新型缓蚀剂TG500在高CO2和Cl-环境中的缓蚀行为

在高温高压高CO2和Cl^-环境中，用静态高温高压模拟试验方法对不同浓度的TGS00新型咪唑啉季铵盐缓蚀剂进行了缓蚀效率测试．结果表明，TGS00缓蚀效率随加入量增加而增加，浓度增加到0．3g／L后，缓蚀速率提高不明显．同时研究N80套管钢表面的腐蚀产物，缓蚀剂浓度较低时，以均匀腐蚀为主，加入量提高到0．3g／L时，除局部少量点蚀外，无其它明显腐蚀特征．     

亚磷酸三苯酯在A3钢表面成膜特点和结构

用扫描电镜(SEM)分析了亚磷酸三苯酯在A3钢表面所 成膜的微观形貌特征.结果表明：亚磷酸三苯酯在A3钢表面所成的膜具有三维结构.经 红 外光谱(IR)指认亚磷酸三苯酯与铁离子在A3钢表面形成配合物，由此推断了配位化合物的可 能结构.     

中性溶液中焊料-铜 电偶腐蚀缓蚀剂的研究

研究了在中性介质中,焊料-铜的接触腐蚀及苯骈三氮唑、液体硅酸钠的缓蚀效果。结果表明焊料-铜短接时,苯骈三氮唑、液体硅酸钠能明显减小阳极金属焊料的腐蚀。苯骈三氮唑、液体硅酸钠加入内燃机车冷却水添加剂配方中,抑制焊料电偶腐蚀。     

Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction

1. Introduction The solid-solid reaction used in synthesizing various kinds of electrochemical materials has many advantages, such as simple process, without using solvent, saving energy, friendly to the environment and easy to obtain good quality materials like nano-size materials. Recently, the manufacturing of electrochemistry materials has been paid more atten- tion due to its increasing needs. Therefore it is a natural interest to study the synthesis of electro- chemical materials by usin…     

钼酸铵复合缓蚀剂对LY12铝合金的缓蚀作用

采用电化学方法研究了钼酸盐、锌盐和苯并三氮唑 (BTA)对LY12铝合金在 3 5 %NaC1溶液中的缓蚀作用。结果表明 ,随着钼酸盐浓度的增大 ,缓蚀效率增大 ,达到一个最大的值后基本保持不变。钼酸盐通过抑制铝合金的阴极反应和阳极溶解实现缓蚀作用。钼酸盐与锌盐和BTA复合后 ,明显提高了对铝合金的缓蚀作用 ,表现出良好的协同效应     

Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing

Al/Cu metal joints applied for the electrical connector was joined by the friction welding method to limit the formation of intermetallic compound under optimum friction welding condition. To guarantee the reliability of the Al/Cu joints in service requirement, the effects of the intermetallic compound layer on the electrical and mechanical properties have been investigated under various annealing conditions. Two kinds of intermetallic compounds layer were formed in the joints interface and identified by AlCu and Al₂Cu. The growth kinetic of these intermetallics during the annealing can be followed by volume diffusion process. The activation energy of Al₂Cu, AlCu and total intermetallic compound (AlCu + Al₂Cu) represented 107.5, 98.42 and 110.22 kJ/mol, respectively. A thicker intermetallic compound layers could seriously degrade the electrical resistivity and tensile strength. The electrical resistivity with 21 μm thickness of intermetallic compound was 45 μΩ cm and increased to be 85 μΩ cm with 107 μm of intermetallic compound. Tensile strength remarkably decreased from 85 MPa to near zero at the annealing condition of 773 K and 129.6 ks and fracture occurred through the intermetallic compound layers.     

油井缓蚀剂研究与应用

油井缓蚀剂研究与应用崔忠兴(中原油田设计院,濮阳457001)1.前言中原油田已进入高含水期,油井系统腐蚀严重,直接影响了油田的正常生产l’].为了解决油井系统腐蚀问题,在中科院腐蚀所的专种“基础f,联合开发研制了!MC—SDeZS油井缓蚀剂.该剂以合成炔氧甲基胺和炔氧甲基季法盐衍生物,以这两种衍生物为主体成分复配辅助成分而成的水溶油分散吸附成股型缓蚀剂l’1.通过室内高温高压模拟评价试验.ZI口油井加药试验及测试表明l‘],平?...     

碳纳米管及C60和石墨氧化动力学机理函数的分析

The oxidation of carbon nanotubes, C60 and graphite was studied by thermogravimetric (TG) analysis and differential thermal analysis (DTA) technique, and the oxidation kinetic models of three carbon materials studied were analyzed by mechanism-function method. The results indicate that three carbon species adopt different oxidation mechanisms due to their different structures. The oxidation of carbon nanotubes with cylindrical structure follows contracting volume reaction mechanism [R3 mechanism, 1-(1-α)1/3 = kt], indicating that the oxidation of carbon nanotubes takes place from the ends to the center. For graphite with planar sandwich structure, the oxidation starts at the edges initially and gradually moves toward the center, which corresponds to contracting area phase boundary reaction mechanism [R2 mechanism, 1-(1-α)1/2 = kt]. The oxidation of C60 with spherical structure, however, is complex and apparently cannot be illustrated with a single kinetic model. The values of apparent activation energy     

乙烯装置急冷系统的综合治理

针对北京东方化工厂乙烯装置汽油分馏塔、稀释蒸汽发生系统以及急冷水、酸性水pH值等在运行中出现的问题，说明了问题的原因所在。通过优化操作、改造等方式对系统进行了整改，阐述了整改后的效果。     

仪器分析在聚合物类阻垢缓蚀剂研究中的应用

聚合物类阻垢缓蚀剂是工业循环冷却水中最常用的水处理剂。介绍了红外光谱仪、核磁共振仪、凝胶渗透液相色谱、扫描电镜等测试仪器在阻垢缓蚀剂研究中的应用。