Assessing the predictive capability of two‐phase models for the mechanical behavior of alumina/epoxy nanocomposites

A review of analytical modeling of particulate reinforcement is made as a prelude to the problem of microstructural inhomogeneity in nanocomposite materials. Noting the inevitability of dispersion nonuniformity, and variations in agglomerate morphology and filler‐matrix interaction, the need to question the application of such models to novel materials arises. Employing the mechanical properties of alumina/epoxy nanocomposites, with known dispersion characteristics, an evaluation of the predictive capability of various models for Young's modulus, strength, and failure strain is made. Comparison between models is accompanied by a discussion of the parameters used in the fitting of macroscopic behavior to microstructural features. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 869–879, 2005     

Critical evaluation of coupling particle size distribution with the shrinking core model

The shrinking core model (SCM) is widely used to model fluid-solid reactions such as the leaching of metals from minerals. In most cases, however, the particle size distribution (PSD) of the solid material was disregarded. In this paper the erroneous shift in the control regime when neglecting PSD was quantified and the dependence of the shift on the coefficients of variation (CV) and the type of PSD was analysed. By coupling the SCM with a Gamma PSD, it was found that neglecting the PSD would shift the control regime from chemical reaction to inert/ash layer diffusion, when the CV was between 0.7 and 1.2. For a system controlled by liquid film diffusion, neglect of the PSD, would shift the control regime to chemical reaction when CV is between 0.3 and 0.7 or to inert/ash layer diffusion when CV is greater (0.9-1.5). It was therefore postulated that some researchers had unknowingly made invalid conclusions about the control regime due to the neglect of PSD. However, an inert/ash layer diffusion-controlled process was insensitive to the neglect of PSD. When CV<0.3, neglect of the PSD would not cause any erroneous shifts, irrespective of the control regime. Experimental data confirmed the observation. For a given CV, the deviation in the fraction reacted from the mono-PSD increases with CV and decreases with time. The maximum deviation, which occurs at the beginning, is about 10% with a gamma PSD of CV=0.3. The percent deviation is dependent of the type of PSDs. Gamma PSD gives the lowest deviation while Gaudin-Schuhmann results in the largest deviation (maxi. ∼19%, with CV=0.3) in the first half of dissolution process. Log-normal distribution gives a larger deviation than gamma but quickly approaches the latter with time. The deviation for Rosin-Rammler is between log-normal and Gaudin-Schuhmann. For systems with CV less than 0.3, the SCM can be fairly used without considering PSD. When CV is greater than 0.3, particularly in the early stage of a dissolution process with a PSD other than gamma, PSD should be included to avoid substantial errors.     

Flow regime, hydrodynamics, floc size distribution and sludge properties in activated sludge bubble column, air-lift and aerated stirred reactors

This paper presents a comparative study how reactor configuration, sludge loading and air flowrate affect flow regimes, hydrodynamics, floc size distribution and sludge solids-liquid separation properties. Three reactor configurations were studied in bench scale activated sludge bubble column reactor (BCR), air-lift reactor (ALR) and aerated stirred reactor (ASR). The ASR demonstrated the highest capacity of gas holdup and resistance, and homogeneity in flow regimes and shearing forces, resulting in producing large numbers of small and compact flocs. The fluid dynamics in the ALR created regularly directed recirculation forces to enhance the gas holdup and sludge flocculation. The BCR distributed a high turbulent flow regime and non-homogeneity in gas holdup and mixing, and generated large numbers of larger and looser flocs. The sludge size distributions, compressibility and settleability were significantly influenced by the reactor configurations associated with the flow regimes and hydrodynamics.     

棉籽油间歇式酯交换反应动力学的研究

生物柴油(棉籽油甲酯)可以由棉籽油与甲醇在催化剂KOH存在下通过酯交换反应制得。故对棉籽油间歇式酯交换反应动力学进行了研究,并考察了反应温度和催化剂浓度对产物棉籽油甲酯浓度的影响。用液相色谱法分析棉籽油的组成;用气相色谱法分析产物中棉籽油甲酯的含量。由实验数据绘制的动力学曲线得到酯交换反应在开始阶段为准二级反应,以后紧接转为一级反应和零级反应,与文献报导的棕榈油酯交换反应动力学结果一致。由实验数据求出酯交换反应在开始阶段的动力学参数,35℃、45℃时的反应速率常数分别为0.9179Lmol-1min-1和1.049Lmol-1min-1,酯交换反应的活化能为10.88kJmol-1。根据实验结果得到棉籽油酯交换反应的最佳反应温度为45℃,最佳催化剂为1.1%KOH。     

压缩机废油回收工艺小结

介绍了压缩机废油回收的原理、工艺及操作要点,达到了节油降耗的目的。     

Concentration of tocopherols from soybean sludge by supercritical carbon dioxide

A supercritical fluid extraction method has been applied to test the feasibility of tocopherol concentration from soybean sludge with carbon dioxide at temperatures and pressures ranging from 35 to 70°C and 200 to 400 bar, respectively. The supercritical solubility of the esterified soybean sludge was over 4–6 times greater than that of the original soybean sludge. By a simple batch-type one-stage method the tocopherols in the esterified soybean sludge could be concentrated up to 40 wt%. The overall results of the present study show that soybean sludge initially containing about 13–14 wt% tocopherols may require a countercurrent multistage column to be highly and effectively concentrated.     

实时数据仓库中一种改进的数据流更新算法

为实现数据仓库中数据的高效集成,针对数据偏斜分布现象,提出一种改进的数据流更新算法EH-JOIN。该算法对传统散列连接方法进行改进,利用索引将部分频繁使用的主数据存储在内存中,解决了高速数据流下的磁盘频繁访问问题。实验结果表明,与MESHJOIN算法和R-MESHJOIN算法相比,EH-JOIN算法的服务速率在磁盘存储关系集保持适当大小时分别提高了96%和81%,在内存大小不同时提高了57%和48%。     

广西产迷迭香挥发油化学成分的分析

水蒸气蒸馏法提取广西百色地区迷迭香茎、叶中的挥发油,利用GC-MS联用仪进行了分析。共分离出36个峰,鉴定了其中31个化学成分,占总含量的97.08%。其主要成分为1,8-桉叶素、α-蒎烯、樟脑、莰烯、α-松油醇、乙酸龙脑酯及龙脑等。     

Continual conversion of free fatty acid in rice bran oil to triacylglycerol by immobilized lipase

Rice bran oil containing 30–50% free fatty acid was continually converted to an oil containing more than 75% of triacylglycerol (TG) by means of immobilized lipase. The reaction was carried out at 60°C for 24 h with dehydration and reactant mixing by dry nitrogen flow under a positive nitrogen atmosphere. Enzymatic TG synthesis with evaporation by heating was not suitable because of the increasing peroxide value of the oil. Part of this article was presented at the annual meeting of the Japan Oil Chemists' Society at Sendai, Japan, October, 16, 1990.     

我公司进行热电联产的可行性分析

大压差减温减压是能的严重贬值。根据公司供热现状，分析了热电联产的可行性，利用蒸汽余压发电后，再供生产系统各热用户，这样既节约了能源又缓解了集团公司用电紧张的局面，而且有相当可观的经济效益。