CS3000顺控表的组态和应用

介绍CS3000系统顺控表的结构、参数定义和功能块组态,以聚丙烯加氢控制为例,描述顺控表的组态方法、顺控动作和操作步骤等。     

Investigation of fusion reactions in palladium and titanium tritide using galvanostatic,coulometric, and hydrogen permeation techniques

We describe several electrochemical methods used to investigate the possibility of cold fusion phenomena in palladium and titanium tritide cathodes. We performed long-term (up to 77 days) electrolysis experiments with electrochemical cells of the University of Utah type at current densities as high as 1 A/cm², while monitoring neutron and tritium levels. With some cells, we pulsed the current to determine if neutron bursts would result. In another cell, we used titanium tritide as the cathode to determine if D-T reactions yielding neutrons would occur. In no instance were levels of neutrons or tritium significantly above background except in the titanium tritide cell where isotopic exchange, occcurring between the electrode and the electrolyte, resulted in significant tritium levels. We also combined x-ray photoelectron spectroscopy (XPS) and electrochemical hydrogen permeation experiments to determine the effectiveness of various Pd surface treatment procedures on the resultant electrochemical hydrogen absorption efficiency. Electroanalytical and thermal desorption/gas analysis techniques indicated the maximum loading of H in Pd was to a ratio of HPd=0.8.     

智能力敏传感器的研制

针对传统的差压密度计和压力式液位计分别存在可靠性不高、不适用于介质密度经常变化的场合的问题,设计了一种基于Freescale MC9S08AW60微控制器的智能力敏传感器,详细介绍了该传感器主要电路的设计。该智能传感器实现了数据采集、信号处理、数据通信和电流环输出式数模转换功能。实际应用表明,在-20～+80℃的工作温度范围内,密度测量精度可达±5kg/m3,液位测量不受悬浮液回流和液位波动的影响,很好地满足了工业现场的应用。     

基于CC-Link总线的火车皮防冻液自动喷洒系统的设计

针对选煤厂运煤火车人工喷洒防冻液不均匀的问题,设计了一种基于CC-Link的火车皮防冻液自动喷洒系统。该系统采用CC-Link现场总线技术将多套喷洒装置和防冻液加压泵站构建成工业现场级控制网络,实现了各装置之间的联动和实时监控。实际应用表明,该系统避免了防冻液的浪费,提高了工作效率。     

选煤厂设备巡检系统设计

针对传统的选煤厂设备管理方法存在漏检漏查、无专用仪器、数据处理繁琐等问题,提出了一种新型的选煤厂设备巡检系统的设计方案。在巡检线路及设备上安装相应的感应卡,巡检人员携带巡检仪到各点读卡,把代表该点的卡号和时间记录下来,同时完成规定的巡检和数据采集工作,然后进行下一点的巡检任务;巡检工作完成后将巡检仪的数据传送到监控计算机,由巡检数据综合信息管理软件进行处理,从而达到对巡检情况进行记录和考核的目的。实际应用表明,该系统运行稳定、功能实用。     

铸态及快淬态无钴AB5型贮氢合金的循环稳定性

对AB5型LaxMm1-x(NiMnSiAlFe)49(x=0,0.45,0.75,1.00,摩尔分数)贮氢合金进行了快淬处理,研究了La含量及快淬工艺对合金微观结构及电化学循环稳定性的影响.结果表明:La含量的增加对铸态合金的循环稳定性没有明显影响,但使快淬态合金的循环稳定性下降,且快淬处理能显著提高合金的循环稳定性.当La替代量从0增加到1.00时,经300次充放循环后,铸态合金的容量保持率(Rh)从59.2%增加到59.8%;16 m/s淬速快淬态合金的容量保持率从83.9%下降到65.0%.对于x=0.45的合金,当淬速从0(铸态被定义为淬速等于0)增加到28 m/s时,容量保持率从59.8%增加到75.8%.     

二元稀土系AB5型贮氢电极合金的放电容量与晶胞体积和4f电子浓度的关系

制备了6个系列通式为AαA‘1-αB5的RE(NiCoMnTi)5贮氢电极合金(其中，AαA‘1-α为La，Ce，Pr，Nd4个元素中任意2个的组合)，测定了它们在100次循环中的最大放电容量Cmax及部分合金的晶胞体积Vcell．结果表明：Cmax主要由Vcell决定，Cmax先随Vcell的增大而增加，在Vcell≈85．66x10^-^3。nm^3时达到一极大值，然后又随Vcell的增大而减小；同时，Cmax还与4f电子浓度ne4f／naRE有关，A侧具有相同4f电子浓度的合金其Cmax随4f电子浓度的变化趋势相似．     

Hyperhomocysteinemia and Cardiovascular Disease: Is the Adenosinergic System the Missing Link?

The influence of hyperhomocysteinemia (HHCy) on cardiovascular disease (CVD) remains unclear. HHCy is associated with inflammation and atherosclerosis, and it is an independent risk factor for CVD, stroke and myocardial infarction. However, homocysteine (HCy)-lowering therapy does not affect the inflammatory state of CVD patients, and it has little influence on cardiovascular risk. The HCy degradation product hydrogen sulfide (H₂S) is a cardioprotector. Previous research proposed a positive role of H₂S in the cardiovascular system, and we discuss some recent data suggesting that HHCy worsens CVD by increasing the production of H₂S, which decreases the expression of adenosine A_2A receptors on the surface of immune and cardiovascular cells to cause inflammation and ischemia, respectively.     

多孔纤维型重整微反应器的等效电阻网络建模

针对应用于重整制氢微反应器的复杂多孔金属纤维载体（PFS）的流速场高效分析难题,建立载体中随机微通道的等效电阻网络分析模型. 基于复杂随机纤维结构的统计网络模型,将纤维载体中三维联通的随机微通道结构及与之相连的进出口腔简化为规则的网络通道结构.借鉴基尔霍夫定律,建立纤维载体的等效电阻网络模型,并确定求解方法. 纤维载体流速场实例分析的结果表明,基于等效电阻网络模型求解的纤维载体流速场与计算流体力学(CFD)方法的结果之间的皮尔森相关系数约为98%,且求解效率约为CFD方法的2.9×10⁴倍. 研究成果为多孔纤维型重整制氢微反应器的设计制造提供了新的支撑方案.     

Structural stability of single-layered LaNi4.25Al0.75 film and its electrochemical hydrogen-storage properties

AB5-based hydrogen storage thin fdms （LaNi4.25Al0.75）, deposited on Cu substrate by dc magnetron sputtering were investigated in this study. X-ray diffraction （XRD） revealed that the microstructure of the layer was in crystal form. SEM and AFM analyses proved that the film appeared to be rather rough with numerous randomly sized pores of approximately 15-40 in nm diameter. Structural stability of the film was examined by the combined analyses of DSC, XRD, and SEM, which indicated that this film maintained its structural stability below 500 K or so, and a network structure was observed on the film after being heated at 700 K for 30 min. Electrochemical hydrogen-storage properties of the films were investigated by simulated battery tests. It was found that single-layered LaNi4.25A10.75 film exhibited electrochemical hydrogen-storage properties similar to typical AB5 alloys in bulk, and the maximum discharge capacity of the film was about 220 mAh/g. After 20 charge/discharge cycles, small needle-shaped aluminium oxide was formed on some fractions of the film surface.