高层次数据流的多电压低功耗综合方法

为了有效地进行算法行为描述到寄存器传输级结构描述的转换,提出一种同时考虑功能单元功耗、互连功耗和电压转换功耗的模型和基于网络流的低功耗设计方法.首先对给定的数据流图进行单电压高层次综合,然后对单电压综合结果迭代地进行多电压调整;提取每次迭代时需要调整的网络流子图,对该子图运行最小费用最大流增量算法.该方法充分利用前面迭代中得到的优化解,避免了对整个网络流的重复计算.实验结果表明,文中方法在互连功耗、电压转换功耗和总功耗等方面均有较大优化.     

三元硝酸熔盐高温粘度的计算

三元硝酸熔盐是一种重要的传热蓄热介质,粘度物性数据对其在工业中应用非常重要.但是由于硝酸熔盐熔点高,腐蚀性强,测试条件苛刻,粘度测量结果偏差较大,故利用计算方法确定熔盐粘度.本文首先通过大量实验数据拟合了纯物质KNO3,NaNO3和NaNO2的粘度,再利用Arrhenius混合规则确定的经验公式计算三元硝酸熔盐的粘度.与前人实际测量值进行比较.结果发现:利用简单经验公式估算的结果与实际测量值比较接近,表明这种熔盐热物性变化受外界影响较小,可以利用Arrhenius简单混合规则确定熔盐粘度.     

坦克设计新发展

本文提出“针对式坦克发展战略”主要内容,它要求“突破性新概念高新技术”,获得“减法设计方法”,因而形成“坦克发展新道路”.运用“系统总体取胜”的系统工程理论,处理好坦克全系统“综合”、全系统与分系统“配置”、分系统与分系统“匹配”、全系统与人及作战环境“适应”四大关系,以“相互同水平组合”替代“单项高水平爬坡”.通过“从系统总体着眼、由边际零部件突破”的途径,善于从各个部分或部件之间的结合部加以突破,实现坦克设计新发展.     

Safety assessment of the NET Predesign

Work carried out by European Associations on Safety and Environment inside the EC Fusion Technology Programme and by NET has been concentrated on safety-related guidance and on safety assessment of the NET Predesign. Emphasis has been put on analysis of accident sequences of regulatory concern up to worst case accidents, including quantification of consequences to components, systems, and plant, and of doses to the public. Probabilistic safety studies for the most important systems and broadly for the entire plant have been performed to supplement the calculated accidental doses by expectation values for their occurrence rate, and to check the relevance of the reference accident sequences selected initially by judgment. Waste masses per year of operation and for decommissioning have been quantified. For two countries and according to the practices and regulations of these countries, volumes of radioactive waste packaged for final disposal have been determined.Presented at the IAEA Technical Committee Meeting on Developments in Fusion Safety, Toronto, June 7–11, 1993.     

增材制造技术在电机中的应用综述

增材制造技术(即3D打印)因具有高设计自由度、高材料利用率、高成形效率和精度等优势,逐渐成为高效轻质高功率密度电机设计与制造的研究热点。该文旨在对3D打印电机的性能及其应用作系统性综述。首先,对3D打印电机的发展脉络进行简要概括。其次,分别对3D打印铁心、磁钢、绕组,以及散热和机械支撑结构的研究现状进行总结,并与传统工艺加工的样件进行性能对比。随后,介绍了适用于增材制造的结构设计方法——拓扑优化。最后,根据目前的研究情况归纳了3D打印电机未来的发展趋势和面临的挑战。     

Entrepreneurial acquisitions,open innovation and UK high growth SMEs

This paper examines the dynamics of entrepreneurial acquisitions undertaken by UK high growth small and medium enterprises (SMEs). While entrepreneurial acquisitions are increasingly deployed by SMEs, little is known about their antecedents, motivational drivers and organisational outcomes. Drawing on detailed case study evidence from Scotland, the key factor found to be driving these acquisitions was the desire to augment and exploit technological complementarities between the acquiring and acquired firms. Acquisition can therefore be conceptualised as an advanced stage of the outside-in ‘open innovation’ strategies proactively used within these innovative SMEs. Firms executing this strategy typically have an acute propensity for risk, a desire for close customer engagement, effective business models and strong external orientation. The work suggests that greater attention should be paid within M&A theory to the dynamics of these types of smaller scale entrepreneurial acquisitions.     

Dynamic response of Kevlar®29/epoxy laminates under projectile impact-experimental investigation

This authors of this article investigated the dynamic response of woven Kevlar®29/epoxy laminates subjected to the impact loading. The cylindrical aluminum foam projectile and steel projectile were used to exert the impulse on the laminates. Deformation/failure modes, deflections, strain histories, and failure mechanisms were obtained and discussed. The results showed that with the high toughness of Kevlar fiber, the deformation modes of the laminates exhibited some characteristics similar to the metal panel, such as large global deformation. The failure mechanisms like matrix failure, fiber splitting, and fibrillation were observed. These micron failures led to the macroscopic delamination and fracture of the laminates.     

35 T强磁场下Cernox和氧化钌温度传感器的磁致电阻效应研究

以Cernox(CX-1050、CX-1030)和氧化钌(RX-202、RX-102)温度传感器为研究对象,研究了其在0—35 T场强、0.75—69.5 K温区下的磁致电阻效应。实验结果表明:CX-1050和RX-202的磁效应和在35 T下的测量误差都随温度的变化出现正负磁效应和正负温度误差交替的现象,且低于10 K时,磁效应随温度的变化率明显增大,在35 T、4.2 K处CX-1050和RX-202的磁效应分别为-6.63%、2.21%;总体来说强磁场下受磁阻影响由小到大分别为RX-202、CX-1050、CX-1030、RX-102,尤其RX-202,在1—35 T、4.2 K以下产生的测量误差小于-0.1 K。Cernox和氧化钌温度传感器受磁场的影响都较小。     

N-polar GaN基HEMT准二维电荷传输模型仿真

建立了氮极性(N-polar)GaN基HEMT器件的准二维(Quasi-2-D)电荷传输模型,仿真研究了N-polar GaN基HEMT的直流特性。仿真结果表明,不同的极化效应会对输出特性曲线和转移特性曲线产生不同的影响,考虑自发极化效应(Psp)+压电极化效应(Ppe)、只考虑Ppe和只考虑Psp三种情况下的阈值电压分别为:-3.96V、-2.29V和-2.47V,而其对应的峰值跨导则分别为44mS/mm、41.2mS/mm和41.3mS/mm。该模型为N-polar GaN基HEMT器件仿真提供了理论参考。