Modified oil agglomeration process for coal beneficiation. III. Grinding and agglomeration using different szego mill designs

The simultaneous grinding/agglormeration process has been used to beneficiate Minto coal. Experiments with the Szego Mill, a planetary ring-roller mill with grooved rollers, have given good results. Different roller ridge/groove sizes have been tested and favourable oil-coal-water ratios established. Ash removal is closely related to grinding performance. Very short mill residence times, of the order of 10 seconds, are sufficient for microagglomerate formation. Considerable equipment and operating cost savings are possible with the modified process.     

HYQ-965-Ⅲ解堵剂的研制及现场应用

针对涠洲11-4油田W11-4D-A1井返吐油基泥浆堵塞油管问题,以渗透剂、乳化剂、分散剂、互溶剂为原料,制备了HYQ-965-Ⅲ解堵剂.考察了不同配方解堵剂中原料间的配伍性和溶垢效果,研究了最佳配方:渗透剂Ⅰ20%、乳化剂Ⅰ10%、分散剂10%、互溶剂10%、海水50%.将该解堵剂在W11-4D-A1井进行应用,从现场使用情况看,HYQ-965-Ⅲ对油基泥浆、原油具有很好的分散能力,成功解除了油管堵塞,达到预期设计要求.     

砂岩油藏注水井深部酸化技术

吐哈油田长期注水开发后,注入水外源性伤害和地层内源性伤害不断在地层深部累积,采用常规酸化措施效果不理想。为此,通过长岩心污染模拟实验,研究了深部污染的污染特征及酸化解堵机理,通过解堵液缓速和工艺过程的综合应用实现深部解堵。应用AcidGuide专家系统对单井进行全面的污染诊断分析,并进行了参数优化设计,形成了适应吐哈油田深部酸化解堵的技术体系,现场应用取得良好效果,为类似低渗透油藏水井增注措施提供参考。     

陕北富县探区天然气藏钻井液屏蔽暂堵技术

陕北富县探区上古生界储层属低孔、低渗的致密储层,下古生界主要储集空间为溶蚀孔洞和裂缝,孔洞多为1～3 mm的小孔,裂缝宽度为0.2～7.0 mm,油气主要聚集在裂缝中.优选出了由复合暂堵剂CXD、憎水性屏蔽剂DYC和表面活性剂ABA组成的屏蔽暂堵配方,其中CXD具有架桥作用并对裂缝性储层有独特暂堵效果,DYC有浊点效应、能在井壁上快速形成阻止滤液侵入的油膜,ABA能减少水锁损害.加入暂堵剂后的钻井完井液,抑制性增强,页岩回收率在90%以上;高温高压滤失量降低,滤饼薄而韧、光滑;岩心静态渗透率恢复值大于90%;滤饼摩阻系数降低.富古6井通过使用该完井液,堵塞比和表皮系数都在轻微污染范围内,井径扩大率比其它井有不同程度的降低,表明优选出的屏蔽暂堵钻井完井液,能很好地保护陕北探区天然气藏.     

撬装式油井热洗装置研制及应用效果评价

油井热洗是油田最常用的一种清蜡方法。靖安长6油藏是采油三厂的主力油藏,截至2004年底建成油井1064口,由于长6层原油含蜡量高,油井结蜡严重,通常采用常规热洗方法进行油井清蜡。存在以下两方面问题：一是常规油井热洗方法操作比较复杂,运行动力设施多,热洗费用较高；二是常规洗井油源均来自联合站或接转站,为不同层所采的混合原油,进入地层后,会对地层造成一定程度的伤害。为此,我们认真分析了现有油井热洗工艺的不足,查找了油井热洗费用高的影响因素,结合靖安油田长6油藏丰富的伴生气资源,自主研发了撬装式油井热洗装置,经过现场应用取得了较好的效果。     

Motion compensated film restoration

Motion picture films are susceptible to local degradations such as dust spots. Other deteriorations are global such as intensity and spatial jitter. It is obvious that motion needs to be compensated for before the detection/correction of such local and dynamic defects. Therefore, we propose a hierarchical motion estimation method ideally suited for high resolution film sequences. This recursive block-based motion estimator relies on an adaptive search strategy and Radon projections to improve processing speed. The localization of dust particles then becomes straightforward. Thus, it is achieved by simple inter-frame differences between the current image and motion compensated successive and preceding frames. However, the detection of spatial and intensity jitter requires a specific process taking advantage of the high temporal correlation in the image sequence. In this paper, we present our motion compensation-based algorithms for removing dust spots, spatial and intensity jitter in degraded motion pictures. Experimental results are presented showing the usefulness of our motion estimator for film restoration at reasonable computational costs. Received: 9 July 2000 / Accepted: 13 January 2002 Correspondence to:S. Boukir     

Laboratory simulated slipstream testing of novel sulfur removal processes for gasification application

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is investigating an Early Entrance Coproduction Plant (EECP) concept to evaluate integrated electrical power generation and methanol production from coal and other carbonaceous feedstocks. Research, development and testing (RD&T) that is currently being conducted under the project is evaluating cost effective process systems for removing contaminants, particularly sulfur species, from the generated gas which contains mainly synthesis gas (syngas), CO₂ and steam at concentrations acceptable for the methanol synthesis catalyst. The RD&T includes laboratory testing followed by bench-scale and field testing at the SG Solutions Gasification Plant located in West Terre Haute, Indiana. Actual synthesis gas produced by the plant was utilized at system pressure and temperature for bench-scale field testing.     

Study on Reduction of Sulfur Content in FCC Gasoline

Reduction of sulfur content in FCC gasoline was studied in a fixed fluid bed (FFB) unit by using metal-modified LV-23 FCC catalyst. The results showed that the sulfur content in FCC gasoline could be reduced with LV-23 catalyst modified with zinc, palladium, zinc-palladium, zinc-cobalt, and zinc-nickel. Among these metals or metal combinations, palladium-containing catalyst was the most effective. Desulfufization of the heavy fraction of FCC gasoline was more effective than full-range gasoline under the same conditions with palladium-containing catalysts. A high reaction temperature was favorable to desulfurization, but it would reduce the yield of liquid product. After desulfurization reaction, the olefm content of product gasoline decreased while the aromatic and iso-alkane contents increased. Removal of thiophene and benzothiophene is higher.     

An integrated biodesulfurization process,including inoculum preparation,desulfurization and sulfate removal in a single step,for removing sulfur from oils

BACKGROUND: A single‐stage reactor, in which the growth of bacterial culture, induction of desulfurizing enzymes, and desulfurization reaction are carried out in a single step, was adopted to investigate desulfurization of dibenzothiophene (DBT) at high cell densities. Rhodococcus erythropolis, IGTS8 was used as the biocatalyst. Optimal conditions for bacterial growth and DBT desulfurization were investigated. RESULTS: Optimization of fermentation conditions was necessary to obtain high cell densities including controlling accumulation of acetate. Under optimal operating conditions, the maximum optical density at 600 nm (OD₆₀₀) was measured to be 26.6 at 118 h of cultivation. When biodesulfurization of DBT in model oil with a high cell density culture of IGTS8 was investigated, accumulation of sulfate was found to limit the extent of desulfurization. A sulfate removal step was added to obtain a single‐stage integrated biodesulfurization process. Sulfate removal was achieved via an aqueous bleed stream and use of a separation unit to recycle the organic phase. CONCLUSION: A proof of principle of a complete system capable of biocatalyst growth, induction, desulfurization and by‐product separation was demonstrated. This system enables simplification of the biodesulfurization process and has potential to lower the operating cost of the bioprocess. Copyright © 2008 Society of Chemical Industry     

中原油田气井堵水工艺技术探讨

针对中原油田气田的开发现状,为寻求更加经济、有效的治水措施,通过对国内外气田开发状况的调研,对找水技术和堵水技术进行了归纳,在此基础上研究出适合于中原油田气井堵水的GWPA堵剂系列,现场应用效果较好。