预烧淬火速度对NiCuZn铁氧体性能的影响

采用传统的氧化物法制备NiCuZn铁氧体,预烧保温后采用了三种不同方式冷却,研究了冷却速度对材料微观结构和磁性能的影响。发现随着冷却速度的加快,可获得更好微观结构、更高起始磁导率、更低损耗、更高烧结密度之低温共烧材料。     

降低极薄金矿脉开采成本新途径的研究

傲汉旗撰山子金矿用人工底柱代替矿石顶底柱，铁溜井代替木溜井、《金属量》承包代替作业进尺的方法，减小了极薄金矿脉开采的损失率与贫化率，为同类矿山降低开采成本开创了一条新途径。     

输电损耗的分摊原则

在分析现有输电网损耗分配方法的基础上，针对损耗分配中的主要问题，从公平公正、快速高效、收支平衡、过程透明、经济信号、潮流基础和网络拓扑几个方面，分析并提出了输电损耗分配应该满足的主要原则，为进一步研究输电损耗的公正有效分配方法奠定了基础。     

电机中几个概念性问题的深入分析

分析了电机中铁心损耗的形成机理及其本质,讨论了直流电机电枢反应的去磁机理,明确了同步发电机准同期并列的含义,从而深刻理解有关基本概念。     

ТДГ3．15万kVA主变压器经济运行分析

根据电力变压器功率损耗的分析，找到ТДГ3．15万kVA2台主变压器的功率损耗与负荷率β的函数关系，并对该2台主变压器的经济运行进行了探讨，计算出了经济运行点。     

Molecular dynamics studies of atomic-scale tribological characteristics for different sliding systems

A slider-slab sliding model for hard-to-soft and soft-to-soft sliding systems with abrasive and non-abrasive wear conditions is used to investigate atomic-scale friction. The molecular dynamics simulation uses the Morse potential to calculate interatomic forces between atoms. Separation distance between the slider and the slab is changed to simulate repulsive and attractive interactive force fields exerted on interface between two sliding components. Effects of the interaction potential parameters on the sliding friction are investigated. The relationship of frictional force, normal force and temperature rise of the slider and the slab during sliding are established. Comparison of the hard-to-soft and the soft-to-soft sliding system are carried out and shows different tribological phenomena.     

考虑动作误差的低励限制与失磁保护定值配合方法研究

关于低励限制与失磁保护定值匹配的研究多聚焦于将其转换到同一功率平面或阻抗平面进行校核的方法,鲜有文献考虑实际装置动作特性对定值匹配结果的影响。该文从理论上详细分析各参数变化对失磁保护和低励限制的影响,提出基于装置动作误差的低励限制与失磁保护定值匹配校核原则,并论述定值失配时的定值调整方法,为当前各发电厂开展低励限制与失磁保护定值校核及整定提供了有效指导原则。     

Frictional anisotropy of oriented carbon nanotube surfaces

This report examines highly anisotropic tribological behavior of multi-walled nanotube films oriented in mutually orthogonal directions. The average values of coefficient of friction varied from extremely high values (=0.795) for vertically aligned nanotubes grown on rigid substrates to very low values (=0.090) for nanotubes dispersed flat on the same substrates. The results were insensitive to humidity, in contrast to graphite materials, and indicate that nanotubes could be utilized as both low and high frictional surfaces.     

Atmospheric effects of friction,friction noise and wear with silicon and diamond. Part II. SEM tribometry of silicon in vacuum and hydrogen

Scanning electron microscope (SEM) tribometric data on polycrystalline silicon (poly-Si) vs. poly-Si, Si(100) vs. Si(100) and Si(111) vs. Si(111) interfaces, obtained in Torr and in 0.2 Torr partial pressure of hydrogen gas ( ) from room temperature to 850^°C, were performed under standard and much slower thermal ramping rates. The friction data were analyzed per the methodology described in part I of this paper series. The results indicate a highly beneficial friction- and wear-reducing regime within a relatively narrow thermal region. This desirable region coincides with some chemisorption of excited species of molecular hydrogen just before the mass thermal desorption of surface hydrides. These data represent the tribochemical equivalent of a method routinely used in electronics, whereby deep electron traps (dangling Si bonds) are passivated by baking in molecular hydrogen. The also exerts a moderating influence on the size of the friction noise at all test temperatures. However, the general level of friction beyond the beneficial thermal region is high. In parallel, the general wear rate of Si representative of the entire range of standard thermal ramping in both atmospheric environments is in the extremely high 10^-12m³/(N m) range. Operating strictly in the beneficial, low-friction thermal regime resulted in a several orders-of-magnitude reduction in the wear rate over those measured under standard thermal ramping conditions. Although the results confirm previous findings that Si is not a good material of construction for miniaturized moving mechanical assemblies (e.g., microbearings and gears), there seems to be some limited possibility of gas-phase lubrication of Si micromechanisms with rarefied hydrogen at surface temperatures between 100 and 300^°C. This revised version was published online in July 2006 with corrections to the Cover Date.     

500 kV输电线路用复合绝缘子憎水性能分析

介绍了河北省南部电网500 kV输电线路复合绝缘子的运行与试验情况,分析了复合绝缘子憎水性能明显下降的原因。