考虑中主应力效应Gudehus-Bauer亚塑性模型的改进

针对Gudehus-Bauer亚塑性模型不能考虑中主应力影响,在Gudehus提出的响应包络线理论基础上,提出了在模型的非线性项乘以一个考虑中主应力的因子进行改进.这种改进增加了土体剪切时的强度,改变了土体受压时的变形.新模型对中主应力的变化在中主应力参数影响程度能够有一定反映.同时将改进后的模型与中主应力参数为常量的真三轴实验进行了比较.结果表明改进后的模型可以模拟中主应力对砂土强度和变形特性的影响,能够定量预测由于中主应力影响产生的体积应变.     

电磁领域中复超越方程的遗传算法求解方法

将遗传算法与参数跟踪策略有效结合,跟踪过程中进行搜索域压缩与位移操作,形成了一种功能强大的新算法,可成功应用于电磁领域中各种各样复超越方程的高精度求解问题.在算法实现过程中,使用参数跟踪策略有效地缩小了搜索区域,保证了解的单一性,提高了运算速度;使用动态搜索域提高了解的精度;应用三阶差商公式预估新的搜索中心,使运算速度得以进一步提高.应用本文发展的算法详细求解了终端短路法测量材料的复介电常数时得到的复超越方程和部分填充矩形波导的特征方程,计算结果表明该算法能够轻松地解决复超越方程中的多值问题,解集完备性好,算法鲁棒性强.     

新型钢铅组合耗能器性能试验及参数优选

为了考察新型钢铅组合耗能器(NCSLD)的力学性能和提高其耗能能力,利用电液伺服压剪试验机对NCSLD耗能器进行力学性能试验,采用ANSYS实体建模的方法对耗能器进行大量的数值分析,并对性能试验和数值分析的结果进行对比,研究耗能器的滞回特征参数与其6个几何参数之间的关系,回归出二者之间的公式.提出评价耗能器性能优劣的标准及其附加条件,并以此标准为依据,利用均匀设计法和遗传算法分别对耗能器的6个几何参数进行优选.结果表明遗传算法的选优效果要好于均匀设计法,同时得到一系列性能良好的NCSLD耗能器.     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

Electroless nickel plating on the surface of carbon fibers

The electroless nickel plating on the surface of carbon fibers was prepared by pretreating the carbon fibers in order to increase their conductivity,and consequently enhance the EMI shielding effectiveness of the composites.The relationship between the performance of depositing coat and pH value,temperature,reaction time and the way of agitation was studied.Results show that the depositing quality is stable under pH between 4.5 and 5.0,temperature between 75 ℃ and 85 ℃,reaction time for 10 min and air agitation.The uniform and compact nickel layer deposited on carbon fibers was proved by XRD and SEM,and the electrical resistivity of carbon fibers with nickel coating was tested.Results indicate that the electrical resistivity of carbon fibers with electroless nickel plating is decreased by an order of magnitude compared with that of carbon fibers.It means that nickel coating can greatly improve the electromagnetic interference shielding properties of carbon fibers.     

Effective prediction of DEA model by neural network

In this paper,a fast neural network model for the forecasting of effective points by DEA model is proposed,which is based on the SPDS training algorithm.The SPDS training algorithm overcomes the drawbacks of slow convergent speed and partially minimum result for BP algorithm.Its training speed is much faster and its forecasting precision is much better than those of BP algorithm.By numeric examples,it is showed that adopting the neural network model in the forecasting of effective points by DEA model is valid.     

Zonal disintegration phenomenon in enclosing rock mass surrounding deep tunnels -- Elasto-plastic analysis of stress field of enclosing rock mass

The zonal disintegration phenomenon (ZDP) is a typical phenomenon in deep block rock masses. In order to investigate the mechanism of ZDP, an improved non-linear Hock-Brown strength criterion and a bi-linear constitutive model of rock mass were used to analyze the elasto-plastic stress field of the enclosing rock mass around a deep round tunnel. The radius of the plastic region and stress of the enclosing rock mass were obtained by introducing dimensionless parameters of radial distance. The results show that tunneling in deep rock mass causes a maximum stress zone to appear in the vicinity of the boundary of the elastic and the plas-tic zone in the surrounding rock mass. Under the compression of a large tangential force and a small radial force, the rock mass in the maximum stress zone was in an approximate uniaxial loading state, which could lead to a split failure in the rock mass.     

一种光纤陀螺随机漂移的高精度建模方法

为减小光纤陀螺随机漂移,采用时间序列分析法对其进行ARMA模型辨识.提出一种全局最优的模型阶次搜索算法,将模型适用性检验方法中的BIC(Bayesian information criterion)用于模型阶次搜索,并采用Pandit-Wu建模思想,把二维搜索化为一维搜索,得到了模型阶次的一致性估计.提出了一种改进的U-C算法,并与长自回归模型计算残差法相结合共同估计模型参数.它将非线性参数估计过程转化为线性过程,使用了正置与逆置漂移时序参与估计,以前向和后向模型的滤波误差平方和最小为参数估计的指标,在p+1维空间中求极小值.采用上述方法确定的模型其残差标准差为0.002 4°,最大预报误差为0.011 2°,能准确预报光纤陀螺随机漂移趋势.     

无机纳米-聚酰亚胺复合薄膜介电性研究

测试了纳米Al2O3-聚酰亚胺(PI)复合薄膜和纳米SiO2-聚酰亚胺复合薄膜的介电常数、介质损耗角正切和电导电流特性.结果表明,随着无机物含量的增加,两种复合薄膜的相对介电常数和介质损耗角正切增大,电老化阈值减小;无机物含量相同时,Al2O3-聚酰亚胺复合薄膜的相对介电常数和介质损耗角正切比SiO2-聚酰亚胺复合薄膜大,电导电流大,电老化阈值小.     

巴洛沙星的合成研究

巴洛沙星是一种新型喹诺酮类抗感染药物。从反应温度、反应时间、反应物料摩尔配比和反应溶剂等对合成的影响进行了详细研究。结果表明,其优惠工艺合成条件为:以S1为溶剂,反应温度40℃,反应时间4 h,反应物料摩尔配比n螯合物Ⅰ∶nMAP=1∶1,产品收率79.5%,含量91.4%。