The effect of water on the tensile yield of polystyrene

When PS is tested in tension but immersed in water the yield stress is unchanged and the crazing stress is increased, as compared with tests conducted in air. The crazing pattern is otherwise unchanged. If the PS is first equilibrated with water and then tested under water, both crazing stress and yield stress are reduced. A very large number of small crazes are generated which result in a 23% increase in the fracture strain.     

耐水性木材用脲醛粘合剂的研究

研究了改进胶合板用脲醛粘合剂的耐水性的方法。针对脲醛粘合剂耐水性低的原因,提出在胶液中添加碱性物质——耐水添加剂,可显著改善胶合板的耐水性,几种添加剂并用,胶合板可达一级耐水板的水平。     

低粘度高固含量醋酸乙烯-丙烯酸酯共聚乳液胶粘剂的研制

介绍了一种低粘度、高固体含量的醋酸乙烯-丙烯酸丁酯-丙烯酸异辛酯共聚乳液胶粘剂的合成工艺及性能。该乳液粘度低于2500mPa.s,固体含量≥52%,较低的玻璃化温度和良好的耐水性能,应用于卷烟和防水涂料的生产。     

基于商业智能的小区日用水量预测模型研究

商业智能现在已广泛应用于各个领域,利用商业智能可以对趋势预测做出良好的支持,本文将其中一种常用商业智能的工具——数据仓库技术,应用于小区家庭的用水量预测研究。     

AutoCAD在建筑给排水系统图设计中的应用技巧

本文结合建筑给水系统图的特点,从绘制图例、确定主体管线、添加注释等方面介绍了运用AutoCAD软件进行建筑给排水系统设计图绘制的方法、技巧。     

Numerical Simulation of Oil‐water Hydrocyclone Using Reynolds‐Stress Model for Eulerian Multiphase Flows

A three‐dimensional oil‐water turbulent flow and oil separation process in a double‐cone liquid‐liquid hydrocyclone (LLHC) is numerically simulated using FLUENT software. The Euler‐Euler approach and Reynolds‐stress model are combined and adopted in this simulation to handle the challenging situation of anisotropic turbulent two‐phase flow with a higher volumetric ratio (over 10%) in the dispersed phase. It is visualized well in the simulation how separation, aggregation and shift of oil and water proceed in the LLHC. The oil separation efficiency is determined based on flow field and phase concentration distribution. The simulation is verified by comparing predicted and measured separation efficiency in the LLHC.     

Modelling water flow,nitrogen transport and root uptake including physical non-equilibrium and optimization of the root water potential

A model is presented for the simulation of water flow, heat flow, and nitrate and ammonium transport. Two approaches are used for modelling plant water uptake as well as for plant nitrogen uptake. Nitrogen transformations are accounted for in a very simple way. This paper focuses mainly on water flow modelling, solute transport, and water uptake. Richards' equation is used to model water flow in layered soil profiles with a great variety of boundary conditions. Solute transport is simulated with either a simple convection dispersion equation or with a two-region physical non-equilibrium model to distinguish between mobile and immobile water and solute exchange between these two regions. A macroscopic sink term is added to Richards' equation to account for plant water uptake. This term can be calculated along two different approaches, one of which is based on the concept of root water potential. The root water potential is then continuously optimized to minimize the difference between the climatic demand and the uptake rate.Simulation results are compared with field data from the Netherlands to illustrate the degree to which the model is able to predict water flow, solute transport and plant water uptake. The root water potential optimization model seems to provide the best prediction of water distribution. In particular the shape of the profile, revealing uptake patterns, is quite well reproduced with this model. Comparison of simulated and observed water content profiles seems also to reveal the presence of preferential pathways. The comparisons show also how predicted solute distributions can be improved by using a two-region approach rather than a simple convection-dispersion model.     

Adhesive bonding of stainless steel water tubing

The use of an adhesive to bond stainless steel water tubing, allowing stainless steel fittings to be employed, is considered and compared with the more conventional use of compression or capillary copper fittings together with a soft solder. Tests carried out to determine environmental effects on adhesively bonded stainless steel tubing suitable for domestic water supply, and the strengths of these joints, are described. It has been found that acrylic anaerobic adhesives are suitable for bonding tubing carrying cold water, the joints attaining superior strength to the copper-soldered ones; a reasonable degree of flexing can also be tolerated. It would appear that certain selected adhesives may also be used in joints carrying hot water.     

新型气化炉煤气洗涤废水生物脱氮的研究

在实验室,采用SBR生化反应器,分别研究了经空气吹脱预处理和未经预处理的新型气化炉煤气洗涤废水经驯化建立的生态系统脱除氨态氮和COD以及脱氮模式的区别,得出以下结论:新型气化炉煤气洗涤废水可采用短程亚硝化型硝化形式直接进行生化处理。     

Solubility of Na2SO4, Na2CO3 and their mixture in supercritical water

The solubility of many salts in water decreases dramatically with temperature in the vicinity of the critical point of pure water. Examples of these salts are sulfates of sodium, potassium, lithium and sodium carbonate. These salts are usually produced during supercritical water oxidation (SCWO) and contribute to fouling. The solubility of Na₂CO₃ and Na₂SO₄ has been determined in pure form and in the presence of each other, for the temperature range relevant to SCWO. The experimental procedure was to pass the salt solution through a tube at constant temperature. After a brief initiation period during which no salt sticks to the tube, the salt above the solubility limit deposited on the tube surface. The solution leaving the section was thus at the solubility limit. A rapid decrease in the salt solubility was observed just above the pseudo-critical temperature. For supercritical conditions, the solubility of each salt in the form of a mixture was quite close to the solubility of pure salt. At the highest fluid density considered (480 kg/m³) the presence of Na₂CO₃ reduces the solubility of Na₂SO₄, as might be expected from the “common-ion effect”.