水文自动测报系统防雷的探讨

水文自动测报系统若配备有线／无线（GSM，GPRS）双通道，可提高系统的可靠性，保证系统的畅通。然而，有线组网方式最致命弱点是防雷能力差，针对防雷问题，在实践中探讨其有效途径，论述接地装置的设计、安装中应注意的几个问题，并介绍在实践中电话线防雷从一级防护发展到三级防护，提高防雷的效果，有待在实践中，再认识，再提高。     

Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

新型无杆水力采油装置研制与应用

针对中原油田中后期开发存在的液面降低、泵挂加深使得抽油机载荷增加、冲程损失增大、杆管偏磨严重等问题,研制了新型无杆水力采油装置。该装置采用球阀换向,冲程长、冲次低。现场试验时SC38—74—4.8型无杆水力采油装置与常规管式抽油泵联用,下泵深度1650m,冲程4.8m,冲次2.7min-1,日注水量72m3,产出液60m3。结果表明,新型无杆水力采油装置延长了抽油泵的使用寿命,彻底根除了杆管偏磨,采用球阀换向,对动力液要求较低,日常维护简单。     

电荷耦合图像传感器在细线直径测控系统中的应用

文中给出了一个以氟化氪固体激光器做光源，以电荷耦合图像传感器为光屏，应用夫朗禾费衍射原理，实现对细丝直径在线检测自动控制。该方案对相关企业质量控制的自动化是有意义的。     

精密铜带圆盘纵剪机

通过对精密铜带圆盘剪切机的工作原理和工艺过程进行研究，对引进的美国剪切机进行了技术改造，设计制作了新的装置，实现了软态铜带的剪切。     

从生产角度论述空分设备“有效产品成本”

引入空分设备“有效产品成本”概念，以气体成本算法和液体成本算法对空分设备正常产品单位成本和有效产品单位成本进行了比较，举例计算了液化装置的产品成本，提出利用“有效产品成本”概念来组织空分设备生产。     

USB技术在飞机外场设备测试中的应用

通用串行总线（USB）是近年来流行的一种新的微机总线接口标准，它可以实现较传统方式更有效、更经济、更多点的数据采集，详细介绍了利用USB技术实现飞机外场快速测试的方法。     

立井提升井底罐笼弹性承接装置的现场试验

介绍了井底罐笼弹性承接装置的基本原理,给山了现场试验方法及步骤,利用冲击减速度测试仪测出了罐笼冲击减速度曲线,为今后研究罐笼承接冲击动力学行为提供了试验基础。     

Design of nonlinear controllers for active vehicle suspension with state constraints

Design of active vehicle suspension has tradeoffs between three main performance metrics (passenger comfort, suspension deflection and road holding ability). It has been known that each performance can be achieved by H _∞ controller and they can be gathered by LPV (Linear Parameter Varying) method. However, because the suspension deflection limit was not explicitly considered, this limit may be exceeded. In this paper, the authors propose a “reference shaping“ based method in order to improve the control performance. In this approach, a “virtual reference” signal is imposed to the system such that the suspension deflection is kept small. The effectiveness of the approach is examined by numerical simulations. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

除沫器自动冲洗装置的设计及应用

本文针对Ⅰ效二次蒸汽折流板式除沫器需定时冲洗的实际情况，设计了一套冲洗间隔灵活可调的自动冲洗装置，该装置结构简单、工作可靠，易于实现，有一定的实用价值。