A new minimum zone method for evaluating flatness errors

A new minimum zone method for flatnes error analyis is proposed in this article. Based on the criteria for the minimum zone solution and strict rules for data exchange, a simple and rapid algorithm, called the control plane rotation scheme, is developed for the flatness analysis of a flat surface. Experimental work was performed, and some examples are given in terms of the minimum zone and least-squares solutions.     

永丰县上保水库溢洪道采用异型进口的效益

本溢洪道设计采用了异型进口水力设计的科研成果，与常规设计相比，这种溢洪道具有进口布置灵活，增加堰长，减小单宽溢流量，降低堰上溢流水头等特点，上保水库溢洪道由于采用了异型进口，在不断加工程投资和最高库水位不变的条件下，使堰顶高程提高1．39m，增加有效库容、灌溉面积分别为27．8％和27．7％，经济效益显著，由此可见，溢洪道异型进口确实是一项值得推广的工程实用技术。     

关于松辽盆地内部地体碰撞的探讨

通过对地震资料中特殊现象的解释提出了松辽盆地内部东西地体碰撞的看法,合理地解释了松辽盆地滨北地区地质现象的形成机制,并且认为地体碰撞带可能是无机生油的有利场所。     

Effects of crack size and weld metal mismatch on the has cleavage toughness of wide plates

The heat affect zone (HAZ) is in many cases considered to be the most critical part of a weldment. In this paper, the effect of crack size and weld metal mismatch on the HAZ cleavage toughness of wide plate specimens with X-groove has been investigated by the J-Q-M theories and a simple micromechanism for cleavage fracture. Two crack sizes have been studied (a/w = 0.1 and 0.3). In the analyses, the HAZ yield strength is assumed to be higher than the base metal. For each crack size, weld metal local overmatch and local evenmatch with respect to the HAZ are considered. For a given global strain, the results indicate that weld metal overmatch and evenmatch yield the same crack tip loading in terms of J-integral for a/w = 0.3. For a/w = 0.1, overmatch gives lower crack tip loading than evenmatch. For a given crack tip loading, weld metal local evenmatch in general results in less effective crack tip loading than the overmatch. Overmatch is detrimental to HAZ toughness, but this detrimental effect becomes less significant when the crack size decreases.     

石灰竖窑工作衬砖蚀损机理的探讨

阐述了石灰竖窑的预热带、煅烧带和冷却带工作衬砖蚀损机理，并讨论了如何根据耐火砖性能和石灰竖窑不同区域的蚀损机理，选择耐火材料。     

超高纯铜的制备方法和应用

简要介绍了超高纯铜(UHPC)的几种精炼方法，以及它在工业方面的应用。并对超高纯铜的研究开发趋势及应用前景进行了展望。     

提高特高含水期油藏采收率的方法及应用效果

针对胜索油田二区9-10单元的层间非均质和平面非均质性，运用水动力学方法，采用周期注水及增压注水改善单元的水驱油效果。经过6a的实施，单元的开发形势趋好，单元采收率提高9.62%，增加可采储量341.5kt，对同类型非均质性油藏改善水驱油效果，提高最终采收率具有借鉴意义。     

对氧化物熔体浮区中重力对流的数值模拟

利用有限元分析方法数值模拟了界面形状对氧化物高温熔体碟形浮区中的温度分布和重力对流速率的影响，发现界面形状对重力对流速率有较大的影响，对于凸面，相对于炉圈平面5％的偏离使重力对流速率增大25％，偏离越大，重力对流速度越大，对于凹面，5％的偏离使重力对流速率减小15．7％，偏离越大，重力对流速度越小。     

Differentiation between epigeic and hypogeic fauna in gravel streams

The ‘hyporheic zone’ is described. According to the classical definition, water below the sediment surface is groundwater and the hyporheic interstitial zone is part of the phreatic system. This ignores the vertical distribution of the epigeic benthic fauna. The uppermost layer of the sediment (bed sediments) of the hyporheic zone is dominated by epigeic faunal elements and is therefore part of the surface system. In contrast to hypogeic species, the depth penetration of epigeic species is limited. Possible explanations are discussed.