气体动压轴承动态参数测定原理

将气体动压轴压简化为转化气膜系统后，针对其动力特点，给出气膜在微幅振动下动压轴承的实用数学模型和测定动态参数的方法，并进行了测量误差的修正。     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

我国化肥催化剂工业现状

全国48家化肥催化剂制造厂总能力为57Kt/a,产量近30kt/a,设备利用率不到50%。平均万吨氨耗催化剂10.36t,高于国外5.60t水平。现生产31个品种203个型号的催化剂中有103种经部级鉴定,但经常使用的约50种。目前化肥催化剂工业水平与国外相比还存在四方面差距。     

软土地基油罐底板变形分析

分析了造成油罐底板变形的原因、形式及其危害，结合工程实例，提出了减少油罐底板不均匀变形的措施。     

应用WCA微扰理论推算非极性液体比热容的新方法

本文首次将统计热力学的Ｗｅｅｋｓ－Ｃｈａｎｄｌｅｒ－Ａｎｄｅｒｓｏｎ（简称ＷＣＡ）微扰理论应用于非极性液体定容比热容和定压比热容的推算，用一些液体的ｐ－ｖ－Ｔ实验数据拟合了理论中所用ＬＪ势能函数的势能参数，并提出一个通用关联式。本文方法具有通用性，在编制的计算程序中只需输入物质的临界温度、临界比容、偏心因子等就能算出相应的比热容，工程应用十分方便。     

Heat capacities of polyethylene and linear fluoropolymers

Heat capacities at constant pressure, C_p, and at constant volume C_v, were calculated with the help of normal mode frequency spectra and compared to experimental data for crystalline or semicrystalline polyethylene, poly(vinyl fluoride), poly(vinylidene fluoride), polytrifluooroethylene and poly(tetrafluoroethylene). A calculation scheme using a Tarasov function for 2N skeletal vibrational modes and an approximation of the residual 7N normal modes from known data on polyethylene and polytetrafluoroethylene is developed for all homologous, linear fluoropolymers. N is the number of carbon backbone atoms of the repeating unit. Calculations can be carried out over the whole temperature range 0 K to melting. For the two theta temperatures and the constant A₀ used for C_v to C_p conversion, fluorine-concentration dependent curves are given. The relations are expected to hold also for copolymers and blends of intermediate fluorine contents. Recommended experimental (data bank) heat capacities agree to ±2.5% with the calculations.     

金安金沙江悬索桥隧道式锚碇变形破坏机制研究

隧道式锚碇的变形破坏机制涉及到结构与围岩的协同作用问题。以华丽高速公路金安金沙江悬索桥两岸隧道锚变形破坏机制为研究对象,利用工程类比法评价了其稳定性控制要素,设计了超载数值试验。根据塑性区的扩展过程确定了施工安全监测和需要采取预加固的重点部位,确定了隧道锚围岩的破坏模式。根据锚面监测点位移由mm到cm量级突变确定的两岸锚岩系统极限荷载均为6~8倍设计缆力,则锚岩系统的设计承载力取3倍设计缆力下变形安全是有保障的。丽江岸塑性区在10 P下贯通;华坪岸塑性区在14 P下贯通。设计缆力作用下,丽江岸锚碇最大位移1.5 mm、围岩1.2 mm、地表0.5 mm;华坪岸锚碇最大位移1.7 mm、围岩1.5 mm、地表0.7 mm,其响应顺序为后锚面监测点前锚面监测点锚碇中间岩体地表点,可作为后期结构及围岩安全监测布点和预警的参考,也证明当前设计缆力下变形和强度均是安全的。     

Electrochemical and surface-enhanced Raman spectroscopy studies of 4-phenylpyridine adsorption at the gold/solution interface

The adsorption of 4-phenylpyridine (4-PhPy) on the Au electrode was examined using conventional electrochemical techniques: cyclic voltammetry and impedance measurements and also by surface enhanced Raman spectroscopy (SERS) in a wide range of electrode potentials. Electrochemical results indicate the strong adsorption of 4-Phpy molecules, particularly at the positively charged Au electrode. The wide shoulder of capacity close to the pzc suggests that the composition and/or the structure of 4-Phpy monolayer change with the sign of the surface charge on the electrode. Investigation of integrity of adsorbed layer, however, indicates that adsorbed molecules do not form tight, compact monolayer even in the case of adsorption from saturated solution. SERS spectra provided evidence for gradual, potential-induced reorientation of the molecular plane with respect to the surface, from nearly vertical in the negatively charged electrode, to more flat at the positively charged metal surface.     

关于中压电缆网双环接线方式供电能力的分析

结合北京地区现阶段对相关技术的规定,以实际供用电方案为例,对中压电缆网双环接线方式的供电能力进行深入讨论。通过设计环网单元划分,发现某些条件下双环网供电能力可以得到进一步提升。     

离网型太阳能光伏发电系统设计研究

离网型太阳能光伏发电系统是太阳能光伏发电系统的重要组成。它具有灵活度高、分布广、项目成本低等优点。本文主要对现有离网光伏发电系统设计过程进行分析。