超高压大容量铝电解电容器的研制

分析了大功率设备用超高压大容量铝电解电容器的特点,通过研制工作电解液、制订制作工艺及零部件设计方案,研制出的超高压大容量铝电解电容器具有损耗角正切小(tgδ为0.25)、承受纹波电流能力强(100 Hz,2.12～27.8 A)及寿命长的特点,耐久性达到85℃,5 000 h。     

微型轴流风扇噪声特性分析及试验研究

本文对微型轴流风扇噪声的产生机理进行了系统分析及教育处，并进行了实验测试。得出的分析计算结果与实验数据作了比较验证，在声压随观测角度和距离的变化关系上，两者显示出基本一致的趋势。文中以等流量为前提，对降低微型风扇噪声的一种途径作了计算，结果表明采用转轴很细的风扇，可使噪声明显降低（大于3dB）。     

Flash器件中氧化硅/氮化硅/氧化硅的特性

对普遍采用的氧化硅/氮化硅/氧化硅( ONO)三层复合结构介质层的制备工艺及特性进行了研究分析,研究了ONO的漏电特性以及顶氧( top oxide)和底氧( bottom oxide)的厚度对ONO层漏电的影响.结果表明,采用较薄的底氧和较厚的顶氧,既能保证较高的临界电场强度,又能获得较薄的等效氧化层厚度,提高耦合率,降低编程电压.     

西气东输对南水北调穿黄隧洞影响动力分析计算

西气东输管线距离南水北调工程穿黄河隧道的最近距离:河漫滩仅150 m,主河槽仅205 m.输气管线在运行过程中,存在着因误操作、管道腐蚀、自然灾害或人为破坏等因素引发事故发生爆炸的可能.对深泓区穿黄隧洞地下部分在天然气爆炸冲击波作用下的安全性进行动力分析计算,认为西气东输管道破裂引起的天然气爆炸,不会对南水北调输水隧洞产生破坏影响.     

Niobium-containing catalysts—the state of the art

This review article is devoted to the materials containing niobium, which have been discovered or developed in the past few years and exhibit the potential application in heterogeneous catalysis. Niobium oxides and mixed oxides as well as sulfides, nitrides (oxynitrides), carbides (oxycarbides), and phosphates are considered. Among the catalytic processes in which Nb-containing materials were tested, liquid and gas phase oxidation is described in details, and the role of niobium in the prevention of the catalyst from SO₂ poisoning is mentioned.     

WC/Cu复合材料制备及其高温性能

用机械合金化法结合冷变形，制备了WC／Cu复合材料，研究了冷变形后复合材料的组织特征和高温退火时韵性能变化。结果表明：烧结后的材料经冷变形，组织呈显著纤维状，WC颗粒弥散分布，密度明显提高，达到理论密度的99．2％；复合材料经600～900℃高温退火，强度和硬度略有下降，塑性则有大幅提高；900℃退火时未发生明显的再结晶，界面结合良好；所制备的WC／Cu复合材料有优良的综合性能。     

川西新场气田JS_2~1气藏测井多参数评价方法

针对川西新场气田JS12气藏开展了多参数的综合评价研究,多参数包括储层参数、裂缝参数、储层分类厚度参数。首先,开展了储层参数及裂缝参数的计算,以岩心分析结果为依据,建立了孔隙度、渗透率、含水饱和度计算模型。利用铸体薄片进行了微裂缝识别,对样品的裂缝参数和测井曲线进行相关分析,建立了测井计算裂缝参数的数学模型;其次,对储层进行聚类分析,通过聚类将储层分为三类;最后,将计算的裂缝参数、储层分类中的Ⅰ类储层厚度、孔渗饱等参数进行正态化处理,拟和测试的无阻流量与这些参数建立多元回归计算模型,即综合含气指标的数学计算模型。以综合含气指标为主要依据,进行储层综合分类和评价,指出了有利的含气区域和可供挖潜井的建议。该方法在指导气藏开发中获得了良好效果。     

Improving the Calibration of Vacuum Gas Flow – Control Leak Gauges

A new and original method of calibrating helium leaks that makes it possible to take into account the existence of a number of auxiliary phenomena is described. For this purpose, a hollow leak the purpose of which is to reproduce only desorbed gas flows, is introduced into the vacuum system of the calibration bench. Analysis of the results of corresponding cumulation measurements makes it possible to introduce corrections for these phenomena.     

用于磁场测量的高精度500A/30V零压开关直流稳流电源

研制了一种带有无源辅助网络的全桥移相脉宽调制零压开关(FB PSPWMZVS)高精度磁铁稳流电源,并在电磁铁磁场测量中得到应用,其电流稳定度在8h内优于±1×10-4。     

Monte Carlo simulation of gas phase polymerization of 1,3‐butadiene. Part II: Kinetics optimization and confirmation

Studies on the deactivations and initiations of gas phase polymerizations of 1,3‐butadiene have been achieved by Monte Carlo simulation. Initiation and deactivation control the reaction before and after the peak of the polymerization rate, respectively. The influence of polymerization temperature has been studied. Monte Carlo modeling of polymerization kinetics and mechanism was confirmed by the agreement of experimental data and simulation results of polymerizations run with a temporary evacuation of monomer. The balance of catalysts and active chains is established by both initiation and chain transfer reactions with cocatalyst, which causes a ‘pseudo‐stability’ stage. © 2003 Society of Chemical Industry