建(构)筑物机械拆除方法综述

介绍了几种常用的建(构)筑物机械拆除方法,对其工作原理、特点、应用条件及局限性加以分析和说明。     

����ʯ̿ϵ�����꾮Һ���о�

本文采用流动模拟实验方法,以渗透率损害率为评价气层损害的定量标准,对以川东石炭系为主的完井液损害程度及滤失深度进行了试验研究,并对地层损害进行了预测。     

Influence of adsorption on the measurement of diffusion coefficients by Taylor dispersion

The effect of adsorption on the measurement of diffusion coefficients by the Taylor dispersion technique is investigated by modifying the governing equation to account for reversible, nonequilibrium adsorption. The resulting two-dimensional equations are solved by an explicit finite-difference technique. Experimental data for the acridine carbon dioxide system indicated that acridine adsorbs on the walls on the tubing and these data were investigated with this model. The influence of carious parameters including the number of sites and the rates of adsorption desorption was investigated by conducting a parametric sensitivity analysis on the model. It was found that adsorption of the solute on the wall of the tubing could produce an error as high as 35% on the measured diffusion coefficient compared to the actual diffusion coellicient. Examination of the influence of each of the parameters will enable Inure investigators to reduce the effect of adsorption in the measurement of diffusion coefficients by Taylor dispersion.     

管外上升R－113流体的沸腾换热试验

详细介绍了Ｒ－１１３流体管外上升流动的沸腾换热试验，包括试验台架、流量计和温度测量的修正，以及试验数据。拟合的换热关系式为ｑ＝５２８（Ｔｗ─Ｔｓ）１．３３。     

用基团贡献法预测纯物质蒸气压

对应状态原理与基团贡献法结合，提出一个新的蒸气压估算方程（ＲＬＹＭ）。通过对烷烃、烯烃、炔烃、环烷烃、环烯烃、醇、环醇、酮、醚、芳烃、酚、萘在内的１７４种有机物质蒸气压实验数据的关联，获得了３０种基团的贡献参数值。新模型的预测精度优于现有的对应状态法，并且对高碳分子仍有较好的估算精度。总的关联误差小于１．１７％。     

红外图像序列小目标检测预处理技术

文中就如何复杂背景条件下低信噪比的小目标检测概率问题展开了讨论，提出了用空间高通滤的方法改善图像质量，达以抑制背景噪声，增强小目标的目的，并交坑通滤波和中值滤波做了一个简单的比较，随后采用分层投票表决法对目标进行检测，取得了良好效果。     

Pressure Behavior for Spherical Flow in a Reservoir of Non-Newtonian Power-Law Fluids

The pressure variations during polymer flooding of oil reservoirs for oil recovery projects can be used to analyze the flow in the reservoir which is especially useful for the partially perforated reservoirs. This paper presents a relationship between the viscosity and the shear rate which is similar to forms developed for radial flow (Odeh, A. S., Yang, H. T. ([1979]). SPEJ. AIME (Jun.) 155). The power-law viscosity model is used to give the variation of the fluid viscosity with the spherical radius for a mathematical model of unsteady spherical flow for non-Newtonian fluids with wellbore storage and skin. An analytical solution for the wellbore pressure responses derived in Laplace space is used to analyze the behavior characteristics at early and later times to interpret the well-test parameters. The pressure variations are similar to those for a Newtonian fluid at the early times, but at later times, the variation of the viscosity with the power-law exponent is important, so the pressure response differs from that for a Newtonian fluid. The solution has significance for interpreting well test parameters for non-Newtonian spherical flow.     

撞击流管式反应制备超细氧化锆粉体

我国氧化锆粉体产业目前基本上“精进粗出”，迫切需要开发氧化锆粉体备新工艺，特别是具有高附加值的纳米氧化锆粉体制备技术，液相反应沉淀法具有成本低，易于工业化等优点而成为研究的热点。本文采用撞击流管式反应新工艺，撞击流接触反应强化了过程的微观混合。实现了均匀成核，使得成核过程易于控制，而管式反应器的独特设计克服了返混，因而使得反应沉淀过程易于控制，粒子分布窄。用该工艺结合醇热处理表面改性制备的超细氧化锆粉体。平均粒径约为14nm，粒度分布窄并无硬团聚发生。该方法过程简单，易于工业化大生产。     

转子叶片在非均匀来流条件下的流体激振特性

该文通过研究得出非均匀来流对转子叶片流体激振的三个重要特征 :非均匀来流相对于转子叶片的非定常流中主频分量是产生叶片动应力的决定因素 ;非均匀来流的非均匀度 (相当于非定常流的波幅 )大小和叶片流体激振的动应力大小成正比 ;转子叶片流体的定常压力水平与叶片动应力的水平密切相关。图 4表 2     

微波热液法制备光催化TiO2功能材料

采用微波加热法，研究了钛配离子热分解水解反应的规律。结果表明，水解产物在大气气氛和300℃下煅烧2h，所得产物为锐钛型TiO2粉末。在紫外线照射下，乙酸经Ti02光催化反应12h后，残余量小于初始量的20％。