修井作业中的自动起下管柱系统探讨

目前在油田修井作业中起下管柱的人工作业量大、工作效率低、危险性大、工作条件差。提出了一种自动起下管柱作业系统,主要包括通井机、井架、液压钳、筒式吊卡、卡瓦支座、立式排管架和控制系统等,支座卡瓦为弹性体微条嵌入式结构,筒式吊卡能自动卡入和松开管柱接箍,排管架可实现管柱的立式排放,控制系统协调各部分的工作。该系统构思新颖,结构简单,技术可行,并能够与现有修井设备配合使用,实现油田修井作业的自动化。     

国外大型调水工程渠道运行控制综述

与常规的以经验为主的运行方式相比，考虑了水动力学影响、以多渠池串联的整个渠道系统为研究对象的渠道运行控制在增加调水工程的安全性、降低运行成本、提高输水效率等方面能取得更佳的效果。国外关于调水工程渠道控制的研究起步较早，基于非线性偏微分圣维南方程组发展了多种离散化、线性化等简化方法，建立了相应的控制模型，并从不同角度确定了其控制方法以及控制算法。参考已有的研究思路和方法，总结国外渠道运行控制的成果，对我国南水北调工程的运行控制有着重要的借鉴意义。     

碘量法测铜中物质性质和分析操作

本文讨论了碘量法测定铜量中一些有关物质的特性,以及这些性质对分析条件和操作的要求。     

推拉式浅槽盐酸酸洗工艺的操作经验

介绍了带钢推拉式浅槽紊流盐酸酸洗各工序的操作经验,并提出了建议。     

三维精细积分法地震正演及边界条件

 将任意差分精细积分法用于三维波动方程地震正演，关键在于如何消除数值计算中有限波场区域边界引起的边界反射。文中采用Berenger给出的电磁波完全匹配层吸收边界条件，推导出三维波动方程任意差分精细积分法地震正演的完全匹配层吸收边界条件计算公式，并给出了完全匹配层吸收边界条件算例。计算结果表明，此方法压制边界反射效果明显。三维波动方程地震正演模拟实例表明，完全匹配层吸收边界条件的任意差分精细积分法为复杂区地震波传播规律研究提供了一种实用的正演模拟工具     

莱钢职业安全健康动态监控信息系统的建立及运行分析

以网络技术和信息技术为依托，建立职业安全健康动态监控信息系统，进行职业安全健康管理的监控和预警，提高安全管理的现代化水平。     

Effect of pH on the Crystallization of Homogeneously Precipitated Nanosized PZT Powder

Nanosized lead zirconate titanate (PZT) powder with Zr:Ti ratio in the morphotropic phase boundary region was synthesized by homogeneous precipitation of metal ions. The powder precipitated at 90°C and at pH 6.7 resulted single-phase perovskite lead zirconate titanate powder when calcined at 550°C and above for 4 hours in air. The solution pH and the precipitation temperature strongly affect the composition of the calcined powder. The results obtained by structural characterization of homogeneously precipitated powder were compared with that obtained from the conventional precipitation method using ammonia in terms of crystallization, homogeneity, and microstructure. The homogeneously precipitated powder showed smaller particle size, minimum agglomeration and uniform shape on calcination and annealing. Powdered samples that precipitated by homogeneous precipitation crystallized directly to perovskite PZT, without any intermediate pyrochlore phase formation. In contrast, the NH₃ precipitated powder converted to perovskite PZT via metastable pyrochlore and it showed phase segregation upon annealing at higher temperatures. The reaction kinetics has been studied by X-ray diffraction, differential thermal analysis, and differential scanning calorimetry.     

Flow Control Through the Use of Topography

In this work, optimal shaft shapes for flow in the annular space between a rotating shaft with axially-periodic radius and a fixed coaxial outer circular cylinder, are investigated. Axisymmetric steady flows in this geometry are determined by solving the full Navier-Stokes equations in the actual domain. A measure of the flow field, a weighted convex combination of the volume averaged square of the L₂-norm of the velocity and vorticity vectors, is employed. It has been demonstrated that boundary shape can be used to influence the characteristics of the flow field, such as its velocity component distribution, kinetic energy, or even vorticity. This ability to influence flow fields through boundary shape may be employed to improve microfluidic mixing or, possibly, to minimize shear in biological applications.     

Symmetric BEM formulations for 2-D steady-state and transit potential problems

This paper presents a new concept for symmetric boundary element method (SBEM) applicable to 2-D steady-state and transit potential problems. Two kinds of SBEM formulations are derived. Symmetry is obtained simply through matrix manipulation, and no hypersingularity appears. Therefore, SBEM is much easier than the traditional symmetric Galerkin BEM. Compared with the traditional asymmetric BEM, the present SBEM can reduce the computational cost for time domain problems only. However, when applied to BEM/FEM coupling procedure, SBEM can reduce the computational cost for both steady-state and time domain problems. Three numerical examples are included to illustrate the effectiveness and accuracy of the present formulations.     

一些两段式煤气发生炉运行情况分析

两段式发生炉具有产生煤气热值较高，生产能力较大，稳定性较好等优点，目前在一些大中型企业运行良好。本文总结了一些两段炉操作运行情况，也指出了存在的一些问题，诸如煤气脱硫处理不当、停炉停产检修需调整以及应用计算机自动控制方面等问题有待于解决，最后提出一些建议。