智能化原油及可燃气体泄漏监控系统

原有的可燃气体检测报警仪在技术上无法准确监控现场可能发生的原油或可燃气体的泄漏。为了保证油库的安全生产和科学管理，开发并应用适合油库的原油及可燃气体泄漏监控系统，具有重要意义。文章介绍了如何根据实际需要，应用工业控制计算机和仪表技术，开发智能化原油(可燃液体)及可燃气体泄漏监控系统。该监控系统已推广应用于大型油库及其它石化生产企业。实际应用证明，系统对各种可燃气体及液体泄漏均有很好的监控作用。     

Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.     

A new efficient numerical method and the dynamic analysis of composite laminates with piezoelectric layers

Firstly, a numerical method for the inversion of Laplace transform is developed and its accuracy is shown through examples. Then, a state-vector equation for the dynamic problems of piezoelectric plates is deduced directly from a modified mixed variational principle for piezoelectric bodies and its exact solution for the dynamic problems of simply supported rectangle piezoelectric plate is simply given. For multilayered hybrid plates, we derive the solution in terms of the propagator matrices. The techniques accounts for the compatibility of generalized displacements and generalized stresses on the interface both the elastic layers and piezoelectric layers, and the transverse shear deformation and the rotary inertia of laminate are also considered in the global algebraic equation of structure. Meanwhile, there is no restriction on the thickness and the number of layers. As an application of the numerical inversion of Laplace transform presented in this paper, typical numerical examples of the harmonic vibration and transient response are proposed and discussed. Since the highly accurate numerical results, they can serve as benchmarks to test various thick plate theories and various numerical methods, such as the finite and boundary element methods for transient response problems.     

辽宁省大石桥市后仙峪硼矿区成矿特征

后仙峪硼矿区地表大多为混合花岗岩覆盖。从前人们认为该岩石为岩浆岩，其下不可能存在硼矿床。通过近年对该岩石的研究分析，以及野外工作我门认为该岩石为正常地层，并经钻探验证在该岩层下发现了隐伏硼矿体。     

焦炉装煤逸散物控制实践

分析了焦炉装煤过程烟尘产生的原因，介绍了焦炉装煤逸散物控制的新方法，以及实施后的效果。     

长庆油田陕北区原油破乳剂的筛选和复配

实验考察了8种市售水溶性破乳荆对长庆油田陕北区有代表性的宝塔区、安塞和子长原油(均为低硫中间基-石蜡基原油)的脱水效果(加量100mg／L，脱水温度55℃，时间3h)。目前长庆采油一厂使用的YT-100和延炼集团使用的GT-940对这3种原油的脱水效果均较好，但对子长原油的脱水率不高，分别为69．7％和58．9％。在由所选性能较好的破乳刺组成的4种二元复配物中，GT-940 HQ96-1对3种原油的脱水效果均高于单剂，最佳配比分别为4：1，4：1，3：2；其余3种复配物则对原油有选择性，其中GT-940 YT-100相近(97．5％)；YT-100 HQ96-1仅能改善子长原油的脱水效果，配比为4：1时脱水率最高(76．4％)；SP-169 HQ96-1仅能改善宝塔区原油的脱水效果．配比3：2和2：3时脱水率最高(92．9％)。表5参6。     

Stokes问题一个矩形非协调元逼近

提出了一个新的矩形非协调混合元格式,把它应用于Stokes问题的数值逼近,得到了最优的误差估计.     

塔河渣油高温催化临氢热转化技术研究

以塔河减压渣油（简称塔河减渣）为原料，在实验室小型试验装置和中型连续试验装置上，对在较高温度条件下催化临氢热转化加工塔河减渣的工艺操作条件及改质效果进行了系统研究。采用高分散的油溶性催化剂，在高压釜反应器中考察了反应温度、反应压力、催化剂添加量、溶剂油添加量、反应时间以及助剂添加量对塔河减渣催化临氢热转化反应的转化率和缩合率的影响，优化了操作参数。在优化的操作条件下，进行了塔河减渣催化临氢热转化中型试验，得到初馏点大于524 ℃组分的裂化率为85.2%，馏分油收率为80%，金属（Ni+V）和沥青质脱除率均大于90%。     

河南油田泌阳凹陷稠油地化录井评价方法

河南油田泌阳凹陷分布有古城、井楼、杨楼、新庄4个稠油油田，各油田油质复杂，查清各区块、各层系稠油油质是开发生产的重要工作之一。通过对稠油层基本特征分析，应用地化录井参数建立了TPI评价法、原油密度评价法及原油黏度评价法。TPI评价法主要是利用原油中气态烃和液态烃与全烃比值大小划分油质类型；原油密度评价法主要利用油质重，TPI值小，反之TPI值大的关系划分油质类型；原油黏度评价法主要利用TPI反映油质组分的综合性参数的特点，建立TPI与黏度的关系。这套评价评价方法提供了快速精细评价稠油油质的新手段。