Understanding and Modeling the Effect of Surfactants in Enhanced Particle Removal from Surfaces in Aqueous Media

The removal of particulate contamination is a critical issue for many manufacturing processes. It is particularly critical to the electronics industry in which small pieces of microscopic debris remaining after chemical mechanical planarization (cmp) using submicron polishing particles can cause device failure. One way to enhance particle removal following the cmp process is to utilize surfactants. Recent research has shown ways to model the effect of surfactants on enhanced particle removal. However, previous research has not demonstrated the effect of ionic strength on enhanced particle removal associated with surfactant use. Past research has also not shown the combined effects of ionic strength and surfactant concentration on enhanced particle removal using surfactants. This article summarizes the parameters affecting particle removal, and it provides data and analysis on the effect of ionic strength as well as the combined effects of ionic strength and surfactant concentration on particle removal following cmp processing.     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

安徽省长江干堤的几种加固措施

安徽省境内765km的长江干堤，由于均是在原来旧堤的基础上经逐年加高培厚的，修筑时均未按设计要求施工，致使堤身密实度不够，新老堤土之间结合不牢，在汛期高水位时易产生渗漏。20世纪70年代以来，安徽省高度重视对长江干堤渗漏隐患的处理，经过长期的实践，逐渐摸索出一套行之有效的除险加固方法，如锥探灌浆、灭杀白蚁、冲抓套吉、垂直铺塑防渗、粘土铺盖及压渗盖重等处理措施。使长江干堤的渗漏隐患得以基本消除，其具体作法可供类似工程借鉴。     

中原油田水平井钻井液技术

根据中原油田地层高温、高盐、易塌、易漏失及水平井的特点,优选了适用于水平井的强抑制强封堵聚合物钻井液体系,并进行了现场应用.室内实验结果表明,优选的强抑制强封堵聚合物钻井液具有良好的井眼净化、摩阻控制、井壁稳定及油层保护等性能.现场应用时能满足钻井、录井、测井的需要,钻井施工顺利,取得了良好的经济和社会效益.     

浮体门设计的探索与实践

水电站泄水道破坏修复工程,是一项风险高、难度大、前景广阔的系统工程。刘家峡水电站泄水道2号孔破坏修复的关键,是采用人工深水软导向浮体闸门封堵孔口,形成门后洞内旱地施工条件;龚嘴水电站10号冲砂底孔破坏修复的关键,增设浮体闸门采用自动潜行式浮体闸门封堵孔口,形成门后洞内旱地施工条件;哈萨克斯坦CHARDARA水电站SYNAS项目泄水底孔修复的关键,采用分次降水安装浮体闸门侧支承的方法,挡住引水发电机组的下游尾水,在泄水道进口检修门和流道出口之间形成门旱地施工。此3项泄水道修复工程在行业内没有先例,难度很大。整体方案具有创新性,并且均已高质量竣工并投入正常运行。     

孤后八气田机械堵水技术与应用

在多层合试合采工艺实施过程中，经常会遇到地层水的问题，通常采用的挤水泥或化学堵剂的办法不仅成本高且工艺复杂，而使用常规封隔器又达不到封堵效果。Y445(3)型封隔器 Y341(Ⅱ)型封隔器的悬挂式封隔组合管柱堵水工艺，满足了封堵水层、采气的要求。     

建(构)筑物机械拆除方法综述

介绍了几种常用的建(构)筑物机械拆除方法,对其工作原理、特点、应用条件及局限性加以分析和说明。     

矿用立式旋风水膜除尘器除尘性能的试验研究

本文通过对立式旋风水膜除尘器除尘性能的模型试验,揭示了几个主要参数对其除尘性能的影响,确定了合理的取值范围,对该种除尘器的设计和应用提供了依据。     

Natural zeolite utilisation in pollution control: A review of applications to metals' effluents

This paper assesses the potential of natural zeolite utilization as a low-cost ion-exchange and sorbent material in pollution control and recovery of metals. The improvement of the purity of natural zeolites coupled with their chemical modification capabilities in order to provide specific properties may provide a cost-effective alternative for the treatment of heavy metal contaminated soil and water. The application of natural zeolites in industrial pollution control is becoming important and the level of technical effort is increasingly expanding. The extent of application is unlikely to be related solely to their low cost, but also to improved properties and performance characteristics, which will advance the practical implementation of natural zeolites' technology.     

脱苯工艺的节能改造

焦化厂富油脱苯工艺中，管式炉法较蒸汽法节能。本溪钢铁公司焦化厂产焦１８０万ｔ／ａ的装置，其富油脱苯工艺由蒸汽法改为管式炉法后，每年可节煤７０００ｔ。