天铁热力厂4#锅炉电气自动化控制系统

介绍了热力厂4^#锅炉电气系统与微机联络控制的方式。系统分别采用变频器485接口式电动机保护测控单元或接触器与微机连接，实现4^#锅炉电气控制过程。     

中压电动机传统起动方式的危害性

本通过对中压电动机的几种传统起动方式的探讨分析，阐述了使用这些方法对电网和周围其他用电设备产生的不利影响，提出了改进措施。     

绕线式异步电动机起动控制电路的改进

对传统绕线式异步电动机起动控制电路进行了改进，降低了事故率。     

离心式井下增压装置的系统设计

针对目前国内外超高压射流钻井技术采用柱塞式增压器普遍存在寿命短、工作可靠性差的问题,提出离心式井下增压装置的结构设计方案。这种增压装置由动力单元(涡轮动力机)、固液分离单元、增压单元(离心泵)和流道短节单元组成,通过钻井液驱动涡轮动力机旋转,并带动固液分离装置和离心泵高速旋转,使部分钻井液增压,达到提高射流压力和速度的目的。现场试验证明,这种离心式井下增压装置可使钻井液在井底的压力达到30MPa。     

基于嵌入式以太网的异步电机矢量控制系统体系结构设计

为了实现异步电机现场控制与上层管理的无缝集成，提出在通用变频器一异步电动机调速系统的基础上，采用基于ARM7TDMI核的微控制器和以太网控制芯片，实现异步电机的网络化控制。详细介绍了该系统的体系结构设计方案。     

电机系统综合应用实验教学的研究

分析了目前电机实验教学的现状，指出电机实验教学存在的问题，针对自动化类专业学生掌握电机及其综合应用实验的教学内容，提高应用电机的能力和基本素质等方面进行了研究。     

井下储存式电子压力计的软件设计

周静等．井下储存式电子压力计的软件设计．测井技术，１９９４，１８（４）：２８１～２８７论述小功耗井下储存式电子压力计测试系统的组成及系统软件工作原理。利用软硬件结合的方式，来达到降低功耗之目的。特别是采用了软件监视定时器，以便提高系统的稳定性。系统的特点是功耗小，抗干扰能力强，稳定性好，精度高。它与袖珍计算机ＰＣ－Ｅ５００配合进行采集，处理和绘出压力恢复曲线。     

三相异步电动机可靠性和经济分析

根据三相异步电动机的主要失效模型,利用概率分析和补充变量方法,求得了三相异步电动机的可靠性指标和运行的经济指标。     

The principle and fundamental characteristics of brushless three-phase synchronous induction motor with two stators

Brushless three-phase synchronous motor involving a rotating ac exciter on the same shaft as the motor and with the windings linked through a shaft-mounted rectifier is widely used as medium and large capacity machines. However, the motor needs to fit with damping windings for self-starting outside of the field winding in the rotor and needs to equip discharge resistance with complex electronic device to dispose of electromagnetic force induced in the field winding at starting. Therefore, the rotor structure is very complex, and there are disadvantages, especially for the robust and highly reliable motor that is desired. To solve the problem found in traditional motors, the authors proposed a brushless three-phase synchronous induction motor with two stators and one wound rotor. This problem is solved because the proposed motor is of two-stators structure: the rotor winding operates as a secondary winding of induction motor at starting and as the field winding at synchronous operation. The motor can self-start as a wound-rotor induction motor without external secondary resistance. Therefore, discharge resistance is not necessary; the starting equipment is very simple and the rotor structure is robust. It is possible to start with high torque. In this paper, the basic constitution of the proposed motor and the principles of operation are described in detail. The experimental results at starting and pulling into synchronism are shown for confirming the principles of operation and the experimental and numerical results of the starting characteristics. The load ones and the generating ones are shown and then the practical use of the proposed motor is confirmed.     

电机拆线固定装置的制作

针对传统拆线方法劳动强度大及不安全性,制作电机拆线固定装置,为车间的生产提 供安全保障。