气生产中的重要工具，它的使用寿命一直是工程技术人员关注的焦点。文章从动力学中固液耦合振动的角度出发，研究了油管柱内流体不稳定流动引起的油管柱振动问题。考虑液动压力对油管柱纵向振动的影响，建立了油管柱纵向振动微分方程，并给出了这种情况下油管柱纵向振动的频率方程。通过大天池构造上一口高压气井的实例计算分析，指出井内流体不稳定流动时，油管柱会产生相当高的附加动载。这个动载是造成油管柱在生产过程中发生疲劳破坏的主要原因之一，在今后的油管柱设计中应考虑这一动载的影响     

Minimum switching control for adaptive tracking

The switching adaptive control method has been used for quite a few years to solve the adaptive stabilization and model reference adaptive control problems. However, a serious problem with the switching control method is that the number of ‘candidate’ controllers can potentially be very large, especially for multi‐input–multi‐output systems. In this paper, we consider a class of minimum‐phase multi‐input–multi‐output plants with some mild compactness assumptions. Given any polynomial reference input, we provide a switching control law which guarantees exponentially stability of the closed‐loop system with exponential tracking performance. The main contribution of the paper is that we give the minimum number of candidate controllers required for switching. In particular, the number is equal to 2 for single‐input–single‐output plants (one for each sign of the high‐frequency gain), and is equal to 2^m for m‐input–m‐output plants. That is, the number is independent of the degree and the relative degree of the plant. Copyright © 2006 John Wiley & Sons, Ltd.     

全新冷却方式双椭圆泵浦腔的实验研究

报导一种全新冷却方式的双椭圆泵浦腔，具有较高的泵浦效率和光学均匀性。１．０６μｍ调Ｑ脉冲输出能量总转换效率η＞０．７５％