Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat treatment

The microstructural features of cold-sprayed coatings were investigated using Cu, Ti and Zn feedstocks by optical microscopy, scanning electron microscopy and transmission electron microscopy to reveal the microstructure evolution mechanisms in cold spray. Four typical effects including tamping, refinement, impact-induced fusion and annealing were examined on microstrueture. It is found that the microstructure of cold spray coating is remarkably influenced by spray materials. Ti coatings consist of evident porous layer and Cu coatings present a limited porous layer only near the surface. It is clear that the successive tamping effect and dynamic refinement of grains significantly influence the microstructure evolution of cold-sprayed coating. The tamping effect leads to the densification of porous coating layer gradually and the refinement effect leads to the formation of fine microstructure. It is considered that the large difference in the formation of porous layer is attributed to the dynamic impact pressure and hardenability of materials. It is also found that the impact-induced fusion during deposition of Zn coating can also modify the interfacial microstructure between particles in cold spray coating. Moreover, the nanocrystalline phase can be formed at the interfaces among particles resulting from the localized melting of the interfaces and tamping effect. Furthermore, the annealing treatment can modify the microstructure and property of a cold-sprayed coating.     

Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods

A study was undertaken in an attempt to quantitatively describe the rolling process of eutectoid steel rods. Finite element method was employed to model plastic flow and heat transfer in the deformed material, and heat transfer during cooling to ambient temperature. The numerical calculation gave an assessment of the strain, strain rate and temperature distributions in the work piece. This allowed the prediction of the austenite microstructure evolution during the process. Finally, the relationships describing the microstructure-mechanical properties were used to quantitatively characterize the influence of processing parameters on strength of rods after rolling.     

CORDIS无机粘结剂的特性与试验

介绍了德国HA公司最新研制的CORDIS无机粘结剂的组成与性能以及应用中的问题。     

偏晶合金液-液相变过程模拟

建立了能描述在弥散相液滴形核、扩散长大、碰撞凝并及两液相空间分离等因素共同作用下，偏晶合金液-液相变过程中组织演变过程的数学模型。将计算的温度场和浓度场与控制凝固组织演变的动力学方程相耦合，模拟研究了单向冷却条件下Al-Pb合金液-液相变过程中的组织演变过程。结果表明，随着冷却的进行，液-液相变区不断由试样底部向试样顶部推进，直至贯穿整个试样。由于在凝固过程中弥散相液滴进行Marangoni迁移和Stokes运动，试样中的某些部位会出现液滴贫化、过饱和度增加和多次形核现象。     

对涂料发展史及其系统的探讨

提出了涂料发展的三个时期与四个阶段的理论。同时指出,伴随涂料不断发展过程,发生了四次概念更新。在此基础上,提出了广义涂料概念和涂料大系统的新观点,以及建立涂涂层系统料新的理论体系的设想.     

金属塑性成形过程的微观组织模拟与优化技术研究现状

介绍了金属塑性成形过程中微观组织演变的数学模型和常用的微观组织优化目标函数 ,给出了金属塑性成形微观组织模拟和优化的主要方法———微观遗传算法和灵敏度分析方法的基本原理 ,叙述了近年来国内外金属塑性成形微观组织模拟与优化研究概况。     

挤出工程和挤出理论发展史研究

在回顾挤出工程和挤出理论发展历史的基础上,作出了4点结论与建议。明确地提出要坚决打破我国存在的树脂及材料工业、制品加工工业和塑机制造工业等行业界限,根据当前知识经济时代的特点,坚持走依靠自我力量技术创新、产学研相结合的道路。