荆江与洞庭湖汇流区演变分析

 对荆江与洞庭湖汇流区的水沙过程变化及河道演变等进行了分析，认为其主要的影响因素是江湖关系的调整变化、洞庭湖人工围垦和泥沙淤积、江湖汇流区下游河道变化以及上游来水来沙变化等。可供江、 湖治理和三峡枢纽下游河道可能发生的演变及工程措施的研究参考。     

Research on social network influence maximization algorithm based on time sequential relationship

For the time sequential relationship between nodes in a dynamic social network,social network influence maximization based on time sequential relationship was proved.The problem was to find k nodes on a time sequential social network to maximize the spread of information.Firstly,the propagation probability between nodes was calculated by the improved degree estimation algorithm.Secondly,in order to solve the problem that WCM models based on static social networks could not be applied to time sequential social networks,an IWCM propagation model was proposed and based on this,a two-stage time sequential social network influence maximization algorithm was proposed.The algorithm used the time sequential heuristic phase and the time sequential greedy phase to select the candidate node with the largest influence estimated value inf (u) and the most influential seeds.At last,the efficiency and accuracy of the TIM algorithm were proved by experiments.In addition,the algorithm combines the advantages of the heuristic algorithm and the greedy algorithm,reducing the calculation range of the marginal revenue from all nodes in the network to the candidate nodes,and greatly shortens the running time of the program while ensuring accuracy.     

用红外热成像技术检测外墙空鼓时的影响因素分析

红外热成像技术在建筑工程领域具有十分广阔的应用前景。采用H2640型红外热像仪和NS9200 Report Generator分析软件对利用红外热成像技术检测外墙空鼓时的影响因素进行了归纳和分析。通过探讨天气、拍摄角度和图片分析软件对检测结果的影响,提出了拍摄红外图像的最佳时间,确定了最佳拍摄角度;对图片分析软件的误判因素和level＆span的范围标定等进行了分析,并提出了相应的处理措施。     

任务联盟演化过程行动策略优选的DINs建模

优化选择一定的行动策略能促使任务联盟向期望的目标效果演化。考虑部分事件/行动在不同时段下影响强度不相一致, 使用考虑影响值时变的动态影响网(DINs)对联盟演化过程行动策略优选问题进行建模, 给出因果强度逻辑下概率传播参数设计的一致性条件, 并基于因果强度逻辑进行影响值计算。结合空中进攻作战想定案例进行仿真验证, 计算结果表明, 通过部分事件/行动节点影响值变化下进行策略优选提高了对因果关系的建模能力。     

An adaptive approach for handling two‐dimension influence maximization in social networks

To synthetically and dynamically make strategic choices in social networks, a novel adaptive approach to deal with two‐dimension influence maximization problem (TIMP) is proposed with game‐based diffusion model, which can achieve trade‐off between diffusion time and the number of active nodes. At first, TIMP model is synthetically formulated, and diffusion time and the number of active nodes are defined mathematically. In particular, budget efficiency is presented to describe TIMP in order that an appropriate trade‐off between diffusion time and the number of active nodes can be reached. Then, an adaptive heuristic (A‐Heuristic) scheme is proposed to dynamically determine the initial seed nodes (ie, the most influential nodes). Finally, experiments are performed, and their results verify the superior performance of the proposed scheme in terms of budget efficiency, running time, and the number of active nodes.     

高溜井卸矿冲击气流产生规律及其影响因素的数值模拟

高溜井卸矿过程中产生的冲击气流是卸矿硐室及其附近巷道产尘的主要原因,本文采用考虑气固两相间双向耦合作用及颗粒间碰撞作用的密相DPM模型进行模拟,对气相和颗粒相分别采用欧拉法和拉格朗日法建立控制方程,数值模拟研究高溜井卸矿时冲击气流产生及其与各影响因素之间的关系。计算结果表明：冲击风速随卸矿流量的增加而增加,但其增幅随卸矿流量增加而减小,最大冲击风速与卸矿流量成近似幂函数关系,且卸矿高度越大,幂指数越大,模拟得幂指数范围为0.593~0.732;卸矿高度越高,冲击气流越大,且最大冲击气流与卸矿高度的1.05次方近似成正比;矿石粒径越大,冲击气流越小,最大冲击风速与矿石粒径的-0.63次方近似成正比;多中段同时卸矿时,各中段产生的流场会相互作用,从而降低冲击气流的叠加。     

阳泉矿区煤层开采对自燃的影响及预防措施

分析了阳泉矿区三矿井田煤层开采对自燃着火的影响因素 ,探讨了预防煤层的自燃着火的开采技术措施。     

风对声定位的影响及其修正

文中针对被动声定位时风速的影响,分别对等效传播距离、风速和风向对声程差的影响、风对定角的影响及其修正开展了理论建模和仿真研究,仿真结果表明,采用修正后,5级风力下的定向精度影响小于0.3°.     

射流侵彻混凝土介质数值模拟及影响因素研究

利用Ansys/LS-DYNA有限元分析软件,对聚能射流侵彻混凝土介质的全过程进行了数值模拟,模拟结果与实验数据基本吻合。通过数值模拟计算重点分析了药型罩锥角、药型罩厚度、壳体厚度、炸高和装药长度对聚能射流侵彻效能的影响规律。研究结果表明：药型罩锥角、药型罩厚度和炸高对聚能射流的侵彻深度和侵彻孔径影响较大,而壳体厚度和装药长度对侵彻效能影响较小。     

Influence of Na on the properties of Cu-rich prepared CuInS2 thin films and the performance of corresponding CuInS2/CdS/ZnO solar cells

Using different glass substrate types the Na content in sequentially and Cu-rich prepared CuInS₂ films and corresponding CuInS₂/CdS/ZnO thin-film solar cells is varied. The purpose was to investigate the influence of different Na concentrations on absorbers and devices. While the morphology of the absorbers seems not to be affected by this variation, corresponding PL spectra differ significantly. The properties of the solar cells, however, show no dependence on the Na concentration. This implies that even though the defect chemistry of CuInS₂, sequentially prepared under Cu excess, is changed by the presence of Na this influence has no impact on properties of corresponding solar cells.