重介洗煤密度自控系统研究

目的：本文介绍了PLC在洗煤厂的介质密度控制中的应用,针对介质密度变化规律性不强,大滞后等特点作出调整。方法：采用VB编程语言结合专家算法的方针,提出了一个解决方案,提高了控制密度精度。结果：使物料浓度配比更加合理,趋势变化更容易让现场人员接受。结论：提高了产煤精度及生产效率,节约了能源的同时为洗煤厂创造更大的经济回报。     

液相合成纳米氧化锌及其光催化性能探讨

以硝酸锌和氢氧化钠为原料,分别以水和醇作为溶剂,采用液相直接沉淀法合成纳米氧化锌。在以水为反应溶剂条件下,研究了反应时间、反应温度、反应物浓度和反应物配比对纳米氧化锌中位径和形貌的影响,得到制备较小中位径及合适长径比纳米氧化锌的最优反应条件,即:反应时间为3 h、反应温度为70 ℃、锌离子浓度为0.5 mol/L、锌离子与氢氧根浓度比为1:2。在上述最优反应条件下,研究了不同醇溶剂对纳米氧化锌中位径、形貌及其光催化性能的影响。研究发现,随着溶剂碳链长度的增长,纳米氧化锌中位径呈现上下波动,无明显变化规律,形貌由球状向柱状发展,光催化性能总体不断减弱。     

Liquid Radial Dispersion in Liquid-solid Circulating Fluidized Beds with Viscous Liquid Medium

Liquid dispersion in the radial direction was investigated in the riser of a viscous liquid-solid fluidized bed 0.102 m in diameter and 3.5 m in height. Pressure fluctuations in the riser were also measured and analyzed to examine the behavior of fluidized particles. Effects of liquid velocity (0.15-0.45 m/s), solid circulation rate (2-8 kg/m²s), particle size (1-3 mm), and liquid viscosity (0.96-38 mPas) on pressure fluctuations and the liquid radial dispersion coefficient were determined. The infinite space model was employed to obtain the radial dispersion coefficient from the radial concentration profiles of the tracer. The pressure fluctuations were analyzed by means of autocorrelation coefficient as well as power spectral density function. The dominant frequency obtained from the autocorrelation coefficient or power spectral density function of pressure fluctuations decreases with increasing liquid viscosity or liquid velocity, but it increases with increasing particle size. The liquid radial dispersion coefficient decreases with increasing liquid velocity or viscosity, but it increases as the solid circulation rate or particle size increases. The liquid radial dispersion coefficient is related closely to the resultant behavior of fluidized particles. The radial dispersion coefficient has been well correlated with operating variables in terms of dimensionless groups.     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

弹性介质中框架结构的有限元计算分析(英文)

文章提出了一种考虑剪切变形,由经典弯杆理论发展形成的在弹性介质中框架结构的有限元计算方法.     

考虑中主应力效应Gudehus-Bauer亚塑性模型的改进

针对Gudehus-Bauer亚塑性模型不能考虑中主应力影响,在Gudehus提出的响应包络线理论基础上,提出了在模型的非线性项乘以一个考虑中主应力的因子进行改进.这种改进增加了土体剪切时的强度,改变了土体受压时的变形.新模型对中主应力的变化在中主应力参数影响程度能够有一定反映.同时将改进后的模型与中主应力参数为常量的真三轴实验进行了比较.结果表明改进后的模型可以模拟中主应力对砂土强度和变形特性的影响,能够定量预测由于中主应力影响产生的体积应变.     

肠膜明串珠菌的最适发酵培养基筛选

将肠膜明串珠菌接种在不同培养基上进行发酵培养,观察其生长状况。将使此菌种长势良好的几种培养基进行综合对比。用新培养基进行二次筛选,得到肠膜明串珠菌的最适发酵培养基。     

组合填料曝气生物滤池处理受污地表水体的挂膜启动研究

采用陶粒-沸石-活性炭组合填料曝气生物滤池,对受污地表水体的处理效能进行了研究。结果表明：在水力停留时间为6h,气水比为1：1,温度为16～24℃的条件下,陶粒-沸石-活性炭组合填料曝气生物滤池对受污地表水体的处理效果较好,出水高锰酸盐指数和氨氮浓度分别降至2mg/L左右和0．1mg／L以下,陶粒层高锰酸盐指数去除率和沸石层氨氮去除率分别稳定在50％和85％左右。     

FEM analyses for influences of stress corrosion and pressure solution on THM coupling in dual-porosity rock mass

With the models of stress corrosion and pressure solution, by Yasuhara et al., two computation conditions were designed for a hypothetical nuclear waste repository in an unsaturated dual-porosity rock mass: (i) the fracture apertures are changed with the stress corrosion and pressure solution (the porosity of rock matrix is also a function of stress); (ii) the fracture apertures and the porosity of rock matrix are constants. Then the corresponding two-dimensional FEM analyses for the coupled thermohydro-mec...     

压力敏感性材料球形孔洞动态扩展问题

为进一步研究岩土材料爆炸场的特点,采用椭圆型屈服准则和自相似假设,并结合Hopkins三区模型,研究幂硬化材料球形孔洞动态扩展问题.通过对弹性区的研究得出弹性区应力的分布和弹塑性交界处的连续条件;然后在塑性区给出一个求解动态扩展问题的非线性微分方程组;最后通过打靶法数值求解该非线性微分方程组,给出满足边界条件的数值解,并讨论材料参数对场量的影响.结果表明,椭圆型屈服准则能很好地描述压力敏感性材料中孔洞的动态扩展.