三箱式纺丝技术生产PET/PA6复合纤维

介绍了采用三箱式纺丝技术生产PET/PA6复合纤维的设备及工艺。重点对纺丝箱体、纺丝温度控制进行了详细的讨论。     

高分子金属配合物发光材料的制备技术进展

高分子金属配合物发光材料是一类很有价值的功能材料,评述了有关它的各种合成方法。以金属离子与含配位基团的聚合物进行反应,容易在高聚物之间形成交联,难以获得发光强度高的高分子配合物;使金属离子与高分子配体和小分子配体同时作用,可以得到荧光强度比较理想的产物,但反应难以定量控制;以小分子金属配合物单体与某些单体之间进行共聚合反应,也可获得荧光强度较高的高分子配合物,但聚合反应的空间位阻较大;通过两端都含有配位基团的刚性链的有机小分子配体直接与金属离子配合形成高分子金属配合物;以小分子金属配合物单体进行均聚或者将小分子金属配合物接枝到高聚物上也可以形成高分子金属配合物。     

Production of nanoparticles of copper compounds by anodic dissolution of copper in organic solvents

The anodic behaviour of copper was investigated in ethanol solution containing LiClO₄, LiCl electrolyte and water. The type of electrolyte and the water content influences the mechanism of the anodic process and the formation of anodic products. In LiClO₄ electrolyte the dissolution of copper is related to the oxidation of Cu(I) to Cu(II). In solutions of LiCl the etching of copper begins with the creation of soluble complexes of Cu(I) with chloride ions and solvent molecules. At potentials above 0.4 V the formation of alkoxides was observed in both solutions, characterized by a yellow tint. On the other hand, above 0.8 V (i.e. above the equilibrium potential of alcohol oxidation) copper dissolution is accompanied by the formation of a blue colloidal suspension of Cu (II) copper salt. Anodic etching of copper in solutions containing 3% H₂O at potentials higher than 0.4 V leads to the formation of colloidal suspension of copper oxide nanoparticles.     

导电高分子PEDOT／PSS保护银纳米颗粒的制备与表征

利用导电高分子聚（3，4-二氧乙基噻吩）／聚（对苯乙烯磺酸）（PEDOT／PSS）作保护剂，制备了银纳米颗粒，用UV-Vis和TEM对其进行了表征．结果表明，选择合适量的PEDOT／PSS保护剂可以得到大小分布较窄银纳米颗粒．     

化学气相沉积(CVD)炭/碳复合材料(C/C)研究现状

主要介绍了炭／炭复合材料（C／C）的化学气相沉积（CVD0制备方法及其影响因素，以及热解炭的组织与沉积机理。概括了VCD的基本方法，如等温法、压差法、热梯度法等。分析了温度、气流速率、气体浓度、预制体及孔隙的形状大小状况等对CVD过程的影响。列举了热解炭的组织，包括光滑层、粗糙层、各向同性体碳以及它们的变体，并对其生长特征及性能进行了较详细的描述。综述了热解炭的沉积机理，典型的有分子沉积、固态沉积、液滴沉积机理等。     

Oxidative flavour deterioration of fish oil enriched milk

The oxidative deterioration of milk emulsions supplemented with 1.5 wt‐% fish oil was investigated by sensory evaluation and by determining the peroxide value and volatile oxidation products after cold storage. Two types of milk emulsions were produced, one with a highly unsaturated tuna oil (38 wt‐% of n‐3 fatty acids) and one with cod liver oil (26 wt‐% of n‐3 fatty acids). The effect of added calcium disodium ethylenediaminetetraacetate (EDTA) on oxidation was also investigated. Emulsions based on cod liver oil with a slightly elevated peroxide value (1.5 meq/kg) oxidised significantly faster than the tuna oil emulsions, having a lower initial peroxide value (0.1 meq/kg). In the tuna oil emulsions the fishy off‐flavour could not be detected throughout the storage period. Addition of 5—50 ppm EDTA significantly reduced the development of volatile oxidation products in the cod liver oil emulsions, indicating that metal chelation with EDTA could inhibit the decomposition of lipid hydroperoxides in these emulsions. This study showed that an oxidatively stable milk emulsion containing highly polyunsaturated tuna fish oil could be prepared without significant fishy off‐flavour development upon storage, provided that the initial peroxide value was sufficiently low.     

SO2-4/La2O3-ZrO2催化合成亚油酸乙酯

将SO2-4/ZrO2负载镧制备了新型催化剂SO2-4/La2O3-ZrO2,以亚油酸和乙醇的酯化反应为探针,考察了不同制备条件对催化剂性能的影响,结果表明,La3+浸渍浓度为0.07 mol/L,经110℃烘干后于500℃焙烧3 h所得催化剂活性最好.采用正交实验法对影响酯化反应的因素进行考察,最佳实验条件为n(醇):n(酸)= 6:1,反应时间6 h,催化剂用量3%(亚油酸),酯化率可达93.7%.且该催化剂具有良好的重复使用和再生能力.     

Electrosyntheses and characterization of poly(5‐bromoindole) in boron trifluoride diethyl etherate

Poly(5‐bromoindole) (PBrI) films were synthesized electrochemically by direct oxidation of 5‐bromoindole in pure boron trifluoride diethyl etherate. The oxidation potential of 5‐bromoindole in this medium was measured to be only 0.97 V vs. saturated calomel electrode, which was lower than that determined in acetonitrile + 0.1 mol L^?1 Bu₄NBF₄ (1.08 V). PBrI films obtained from this medium showed good electrochemical behavior and good thermal stability. Structural studies showed that the polymerization of 5‐bromoindole ring occurred at 2,3 position. As‐formed PBrI films were thoroughly soluble in strong polar solvent dimethylsulfoxide and partly soluble in tetrahydrofuran. Fluorescent spectral studies indicated that PBrI was a good blue‐light emitter. The excitation and emission spectra of PBrI showed a significant shift to longer wavelength compared with that of the monomer, consistent with the greater extent of electron delocalization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 539–547, 2006     

线性多智能体系统一致性问题的部分稳定性方法（英文）

A linear transformation is proposed to deal with the consensus problem of high-order linear multi-agent systems(LMASs).In virtue of the linear transformation, the consensus problem is equivalently translated into a partial stability problem. We discuss three issues of the LMASs under a generalized linear protocol: 1) to find criteria of consensus convergence; 2) to calculate consensus function; 3) to design gain matrices in the linear consensus protocol. Precisely, we provide a necessary and sufficient criterion of consensus convergence in terms of Hurwitz stability of a matrix and give an analytical expression of the consensus function. In addition, we set up a relation between the gain matrices in the protocol and the convergence time and consensus accuracy of the agents, and then design the gain matrices with respect to a pre-specified convergence time and a required consensus accuracy.     

Single-phase gold/palladium catalyst: The nature of synergistic effect

The liquid phase oxidation of glycerol with oxygen has been studied using mono and bimetallic catalysts based on Au and Pd metals supported on activated carbon, in order to study the effect of the metal on the distribution of the products and on activity of catalysts. It was found that by using bimetallic catalysts (Au–Pd) a strong synergistic effect was shown. By using a preformed nucleating centre we were able to obtain a single alloyed phase, which allowed us to address the synergistic effect to the presence of alloyed Au/Pd. The advantage of using this latter catalyst lies not only in the high activity but also in a prolonged catalyst life. Although a partial leaching of palladium and assembling of the particles have been revealed by ICP and HRTEM respectively, activity after 10 re-cycles decreased less than expected (about 10%).