关于复杂黄铜的等效方法及其它

在复杂黄铜等效变换的多元变化过程中，存在着第三种当量系数Ｉ。它是确保合金转化为二元形式所必不可少的导向给定值，是一个定位常数。找出了Ｋ＋Ｊ＝０的误解的产生原因，论证了Ｋ＋Ｊ＝１所在达的过程的实质。指出用二元相图理解等效变换这一三元变化过程的认识误区。     

等效梁法及其在柔性铰链机构中的应用

文章讨论了等效梁法的基本原理，然后以双平行四杆柔性铰链机构为例分析其位移性能；采用该方法进行有限元建模，一个柔性铰链由4个梁单元组成，因而，整个柔性铰链机构的单元数很少。分析结果表明：等效梁法仿真效率高，且有很高的精度。这一点对于仿真分析复杂的柔性铰链机构非常重要。     

熔模铸造型壳抗弯弹性模量的研究

依据材料力学、陶瓷材料的有关理论和方法,分别对水玻璃型壳、硅溶胶型壳及其复合型壳在不同温度时的抗弯弹性模量进行了测试研究.结果表明,耐火材料、温度对型壳的弹性模量有较大的影响,硅溶胶型壳和复合型壳的弹性模量值比水玻璃型壳的大.     

Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy

The deposition of titanium on a titanium alloy substrate is being examined for potential use as a surface treatment for medical prostheses. A Ti6Al4V alloy was coated with pure titanium by cold gas dynamic spraying. Coatings were deposited onto samples with two different surface preparation methods (as-received and grit-blasted). The fatigue life of the as-received and grit-blasted materials, both before and after coating, was measured with a rotating-bend fatigue rig. A 15% reduction in fatigue endurance limit was observed after application of the coating to the as-received substrate, but no significant reduction was observed on its application to the grit-blasted substrate. The reduction in fatigue endurance limit has been related to the substrate-coating interface properties, the elastic modulus, and the residual stress states. This article was originally published inBuilding on 100 Years of Success, Proceedings of the 2006 International Thermal Spray Conference, (Seattle, WA), May 15–18, 2006, B.R. Marple, M.M. Hyland, Y.-Ch. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, 2006.     

在纳米压入仪上进行悬臂梁法测量弹性模量的影响因素分析

对在纳米压入仪上进行悬臂梁法测量弹性模量的主要影响因素进行了综合分析,主要包括加载系统悬置弹簧刚度、压头压入、梁沿截面宽度方向挠曲、梁支座附加挠曲等影响。在考虑这些因素的基础上,得到了悬臂梁的有效挠度,利用有效挠度与载荷之间的关系,评价悬臂梁材料的弹性模量。对单晶硅(100)悬臂梁试样进行了实验,得到其弹性模量为155GPa±9.5%GPa,与参考文献值符合较好。表明在纳米压入仪上进行悬臂梁法测量,只有综合这些影响因素后,才能获得有效、准确的弹性模量测量结果。     

Some new operational modes and parameters of stress relaxation for the viscoelastic characterization of solid polymers. III. The area ratio mode and the intrinsic “strain–clock” function

The introduced area ratio mode of operation with its corresponding parameters seems to have a fairly high sensitivity to the viscoelastic response of the solid polymer. This appeared from the fact that a good distinction among the linear viscoelastic, the nonlinear viscoelastic, and the viscoplastic ranges of behavior can be made. By using a relevant rheological modeling and its corresponding algorithmical approach, in the case of isotactic polypropylene, this material can be characterized as a morphological three‐phase material consisting of an intraspherulitic crystalline, an amorphous phase, and a interspherulitic para‐crystalline phase. In this sense, the material was simulated using two models: the Poynting–Thomson and the Maxwell–Wierchert, from where a good response of the material to the first model appeared. The so‐called intrinsic “strain–clock” function and its corresponding coefficient of strength of nonlinear viscoelastic behavior, which were relieved by the experimental data, seem to be some powerful and very practical “tools” that can give a proven suplementary characterization of the material. Finally, by this intrinsic function, the existence of permanent internal stresses, was confirmed, in an indirect way, which was mentioned in part II of this study. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 149–158, 2003     

Adhesion Mechanisms of Polyurethanes to Glass Surfaces I. Structure-Property Relationships in Polyurethanes and Their Effects on Adhesion to Glass

Polyurethanes were prepared from toluene diisocyanate (TDI), 1-4-butane diol (BDO) and polycaprolactone-based triols with varying molecular weights. Among each molecular weight triol-based urethane, hard segment content was varied from 20% to 70%. Differential scanning calorimetry, tensile testing, and Iosipescu shear testing were done on all the various urethanes prepared. Thermal characterization data revealed the dependence of phase separation on hard segment content as well as on the triol molecular weight. Tensile data and Iosipescu shear data further confirmed the observations made from the DSC data. The data further indicated that phase separation can greatly improve the modulus of cross-linked segmented urethanes. Adhesion of these urethanes to glass surface was evaluated using soda-lime float glass plate. Urethane samples were cast on the air side of the glass plates and adhesion was measured in shear mode. Adhesion data indicated that in addition to hard segment content, modulus, cross-link density, and molecular weight of the triols, phase separation seems to be a major factor in controlling adhesion. Surfaces of the failed adhesion samples were also analyzed and the failure mode was found to be cohesive, in varying degree, with the different urethane systems.     

界面扩展粘度的测量

介绍了界面扩展粘度κ的测定方法及其原理 ,列出了其相应的测定结果 ,同时对各种测定方法进行了分析与比较 ,并对它们的优缺点进行了讨论     

环氧-聚酰胺体系中增韧剂的研究

在环氧-聚酰胺体系中分别加入“海岛结构”QS-1、聚硫橡胶、液体丁腈橡胶增韧改性,通过对固化物剪切强度、弯曲弹性模量及断裂强度的对比,“海岛结构”QS-1增韧综合性能较好.     

用弯曲模型推导二组元复合材料杨氏模量新公式

用弯曲模型推导了适用于悬丝耦合弯曲共振法检测金属第二组元的杨氏模量的理论公式。通过实验数据计算。结果表明在两组元h2/h1≈1时与文献[2]的计算结果几乎接近，为用悬丝耦合弯曲共振法检测各种减振材料，陶瓷材料杨氏模量提供了理论公式；同时用改进后的弯曲模型推导出了适用于纤维复合材料横向杨氏模量的预测公式。