层内自生弱酸降压增注技术在文南油田的应用

文南油田是个油层埋藏深、物性差、非均质严重的复杂断块油气田,注水压力大多在35M Pa以上,水井欠注严重,增注实施困难,层内自生弱酸降压增注技术针对长期困扰文南油田的高压、超高压注水问题,研制开发的一种新型复合降压增注技术。该解堵技术不仅可以适合各类油藏,同时可以解除钻井泥浆、粘土矿物等无机垢,沥青质,胶质、石蜡,聚合物胶团等有机物造成的堵塞,并可以起到深部酸化解堵和改善岩石润湿等作用。通过在文南油田高压注水井上应用,取得了好的降压增注效果。     

新一代水管式沉降仪控制模块的研制

新一代低功耗水管式沉降仪控制模块是基于16单片机MSP430F5436为处理器的低功耗装置.该文详细介绍了其硬件结构和工作原理,分别从电源系统、电磁阀控制电路、控制流程、数据采集等部分阐述了其特点,诠释了水管式沉降仪控制模块在人机交互、工作稳定性等多方面所具备的优势.新一代水管式沉降仪控制模块已在实际工程中得到了成功应用,其稳定性和精确性为大坝监控系统提供了准确的实时数据.     

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups with reduced environmental impact

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups was prepared by the copolymerization of 4‐styrenesulfonic acid sodium salts (SSS) with N‐phenylmethacrylamide (copolymer A) or p‐hydroxy‐N‐phenylmethacrylamide (copolymer B), and its properties such as solubility changes, photochemical reaction, and photoresist characteristics were studied. The copolymer containing a relatively higher amount of SSS units was soluble in water. Solubility changes of the copolymers in the various buffer solutions of pH 4 ～ 11 and in water upon irradiation were observed by the measurement of insoluble fraction. The copolymers were soluble in water before irradiation, whereas they became insoluble upon irradiation with the UV light of 254 nm. The photochemical reaction of the copolymer studied by the UV and IR absorption spectroscopies indicated that a photo‐Fries rearrangement was favored for copolymer A, whereas a photocrosslinking reaction was predominate for copolymer B. Resist properties of the copolymers were studied by measurement of the normalized thickness and by development of the micropattern. Negative tone images with a resolution of 1 μm were obtained with these materials that have a sensitivity (D) of ～ 1100 mJ/cm² with an aqueous developing process.© 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1172–1180, 2002     

动车水箱安装座的强度计算和结构改进

为使动车上的水箱安装座具备足够的强度,以保证连接的可靠性,利用三维实体建模并用Hyper Works对水箱安装座进行有限元计算;依据EN 12663:2010标准对水箱安装座进行强度校核并针对不满足强度要求的部分进行结构改进.结果表明:改进后的模型设计能够满足EN 12663:2010的标准;CAE软件的应用为水箱安装座的结构设计提供参考.     

利用A/O技术处理己内酰胺生产废水的研究

探讨采用先进的A/O(厌氧菌 /好氧菌 )生物脱氮技术对己内酰胺生产废水进行处理的工作机理和工艺设计方法 ,分析了温度、溶解氧、pH值、进水碳氮比等参数对生物脱氮工艺过程的影响 ,并对其关键技术进行了研究     

硅整流元件纯水冷却系统换热设备的化学清洗

介绍了硅整流元件的纯水冷却系统换热设备化学清洗中药剂的评定筛选原则。质量标准，清洗工艺等。并对其清洗效果加以评定。     

水性聚氨酯的合成及其改性的研究

研究了 n NCO/n OH、扩链剂 ( BD)及二羟甲基丙酸 ( DMPA)的含量对水性聚氨酯合成及涂膜性能的影响 ,确定了较佳的配方。并利用甲基丙烯酸酯类单体合成聚氨酯 -丙烯酸酯共聚复合乳液来改善水性聚氨酯的性能     

工艺参数对陶瓷注射成型的影响与分析

本研究通过改变注射温度，注射压力，保压压力等几个主要参数，对形状，体积不同的注射成型体，试条，圆柱及子部件进行了一系列注射工艺实验。相应地对成型体的密度，弯曲强度及烧结体的密度和强度进行测量，并从陶瓷注射成型混合物的流动行为，热物理特性方面对注射这一复杂过程进行分析，探讨工艺参数对成型过程的内在影响，从而确定合理的注射工艺条件。     

电镀工艺的水质控制

阐述电镀配液用水和清洗用水的水质要求和控制指标。     

Effect of irrigation and nitrogen fertilizer on yield,oil content,nitrogen accumulation and water use of canola (Brassica napus L.)

Effects of N application and water supply on yield, oil content and N accumulation by canola, cultivar Marnoo, grown on a heavy clay soil in the Goulburn Murray Irrigation Region were investigated. Treatments were rainfed (R_f) or watered at a deficit of 50 mm (40–60 mm, I₅₀) beginning in the spring. N treatments were 0, 50, 100 or 200 kg N ha^–1 at sowing or as split applications of 20/80, and 50/50 kg N ha^–1 at sowing and rosette, respectively.Yield (Y_g) ranged from 170 to 520 g m^–2. Irrigation and N increased yield in both years. Grain yields were increased by N application on the irrigated treatments when 100 or 200 kg N ha^–1 was applied. Oil concentrations ranged from a maximum of 46.4% in treatment N₀ to a minimum of 40.6% in treatment N₂₀₀ and was inversely related to seed N concentration. Although fertilizer N decreased oil concentration, it increased the yield of oil.Nitrogen accumulation (N_b) limited yield of all treatments and was described by the equation, Y_g = 806[1-EXP(–0.039*N_b)]. This implied a decrease in yield per unit of N_b at the higher rates of fertilizer addition with consequent increases in grain N concentration.The efficiency of water use in the production of grain (WUE_g) and biomass (WUE_b) were 7.5 and 23 kg ha^–1 mm^–1 respectively. Nitrogen additions increased WUE_g and WUE_b in both seasons. Maximum values of 8.9 (WUE_g 1986) and 26.8 (WUE_b 1987) were measured from treatment N₂₀₀. These data suggest that the crops made efficient use of the applied water.