Material state remapping in computational solid mechanics

A computational procedure for remapping material state information from one finite element mesh to another is described. The procedure is useful in connection with evolving meshes for inelastic problems, as for example occur in the context of fracture simulation and adaptive mesh refinement. The proposed method is based on weak enforcement of equality between corresponding fields on the two meshes, where piecewise‐constant fields on both meshes are generalized from the quadrature‐point values. The essential algorithmic problem is that of calculating the volume partition of an arbitrary convex region with respect to a covering set of disjoint convex regions. Instead of geometrically resolving the associated intersections, the problem is herein approximated by a constrained optimization problem, which may be readily and efficiently solved computationally. This formulation is a main contribution of the paper. Computational examples are given that illustrate the effectiveness of the proposed procedure. Copyright © 2002 John Wiley & Sons, Ltd.     

气敏材料的研究进展

从气敏材料种类，制备方法，改善气敏材料缺陷的手段等方面介绍了气敏材料的研究进展，论述了气敏材料研究中的新动向，展望了它的未来发展。     

Mg-doped LiNi0.5Mn1.5O4 spinel for cathode materials

Lithium-ion batteries are becoming more and more important not only for portable electronic devices, but also in prevision of high power electric vehicles. In such an optic, deep studies regarding all the components of a secondary battery are in development. In this study, high voltage cathode materials have been selected. Crystals with spinel structure have a 3D vacancy pathway suitable for Li-ions transport. The material under study was LiNi_0.5Mn_1.5O₄ doped with magnesium replacing the nickel. Various samples were synthesized via three different routes: a solid-state method, a modified sol–gel method and a xerogel method. The structure and morphology of the powders were analyzed with HRTEM and XRD. Electrochemical tests were also performed. A wide range of particle sizes (from micro to nanosize) was the result of the different synthesis routes. Unfortunately pure materials were not always obtained. The electrochemical tests showed improvement of the material's cyclability, by reducing the particle size. The electrochemical tests further confirmed the existence of a Li_1+dMn_2−dO₄ impurity. The results are quite promising, however, further improvement of the purity of the electrode composition are needed.     

数字移动电视的现状与发展前景

随着数字电视的普及推广,数字移动电视应运而生,并得到迅速发展。数字移动电视通常安装在交通工具上,兼具移动性和数字化的特点。它突破了传统电视固定收视的局限,带来了电视传播的新概念。同时,数字移动电视根据自身传播特性,不断探索新的运营模式,并带来一系列的产业链效应,蕴含着无限商机     

广钢3#高炉大修炉渣处理工艺探讨与分析

本文对处理高炉炉渣的图拉法工艺设计进行了总结，并对广钢3#高炉使用中出现的问题做了分析，生产实践表明，该工艺安全可靠，水渣质量好，而且有利于环境保护。     

我国纳米科技的现状与展望

本文概述了纳米科技的沿革，及其在国内外发展的情况，并就我国如何进一步发展纳米科技提出了自己的想法。     

天铁炼铁技术进步

近十年来，天铁集团炼铁厂通过改善原燃料条件；优化炉料结构，提高入炉品位；采用提高炉顶压力、富氧喷煤、低硅冶炼、炉顶气象系统等多项先进技术，使高炉各项经济技术指标逐年提高。     

网络技术在中州分公司计量管理工作中的应用探讨

本文通过对中州分公司正在考虑建设的信息网建设实际情况，结合山东分公司、广西分公司取得的经验，对计量管理信息网的应用进行了探讨。     

复合绝缘子耐电腐蚀特点及其电蚀老化区域性的差异

为了了解复合绝缘子外绝缘材质电蚀老化状态和区域性的差异,对Al(OH)3耐电腐蚀机理、外绝缘材质中Al(OH)3颗粒分布状态和环境污湿因素的实际情况进行了研究。Al(OH)3颗粒分解成水蒸气、析出白色粉末状氧化铝,并催化生成二氧化碳,将使外绝缘材质逐渐微观减薄和加大表面的粗糙度,而引起电蚀老化的污湿环境因素,近期不可能得到改善,因此必然引起其电蚀老化出现区域性差异。此外,外绝缘憎水表面污珠场强变化引起的电晕也是促使电蚀老化的重要因素。     

纽柯公司2002年的运作及未来发展

介绍纽柯公司2002年的运作情况和做的几件大事：1)扩张与兼并；2)新工艺的采用；3)和外部的合作等。