高压射流冲击破碎岩石的有限元计算

高压射流冲击破岩是一个复杂的非线性问题。通过MSC．Marc建立模型，分别使用动态接触作为非线性冲击载荷模拟高压水射流冲击岩石。通过动力计算分析，根据岩石内部应力的变化使用Hoffman失效准则研究了岩石的破碎过程。分析表明，增加射流冲击速度可以提高射流破碎岩石的效率，当射流速度迭到某一临界值时，射流水锤作用使得岩石发生大块破碎。     

防治水泥稳定碎石基层沥青路面裂缝的措施浅析

水泥稳定碎石基层沥青路面裂缝产生的原因复杂 ,但非荷载型裂缝更为主要。防治水泥稳定碎石基层沥青路面的裂缝应该从设计和施工两方面考虑 ,其中由结构、材料组成设计 ,以及施工工艺出发控制水泥稳定碎石基层本身的收缩也是一项重要措施。     

A direct stiffness analysis of a composite beam with partial interaction

The use of the conventional semi-analytical stiffness method in finite element analysis, in which interpolation polynomials are used to develop the stiffness relationships, leads to problems of curvature locking when beam-type elements are developed for composite members with partial interaction between the materials of which it is comprised. The curvature locking phenomenon that occurs for composite steel–concrete members is quite well reported, and the general approach to minimizing the undesirable ramifications of curvature locking has been to use higher-order polynomials with increasing numbers of internal nodes. This paper presents an alternate formulation based on a direct stiffness approach rather than starting from pre-defined interpolation polynomials, and which does not possess the undesirable locking characteristics. The formulation is based on a more general approach for a bi-material composite flexural member, whose constituent materials are joined by elastic shear connection so as to provide partial interaction. The stiffness relationships are derived, and these are applied to a simply supported and a continuous steel–concrete composite beam to demonstrate the efficacy of the method, and in particular its ability to model accurately both very flexible and very stiff shear connection that causes difficulties when implemented in competitive semi-analytical algorithms. Copyright © 2004 John Wiley & Sons, Ltd.     

Application of piece‐wise linear weight functions for 2D 8‐node quadrilateral element in contact problems

The present study is a continuation of our previous work with the aim to reduce problems caused by standard higher order elements in contact problems. The difficulties can be attributed to the inherent property of the Galerkin method which gives uneven distributions of nodal forces resulting in oscillating contact pressures. The proposed remedy is use of piece‐wise linear weight functions. The methods to establish stiffness and/or mass matrix for 8‐node quadrilateral element in 2D are presented, i.e. the condensing and direct procedures. The energy and nodal displacement error norms are also checked to establish the convergence ratio. Interpretation of calculated contact pressures is discussed. Two new 2D 8‐node quadrilateral elements, QUAD8C and QUAD8D, are derived and tested in many examples, which show their good performance in contact problems. Copyright © 2004 John Wiley & Sons, Ltd.     

核磁共振谱的岩石孔喉结构分析

刘堂宴 ,王绍民 ,傅容珊 ,周明顺 ,李艳华 ,罗曼 .核磁共振谱的岩石孔喉结构分析 .石油地球物理勘探 ,2 0 0 3,38(3) :32 8～ 333岩心核磁共振 T2 谱和压汞分析数据均在一定程度上反映了岩石的孔喉结构 ,理论分析表明 ,这两组数据具有相关性。应用岩心核磁共振 T2 谱研究岩石孔喉结构 ,关键是确定 T2 与 Pc的转换系数。但以前的方法在 T2与 Pc 的转换过程中 ,需要涉及某些岩石特性参数 ,实用中有一定困难。本文直接利用岩心核磁共振 T2 谱和压汞分析数据之间的相关性 ,客观地确定 T2 与 Pc之间的转换系数 ,避免了确定岩石特性参数的困难。应用本文方法 ,对 6块岩心的多种核磁共振分析数据进行了对比分析 ,做出了 NMR (Nuclear Magnetic Resonance,简称NMR) T2 毛管力曲线和孔喉半径分布 ,并将这些结果与压汞分析的结果进行了对比。结果表明 ,岩心 NMR T2谱在实用性和评价精度上均略显优势 ;至少是在饱含油的条件下 ,岩心的 NMR T2 谱可以用于研究孔喉结构分布 ,油气的弛豫特性作为影响背景值存在 ,对于评价结果没有明显的影响 ;在全部 6块岩心中 ,T2 与 Pc 的转换系数位于 2 5 0 0～ 4 0 0 0μs· MPa之间。     

筒体结构连续化模型的弹性动力时程分析

本文用连续化模型对高层筒体结构在地震作用下的动力时程反应进行分析．     

聚四氢呋喃及其下游产品的开发应用

本文论述了聚四氢呋喃技术进展、氨纶弹性纤维发展现状和国内外聚四氢呋喃产能和需求。     

盖层封闭能力的灰聚类评价方法

提出灰聚类评价方法，用于盖层封闭能力定量评价。所有被评价对象构成聚类对象集，所有评价指标构成评价指标集，所划分的盖层封闭能力等级构成聚类的灰类集，按照最大聚类权确定对象所属的灰类，即盖层的封闭能力级别。评价流程是：确定指标灰类模式→数据预处理→利用聚类公式计算→利用最大聚类权准则抉择。这种方法避免了加法评分法要依靠人的主观经验划定总评分值的问题，而且由于把评价对象视为“灰”的，具有处理边缘信息的能力。以琼东南盆地３个主要探区的盖层封闭性评价为例，介绍了灰聚类评价的具体应用方法。灰聚类评价方法同样可用于储集层评价、圈闭评价等地质问题的定量研究。表２参３（王孝陵摘     

Laminated beams subjected to transverse load

A simple elastic solution has been developed for predicting the shear stress distribution in a laminated beam subjected to a variety of transverse loading conditions. Photoelastic tests on composite models involving a single bonding layer have been used to validate the theory, and also to comment upon the significance of these results in interpreting the interlaminar shear strength and bending modulus of the simplest form of laminated strip.     

从实例看花岗岩地基勘察的几个特点

以花岗岩类的硬质岩作为建筑物基础持力层,具有承载力高、稳定性好,抗震性强的特点,被许多重要建筑物所采用,尤其是沿海地区的高层建筑物。但往往此类基岩的层面不够“平整”,基岩层面的变化对基础的设计、施工,尤其是桩基础影响很大。本文通过对某高层建筑进行地基勘察的实例,总结了花岗岩地区风化岩层的几个特征及其在工程勘察中需注意的一些问题。