3DFD Simulation of Asymmetric Wave Field by Side-wall Acoustic Tool in Open and Cased Wells

1. Introduction Side-wall acoustic logging tools, such as the Segmented Bond Tool (SBT) from Baker Atlas and the tools for open hole measurements, utilize acoustic transducers mounted on six pads to make compensated acoustic velocity and attenuation measurements which are not affected by mud weight, gas cut, fast formation effects, casing surface conditions or reasonable tool de- centralizing. Studies on the wave fields generated by these tools are very important to tool design and data int…     

Evidence of thermally induced borehole elongation: a case study at Soultz, France

When they occur, borehole breakouts are considered strong markers of principal stress directions at depth. An innovative processing method for automatically identifying breakouts from ultrasonic borehole wall images has been developed. It has been applied to data sets from two deep, sub-vertical wells (GPK1 and GPK2) at the Soultz geothermal site in eastern France. In well GPK1, below 3 km depth, compression breakouts, with a 95°±7° azimuth, increasingly occur with depth. They result from time dependent compression failure at sub-critical stress levels and are indicators of the minimum horizontal principal stress orientation. However, in the uppermost logged section of well GPK2 (1.6–2.9 km depth), continuous borehole elongations share roughly the same azimuth with so called drilling-induced fractures (164°±18° and 175°±17° azimuth, respectively). Both features concomitantly vanish with depth, together with the amplitude of the thermal perturbation induced by drilling. It is proposed that these latter borehole elongations result from a pervasive, cooling-induced, tensile micro-cracking process prior to macroscopic failure localization. They are termed thermal elongations and are indicators of the maximum horizontal principal stress orientation. Had a simple logging caliper tool been used for this work, these thermal elongations might have been confused with classical compression breakouts. A simple criterion for differentiating compression breakouts from thermal elongation is proposed.     

“新合纤”的研究开发

介绍了“新合纤”研究开发的历史过程以及“新合纤”的特征及其加工方法，讨论了“新合纤”研究开发的现状及其未来。     

重油催化裂化装置高温烟气冷却器的改造

对重油催化裂化装置原有的高温烟气冷却器进行改造的情况和改造后的烟冷器的优点进行了详细论述，并对烟冷器改造后带来的经济效益作了简要介绍。     

Insulating safety analysis of the hot-line sweeping robot

This paper presents a method of calculating the insulating safety distances for hot-line working robots at high voltage when dielectric is adulterated with conducts. Also, finite element method is adopted to calculate the electric field strength to find whether it is beyond the critical. The above methods have been applied to analyze the insulating safety of the robot for hot-line sweeping post insulators in a 220 KV substation. They have also been testified by experimentations.     

锥形凸台成形的一种叠加滑移线场力学模型

分析了锥形凸台在不同体积成形工艺中的成形机理，基于模块化思想将锥形凸台的成形过程划分为挤压成形与角部充满两个特征时段；将上述两个特征时段的滑移线场力学模型有机联结，构建了锥形凸台成形过程的一种叠加滑移线场力学模型；介绍了叠加滑移线场力学模型的应力场与变形力的求解方法。该模型丰富了金属体积成形过程的特征单元库，可套用于局部成形的应力场与变形力求解，实现局部成形的模具优化设计。     

茨21-133井CO2吞吐技术初步试验

茨榆坨油田茨13块原油属于普通稠油，1993年开始蒸汽吞吐采油，从第二轮开始效果明显变差，注汽返排率低，有效周期短，产量下降快，套管变形井增多。针对这些问题，在该区块茨21—133井进行CO2吞吐采油工艺现场试验，获得成功，增油效果明显。     

基于遗传算法的工作辊温度场参数优化模型

针对热连轧机工作辊热辊形计算中温度场模型的热交换等参数难以确定的问题 ,建立了基于遗传算法的参数优化模型 ,可以解决复杂条件下的热参数的求解问题。利用优化参数计算的轧辊温度场与实际测量结果一致。     

大庆油田葡深1井射孔及测试

葡深1井完钻井深5500m，井温高达200℃以上，射孔、测试施工难度大。经过针对性的射孔测试设计和模拟试验，成功地完成了二层射孔及测试，射孔弹发射率100％，获取了合格的地层测试资料，为该地区下步深层勘探布署提供了科学依据。     

PROFIBUS通讯协议在纺丝线变频调速系统上的应用

论述了PROFIBUS-DP现场总线技术在大庆石化分公司腈纶厂纺丝线电气控制系统改造中的成功实现，分析了PROFIBUS-DP的通讯原理，阐述了SIEMENS S7-300PLC对纺丝电控系统中24台MASTERDRIVES VC型变频器进行启动、停止以及速度给定的控制。