泡沫酸化工艺对川中低压裂缝性油藏适应性的认识

针对川中油田经过多年的消耗式开采,各主产油田压力很低,增产改造的难度增大的发展现状,提出应用泡沫酸化工艺技术在川中低压油层增产改造的技术方案,其中分析了泡沫酸的物理特性、其在地层优良的渗流特性(滤失小、酸岩反应速度慢、返排迅速等优点),并进行了泡沫酸液体系的室内配方研究,提出了工艺设施的矿场配套研究内容.得出了泡沫酸化工艺对川中低压裂缝性油藏改造具有很强的适应性,具有推广应用的价值.     

朝阳沟裂缝性低渗透油田井网适应性研究

通过对比分析朝阳沟裂缝性低渗透油藏与裂缝主方向分别成11.5°和22.5°的两种不同井网的开发效果,表明与裂缝成11.5°的井网与裂缝匹配性较差,开发效果相对较差。并从油藏的水驱控制程度、压力传导情况、采收率及经济效益等方面研究评价了朝1.55区井网的适应性,为指导油田的加密调整,在技术和经济两方面综合评价确定了合理的井距和井网密度,并针对朝1-55区的地质特征,提出了井网和注水方式调整办法,在朝55区块实施后,取得了较好的现场试验效果。     

东江水库诱发地震探讨

阐述了东江水库基本情况，通过对库区及周围的地质构造特点、诱发地震监测，总结出东江水库地震的活动特征和诱发地震活动趋势。     

What do we learn from binding features? Evidence for multilevel feature integration.

Four experiments were conducted to investigate the relationship between the binding of visual features (as measured by their aftereffects on subsequent binding) and the learning of feature-conjunction probabilities. Both binding and learning effects were obtained, but they did not interact. Interestingly, (shape-color) binding effects disappeared with increasing practice, presumably because of the fact that only 1 of the features involved was relevant to the task. However, this instability was only observed for arbitrary, not highly overlearned combinations of simple geometric features and not for real objects (colored pictures of a banana and strawberry), where binding effects were strong and resistant to practice. These findings suggest that learning has no direct impact on the strength or resistance of bindings or on speed with which features are bound; however, learning does affect the amount of attention particular feature dimensions attract, which again can influence which features are considered in binding. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

连轧机用人字轮齿轴断裂失效分析

用宏观断口分析、化学检验、力学性能测定、低倍检查、金相组织及夹杂物评定鉴别、受力分析及强度寿命定量估算的方法，对人字轮被动齿轴端断裂失效原因进行分析，并提出改进措施。     

65MnTi盘条拉拔过程中出现断裂的原因分析

分析检验拉拔过程中发生断裂的65MnTi盘条的金相组织和断口形貌，得出结论；65MnTi金条发生断裂的原因是热轧后冷却速度过快，金相组织中出现了低温转变组织──马氏体组织；而理想的组织应为京氏体；并且最佳冷却速度为5℃／s左右。     

Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

THE FRACTURE MECHANISM OF 475°C EMBRITTLEMENT IN A DUPLEX STAINLESS STEEL

The mechanism of “475°C embrittlement” of a duplex stainless steel was investigated using finite element modelling of the stress distribution at brittle fracture initiation. Brittle fracture initiated at a critical shear stress, which increased with ferrite hardness. The fracture stress was affected by the duplex microstructure. Fracture was nucleated by deformation twins, which were identified using electron back-scatter diffraction. The ductile-to-brittle fracture transition was sensitive to age-hardening and could be described simply by the effect of age-hardening and test temperature on the yield stress.     

双重孔隙介质油藏中的吸渗排油作用

利用美国SSI公司研制的COMPN模拟软件对双重孔隙介质油藏一种重要的开采机理 吸渗排油进行了模拟研究,考察了一个基质岩块为四周裂缝所包围时.在驱动压力和毛管压力的不同平衡(驱动压力和毛管压力的相对大小)关系下的水驱油采收率和水驱油效率的变化规律.     

On basic definitions of unified fracture mechanics terminology

The adoption of unified fracture mechanics terminology (UFMT) will promote efficient communication between specialists in different fields of fracture research, harmonization of national and international standards relating to fracture mechanics, and last but not least improvement of the existing methodology for teaching and education in fatigue and fracture. In this paper the definitions of some basic and related terms included in different standards on fracture mechanics terminology are confronted with one another. Alternative definitions of the same terms are offered. By this strategy the author tries to show that the definitions of basic and related terms appropriate for the UFMT should emerge as a consequence of harmonizing a crack model with an actual crack and then both taken together with a fracture model, laboratory test methods, and failure assessment codes.Published in Problemy Prochonsti, No. 1, pp. 17–29, January, 1996.This paper is published as a matter of discussion.