铝型材推弯工艺

通过铝型材圆环的推弯实验,研究了推弯工艺原理、变形过程,结合有限元模拟得到了和实验结果相吻合的型材厚度分布、成形零件卸载回弹后的曲率半径及型材截面畸变.结果表明:推弯零件曲率及截面畸变一致性高,成形模具结构简单且便于调整,数值模拟可以用于推弯工艺的优化分析.     

管壳式换热器流场三维数值模拟

采用多孔介质方法 ,在PHOENICS 3 3程序的基础上建立了换热器的三维流动计算模型。引入体积穿透率、表面穿透率、分布阻力等来描述换热器内的管束。模型通过计算Halle等[1] 的实验工况来进行验证 ,并尝试用于计算 2 0 0MW低温供热堆主换热器内的流场     

随机模拟在电信网性能评价中的应用

本文介绍了可在微机上实现大规模电信网践模拟的实用化软件ＳＩＭＵＮＥＴ，及基所采用的无时钟事件追踪法。该软件可用规划中的电信网络和实际网路的模拟及性能评价，也可用于不同流量控制算法的评价。文中给出一个评价实例。     

采用活性非均匀分布催化剂中变反应器的模拟计算

模拟计算表明:采用活性趋于表层的分布,可以较明显地提高国产中温变换催化剂的内表面利用率,有效地节省催化剂用量,而对“热点”温度没有多大影响。     

碾压混凝土坝施工进度与质量控制的新措施

碾压混凝土重力坝和拱坝由于连续施工的坝体混凝土体积大，施工期间需要采取较为严格的温度控制措施，而所采取的温控措施是否有效，目前尚没有一个能够用于实际施工过程的快速有效的评估方法和方式，不能根据已施工坝体内的实际情况来控制施工进度和质量。利用分布式光纤温度测量系统来快速地获得坝体混凝土内部的大量温度信息，进而实际标定温度仿真程序并通过标定过程模拟拟施工的连续碾压层，以检验其温控措施的有效性。通过坝体内部的温度、温度变化速率和梯度来达到实时控制坝体碾压上升速度、坝面和仓面养护、以及冷缝灌浆处理等目的。     

Energy and comfort: A new type for TRNSYS

Two subroutines have been developed which permit users of the TRNSYS programme to calculate the parameters of ambiental comfort (PMV and PPD).The first subroutine deals with the calculation of the view factors inside a room for all the values of the spatial coordinates and, thus, permits the average radiant temperature to be calculated in every position. The second subroutine has been developed in accordance with the indications of the ISO 7730 standard.Both subroutines have been validated and then interfaced to TRNSYS.The integrated programme has been utilised to compare the performances of different heating systems in terms of energy consumption and comfort, maintaining the temperature of the interior constant for different climatic conditions.     

Application of Rachinger''s method to separate overlapped doublets in the X-ray photoelectron spectrum

Rachinger's method of separating ₁ and ₂ doublets in X-ray emission spectra is applied for the first time to separate the superimposed doublets due to spin-orbit coupling. This method has been applied to separate closely lying doublets such as (Ag 4p_3/2and Ag 4p_1/2, (Ni 3p_3/2and Ni 3p_1/2) and (Cu 3p_3/2and Cu 3p_1/2). The intensities ratios of the separated peaks are measured and compared with the ratios obtained from a first-order calculation. An excellent agreement between the measured and calculated ratios are obtained. Residual background intensities compared with the estimated values are found to agree within certain uncertainties.     

A method for multi-parameter PDF estimation of random variables

The probability distribution function (PDF) of a random variable Z is approximated with c·e^Q(z), where Q(z) is a polynomial function and c is normalizing constant. Based upon the weighted residual method, general linear algebraic equations have been derived for the evaluation of the unknown parameters in the polynomial. Numerical examples are presented and the results show that the PDFs obtained using the proposed method converge to those obtained from Monte Carlo simulation as the number of parameters in the approximate PDF increases.     

挟沙水流中沙粒对底壁湍流猝发的影响

本文在常规的边界层方程中保留了法向压力梯度项和增加了固粒对流体的使用项，结合Ｂａｔｃｈｅｏｌｒ对交界面提供的分析方法和小扰动稳定性理论，由理论分析和计算得到了包括沙粒之类的悬浮体的尺寸，比重，流动Ｒｅ数，两相速度差以及扰动波数与水流底壁湍流猝发角的关系，计算结果与Ｒａｓｈｉｄｉ等的实验结果相符。文中所得结果有助于进一步了解江河底部水流的流动特性以及泥沙的沉积和输运机理。     

集群系统与公用网互连的仿真模型和模拟算法

在讨论ＭＰＴ１３２７信令的集群移动通信系统与国内Ｎｏ．７信令的ＰＳＴＮ网间互连，帝现两种信令配合中，研究了集群系统的仿真模型和模拟算法，同时模拟出整个集群系统的工作情况，运行结果证实了所提方案的可行性与准确性。