牵引一制动型液力变矩器原始特性研究

 基于束流理论建立了牵引一制动型液力变矩器原始特性参数计算数学模型．对以D430型液力变矩器为原
型设计的牵引一制动型液力变矩器进行了原始特性参数计算，并将计算结果同D430型液力变矩器原始特性参数进
行了比较分析，结论合理． 对设计牵引一制动型液力变矩器具有一定的指导意义．     

轧机锁紧油缸泄漏原因分析及系统改进

济钢第一小型轧钢厂轧机液压换槽系统因工作压力增高，蓄能器压力油长期作用于锁紧缸，引起密封圈击穿、泄漏和机架不稳。通过增设定值减压阀控制油压，改进锁紧油缸结构，解决了锁紧油缸的泄漏问题，保证了轧制线的稳定，轧机作业率由85％提高到87％。     

微型液压钻的应用

介绍国外在特殊场所采用的先进钻孔技术的微型液压钻。它具有可手控的永久磁性基座、独特的刀具结构、有效的火花控制和极大的便携性,适用于特殊环境下的钻孔作业。     

Economic Model to Optimize Underground Utility Protection

The need for better protecting our vital infrastructure from being damaged or destroyed has received increased attention since the terrorist attacks on September 11, 2001. The tragedy of having thousands of innocent people die before the eyes of an entire nation awakened people to the reality of “managed” attacks of unthinkable magnitudes. However, tragedies of a smaller scale are a daily occurrence but accepted as “collateral damage” of work in an unsafe environment. This paper presents a cost-benefit analysis to address the question of how much money should be spent in protecting underground utilities from damage. During the study of an actual incident it was found that the total costs of such accidents are vastly underreported because only costs for emergency responses and repair are tallied up. This paper makes the case that a comprehensive approach for assessing the total economic impact of such incidents on the public, business, and government is the critical stepping stone to a mathematical optimization of expenditure for damage prevention. In addition, the reader will quickly realize that the use of the presented optimization model provides theoretical underpinning for the engineering profession in its effort to better protect our critical infrastructure from terrorist attacks.     

Correlation between quasi-static and dynamic crack resistance curves

The correlation between the crack resistance measured from dynamic and quasi-static J-R tests has been investigated based on test data from instrumented Charpy impact tests and quasi-static single edge notched bend (SENB) J-R tests.The method originally proposed by Aurich et al. [Analyse und Weiterentwicklung Bruchmechanischer versagenskonzepte--Lokales Risswachstum, Ermittlung des Risswiderstandsverhaltens aus der Kerbslagarbeit. BAM Forschungsbericht 192, Berlin 1993, ISBN 3-89429-329-2], to develop a correlation coefficient between the net fracture resistance of Charpy V-notch (ISO) and quasi-static compact tension tests, was extended to establish correlations between so-called ductile-brittle transition fracture resistance curves obtained from instrumented Charpy V-notched (ISO) and fatigue precracked impact tests and quasi-static SENB J-R fracture resistance tests.The correlation between the dynamic and quasi-static crack resistance with regard to practical application to fracture assessments appears to be reasonably consistent, bearing in mind the inherent scatter in crack resistance data in general. The findings of the present research project from testing of ship grade NVE 36 and pressure vessel steel to ASTM A516 Gr. 70 as well as two weldments in the NVE 36 steel, are in excellent agreement with the results of the research conducted by Aurich et al. [Analyse und Weiterentwicklung Bruchmechanischer versagenskonzepte--Lokales Risswachstum, Ermittlung des Risswiderstandsverhaltens aus der Kerbslagarbeit. BAM Forschungsbericht 192, Berlin 1993, ISBN 3-89429-329-2] for structural and pressure vessel steels to the German DIN standard steels including St 52-3, StE 355 and StE 460.     

水工隧洞内消能工的研究及应用进展

对于高水头、大流量的水电工程,以往的消能工具有一定的局限性,研究表明,把大面积遭受高速水流作用改为局部承受的消能方式,是高坝泄洪消能的一条有效途径。内消能工主要有孔板(洞塞)式消能工、旋流式消能工、消力井等3种形式。实践表明,内消能工对改善大坝下游水流流态,保护下游环境,保障下游边坡稳定等有积极作用,综合考虑,旋流式消能工具有较大优越性。对水工隧洞内部消能技术尚需开展进一步的研究与实践。     

咪唑封端扩链脲改性环氧树脂E-51/酸酐MTHPA体系性能研究

以端羟基聚环氧丙烷1000，甲苯二异氰酸酯（TDI），2－甲基咪唑为原料，合成了扩链脲TI，利用DSC，动态热机械分析仪DMA，冲击试验机及扫描电镜（SEM）等手段对TI改性的环氧树脂E－51／甲基四氢化邻苯二甲酸酐（MTHPA）固化体系的反应活性，动态力学行为，冲击性能，断裂面形态结构进行了系统研究，结果表明，改性后的E－51／MTHPA体系反应活性明显提高，固化反应峰顶温度较未改性体系降低160℃－200℃，固化反应的表观活化能由未改性体系的160．3kJ/mol降至63kJ/mol-87kJ/mol，同时与未改性体系相比，经过改性的环氧树脂固化体系冲击强度有较大的提高，在TI含量为5％时体系的玻璃化转变温度Ts达到最高，各改性体系冲击断面呈韧性断裂。     

鸡冠咀金矿废水污染预测及控制标准的探讨

本文以鸡冠咀金矿废水污染为例,论述了复杂水环境的预测模式选择和参数确定;并对水质标准进行了探讨;提出了鸡冠咀金矿废水排放的控制标准。     

低乙烯含量抗冲聚丙烯的结构表征

采用二甲苯为溶剂，将不同乙烯含量（５％￣１５％质量）的抗冲聚丙烯用特定程序进行分级，将各样品分为室温下可溶于甲苯和不可溶于甲苯的两部分。使用＾１３Ｃ－ＮＭＲ方法和ＦＴ－ＩＲ方法对各组分进行表征，明确了乙烯链段在聚丙烯链上的分布，并在此基础上提出了产生这种链结构的聚合工艺的特点。