可行性研究财务评价中利息的计算

介绍了可行性研究财务评价中利息计算的内容和方法。     

Prediction of evaporation heat transfer coefficient and pressure drop of refrigerant mixtures

A study on the prediction of heat transfer coefficient (HTC) and pressure drop of refrigerant mixtures is reported. HTCs and pressure drops of prospective mixtures to replace R12 and R22 are predicted on the same cooling capacity basis. Results indicate that nucleate boiling is suppressed at qualities greater than 20.0% for all mixtures and evaporation becomes the main heat transfer mechanism. For the same capacity, some mixtures containing R32 and R152a show 8.0–10.0% increase in HTCs. Some mixtures with large volatility difference exhibit as much as 55.0% reduction compared with R12 and R22, caused by mass transfer resistance and property degradation due to mixing (32.0%) and reduced mass flow rates (23.0%). Other mixtures with moderate volatility difference exhibit 20.0–30.0% degradation due mainly to reduced mass flow rates. The overall impact of heat transfer degradation, however, is insignificant if major heat transfer resistance exists in the heat transfer fluid side (air system). If the resistance in the heat transfer fluid side is of the same order of magnitude as that on the refrigerant side (water system), considerable reduction in overall HTC of up to 20% is expected. A study of the effect of uncertainties in transport properties on heat transfer shows that transport properties of liquid affect heat transfer more than other properties. Uncertainty of 10.0% in transport properties causes a change of less than 6% in heat transfer prediction.     

挟沙水流中沙粒对底壁湍流猝发的影响

本文在常规的边界层方程中保留了法向压力梯度项和增加了固粒对流体的使用项，结合Ｂａｔｃｈｅｏｌｒ对交界面提供的分析方法和小扰动稳定性理论，由理论分析和计算得到了包括沙粒之类的悬浮体的尺寸，比重，流动Ｒｅ数，两相速度差以及扰动波数与水流底壁湍流猝发角的关系，计算结果与Ｒａｓｈｉｄｉ等的实验结果相符。文中所得结果有助于进一步了解江河底部水流的流动特性以及泥沙的沉积和输运机理。     

A BOUNDARY INTEGRAL EQUATION AND ITS NUMERICAL SOLUTION OF POTENTIAL FLOW AROUND SURFACE-IRREGULA-RITIES

In this paper,using complex functional theory,the authors turn the potentialflow around the surface irregularities in a pressure conduit and semi-infinite platforms intoDirichlet problem.Based on Schwarz formula and by the application of Plemelj's formula,theauthors change the problem into the integration of a Cauchy boundary integral equation in theflow plane through the substitution of variables.Using numerical integration,the authors obtainthe velocity distribution and pressure coefficient along surface irregularities and platforms.Thephysical concept of this method is clear,the convergent speed is rapid and the computative effi-ciency is high.The calculated values agree well with the measured results.It is an effective andsimple method in solving potential flow.     

NUMERICAL SIMULATION OF STRATIFIED FLOW WITH BOTH VERTICAL TEMPERATURE GRADIENT AND VERTICAL SALINITY GRADIENT

Density stratified flow with both the vertical temperature gradient and the verti-cal salinity gradient is simulated numerically, in which turbulent terms are calculated by a sim-plified turbulence stress/flux algebraic model. The feature of stratification and turbulence is de-scribed correctly by the model. The computational results agree well with the experimental data.However, the k-e turbulence model is not so successful.     

基于Ansys的电化学加工辅助阴极设计

根据电化学加工极间间隙电势分布的拉普拉斯方程，提出了一种阴极设计算法－误差调整法。该算法的实现主要采用了Ansys有限元计算软件。计算结果表明：该法计算迭代次数较为适当，对于精度要求不高的电化学加工阴极设计，基于Ansys的辅助阴极设计有效可行。     

�ݼ����߷����������Ϸ�

通过对J.J.Arps方程的推导,提出了油气藏产量递减曲线分析的最佳拟合法。用该法可直接求出递减指数N、初始递减率D1及油气递减前的稳定产量Qi,避免了使用试差法的大量运算过程,大大提高了油气藏工程中指标预测的精度。     

烧结通用配料计算软件系统的开发

本文介绍了烧结通用配料计算软件系统的总体结构，软件的功能及其设计特点，该软件已在多个烧结经验中得到成功应用。     

Two dimensional deformation characteristics of bloom CC with liquid core reduction

A two-dimensional model was applied to simulate the liquid core reduction(LCR) technology of bloom CC using ANSYS software.The deformation characteristics of bloom under different liquid fraction and reducing amount are obtained.The results indicate that the main deformation condition of bloom shell is compressive strain,mainly undertaken by the liquid core,which increases with the enhancement of reducing amount.Solidified shell takes minor deformation.The longitudinal section of bloom appears sunken and the narrow side bulges,which grow serious when the liquid fractionincreases.     

曲率圆弧段代替切线段的数值计算方法

为了确保安全,核工业和其它一些工业要求某些参数的计算值只能取正的相对误差且不大于5×10-3,这是它们对数值计算的基本要求.例如,反应堆带功率运行时,功率增长总是随时间上升,功率曲线是向下凹的.传统的龙格-库塔法计算值总是小于真实值,并且随着时间的增加,计算值越来越小于真实值.按计算值分析,反应堆是安全的,但实际上反应堆是不安全的.这对反应堆的安全极为不利.为此,本文开拓了一个全新的数值计算方法.与龙格-库塔法相比,该方法计算工作量小,与预测一校正法相比,该方法没有启动问题.更值得指出的是计算值高于真实值,这样,反应堆计算结果总是偏于安全的.