炭素厂的消烟除尘和噪声控制

针对炭素制品生产过程产生的粉尘、沥青烟气、噪声等主要涉及工业卫生及环境保护等方面的问题进行剖析，并对治理方法做了简要的介绍。     

改良MEA脱碳技术在小氮厂变换气脱碳中的应用

介绍了改良MEA脱碳技术的基本原理、工艺特点以及在工业中的应用情况，实践表明，改良MEA提高了溶液的吸收能力，降低了再生热耗，解决了MEA易降解损耗等问题。     

Low cost coal-based carbons for combined SO2 and NO removal from exhaust gas

The aim of this paper is to show how a cheap carbonaceous material such as low rank coal-based carbon (or char) can be used in the combined SO₂/NO removal from exhaust gas at the linear gas velocity used in commercial systems (0.12 m s⁻¹). Char is produced from carbonization and optionally activated with steam. This char is used in a first step to abate the SO₂ concentration at the following conditions: 100 °C, space velocity of 3600 h⁻¹, 6% O₂, 10% H₂O, 1000 ppmv SO₂, 1000 ppmv NO and N₂ as remainder. In a second step, when the SO₂ concentration in the flue gas is low, NO is reduced to N₂ and steam at the following experimental conditions: 150 °C, space velocity of 900 h⁻¹, 6% O₂, 10% H₂O, 0-500 ppmv SO₂, 1000 ppmv NO, 1000 ppmv NH₃ and N₂ as remainder.It has been shown that the presence of NO has no effect on SO₂ abatement during the first step of combined SO₂/NO removal system and that low SO₂ inlet concentration has a negligible effect on NO reduction in the second step. Moreover, this char can be thermally regenerated after use for various cycles without loss of activity. On the other hand, this regenerated char shows the highest NO removal activity (compared to parent chars, either carbonized or steam activated) which can be attributed to the activating effect of the sulfuric acid formed during the first step of the combined SO₂/NO removal system.     

电解法处理利福霉素SV钠废渣分离液的研究

根据电化学原理，采用电解法，利用铁屑与炭粒作电极，处理利福霉素SV钠药渣分离液，讨论各种因素对分离液污染物作效果的影响，COD去除率可达91．8％左右，脱色率可达95％左右。     

Robust sparse principal component analysis

The model for improving the robustness of sparse principal component analysis（PCA） is proposed in this paper. Instead of the l2-norm variance utilized in the conventional sparse PCA model,the proposed model maximizes the l1-norm variance,which is less sensitive to noise and outlier. To ensure sparsity,lp-norm（0 p 1） constraint,which is more general and effective than l1-norm,is considered. A simple yet efficient algorithm is developed against the proposed model. The complexity of the algorithm approximately linearly increases with both of the size and the dimensionality of the given data,which is comparable to or better than the current sparse PCA methods. The proposed algorithm is also proved to converge to a reasonable local optimum of the model. The efficiency and robustness of the algorithm is verified by a series of experiments on both synthetic and digit number image data.     

介质阻挡放电反应器降解邻二甲苯的特性研究

采用介质阻挡放电(DBD)降解常压下流动态的邻二甲苯模拟废气,系统地考察了放电极值电压,气体的初始质量浓度、停留时间以及相对湿度等工艺参数对邻二甲苯降解的影响,并初步探讨了邻二甲苯的降解产物.实验研究结果表明:在7.0kV的放电极间电压下,邻二甲苯的初始质量浓度为1 500mg/m3,停留时间为9s,其去除率可达到80%以上.降解产物主要为CO2、H2O以及苯甲酸、苯乙酸、苯乙醛等有机物,并且经降解后产物的生物可生化性得到提高,因而为后续的等离子-生物法联合处理VOCs提供了依据.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

粘土砂旧砂再生效果与其含水量的关系

在影响粘土砂旧砂再生效果的诸多因素中,旧砂中水分含量是最重要的因素。本文就水分含量对再生效果的影响规律、再生效果最佳的水分含量等进行了研究和分析,得出了如下结论:并非含水量越低再生效果就越好,而是存在一个去泥率低谷区;再生效果最佳的适宜水分含量为1～2%。     

一种改进的应用于噪声数据中的KNN算法

基于实例的KNN算法不可避免地要依赖于数据的质量,但原始数据含有噪声,因而KNN算法的结果势必会因为数据中的噪声而受到严重的影响。事实上,大多噪声都服从一定的模型,而且模型一般是已知的。充分利用数据中的噪声模型,以减小噪声对KNN算法结果的影响。通过实验结果表明该方法是有效的。     

Dynamical responses for a vertical vibration model of a four-roller cold rolling mill under combined stochastic and harmonic excitations

Considering that random fluctuations can affect the rolling process of cold rolling mills, leading to abnormal cold mill performance and defects in the rolled product. Therefore, it is crucial to study the influence of random fluctuations on the system of cold rolling mills. In this paper, taking a model of the vertical vibration of a four-roller cold rolling mill under harmonic excitation as a prototype class for a real system, the effects of random fluctuations on the system response are analyzed. Firstly, based on the deterministic vertical vibration model of a four-roller cold rolling mill under harmonic excitation, a stochastic vertical vibration model of a four-roller cold rolling mill with random fluctuation as Gaussian white noise is introduced. Subsequently, the vertical vibration model of a four-roller rolling mill is theoretically analyzed by the averaging method and the stochastic averaging method, respectively. The effectiveness of the proposed theoretical method is verified by numerical simulation results, and the influences of harmonic excitation and random excitation on the system response are also investigated in detail. Finally, the results show that the noise induces the occurrence of stochastic transitions and bifurcations, and the steady-state probability density function and time history diagrams are given to further explain the existence of these dynamic phenomena. The related research can provide theoretical guidance for the realization of vibration control and reliability design in the four-roller cold rolling mill system.