松辽盆地南部岩性圈闭识别技术及效果

寻找隐蔽油气藏一直是油气勘探中的难题,我国东部吉林油田的中浅层已进入高成熟勘探阶段,油气勘探已由早期的构造圈闭勘探转变为现今的以隐蔽圈闭勘探为主的阶段。本文针对松辽盆地南部的西部前缘带三维连片工区及伊通地堑岔路河断陷,综合应用构造精细解释、声波曲线重构波阻抗反演、层序地层学、地震相及沉积(微)相分析、模型正演、地震属性分析、频谱分解及三维可视化等技术手段,所提供的多口探井获得工业油气流或有良好的油气显示,取得了较好的解释效果。     

Performance evaluation of a water/silicone oil two‐phase partitioning bioreactor using Rhodococcus erythropolis T902.1 to remove volatile organic compounds from gaseous effluents

BACKGROUND: In the framework of biological processes used for waste gas treatment, the impact of the inoculum size on the start‐up performance needs to be better evaluated. Moreover, only a few studies have investigated the behaviour of elimination capacity and biomass viability in a two‐phase partitioning bioreactor (TPPB) used for waste gas treatment. Lastly, the impact of ethanol as a co‐substrate remains misunderstood. RESULTS: Firstly, no benefit of inoculation with a high cellular density (>1.5 g L^?1) was observed in terms of start‐up performance. Secondly, the TPPB was monitored for 38 days to characterise its behaviour under several operational conditions. The removal efficiency remained above 63% for an inlet concentration of 7 g isopropylbenzene (IPB) m^?3 and at some time points reached 92% during an intermittent loading phase (10 h day^?1), corresponding to a mean elimination capacity of 4 × 10^?3 g L^?1 min^?1 (240 g m^?3 h^?1) for a mean IPB inlet load of 6.19 × 10^?3 g L^?1 min^?1 (390 g m^?3 h^?1). Under continuous IPB loading, the performance of the TPPB declined, but the period of biomass acclimatisation to this operational condition was shorter than 5 days. The biomass grew to approximately 10 g L^?1 but the cellular viability changed greatly during the experiment, suggesting an endorespiration phenomenon in the bioreactor. It was also shown that simultaneous degradation of IPB and ethanol occurred, suggesting that ethanol improves the biodegradation process without causing oxygen depletion. CONCLUSION: A water/silicone oil TPPB with ethanol as co‐substrate allowed the removal of a high inlet load of IPB during an experiment lasting 38 days. Copyright © 2008 Society of Chemical Industry     

Multi-site phase transfer catalyst assisted radical polymerisation of glycidyl methacrylate using potassium peroxydisulphate as initiator – a kinetic study

In this work, the kinetics and mechanism of free-radical polymerisation of glycidyl methacrylate (GMA) using potassium peroxydisulphate (PDS) as water soluble initiator in the presence of synthesized 1, 4-Bis (tributyl methyl ammonium) benzene dichloride (TBMABDC) as multi-site phase transfer catalyst (MPTC) was studied. The polymerisation reactions were carried out under inert and unstirred conditions at constant temperature of 60 ± 1°C in cyclohexane/water biphase media. The role of concentrations of monomer, initiator, catalyst and volume fraction of aqueous phase, solvent polarity and temperature on the rate of polymerisation (Rp) was ascertained. The order with respect to monomer and initiator was found to be unity. The order with respect to catalyst was found to be 0.51. The rate of polymerisation is independent of ionic strength and pH of the medium. However, an increase in the polarity of solvent has slightly increased the Rp value. Based on the results obtained, a suitable kinetic scheme has been proposed to account for the experimental observations and its significance discussed.     

负载型固体碱催化合成亚苄基丙酮

研究了用固体碱 KOH/Al_2O_3催化合成苯叉丙酮,确定了合成的最佳工艺条件:n(苯甲醛)∶n(丙酮)=1∶4.催化剂用量2g,催化剂最佳负载量12mmol/g,反应温度40～45℃,反应时间为3h,产率达88%以上。     

行波管放大器相位噪声的分析及其抑制

主要分析规则调相信号对行波管放大器频谱纯度的影响,并且根据行波管放大器相位噪声产生的过程和原因,提出两种抑制相位噪声的方法.     

横向各向同性介质中的初至波旅行时计算

本文直接采用Thomsen导出的横向各向同性介质中的相速度、群角与相角、群速度与相速度的精确函数关系,提出了一种新的具有任意各向异性强度的横向各向同性介质中的初至波旅行时计算方法,它不同于Faria等人给出的采用群速度近似公式(Byun)的仅适应弱各向异性的初至波旅行时计算方法。该新算法在计算具有任意各向异性强度的横向各向同性介质中的初至波旅行时时,并不显著地增大计算时间。分析对比由新算法得到的初至波旅行时的等值线图和由交错网格有限差分波场模拟得到的波场快照表明,无论是对弱各向异性还是对强弱各向异性,新算法都具有较高的精度;随着各向异性强度的增大,新算法的计算结果与采用近似公式计算结果的差值也随之增大。     

Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

Boiling: Size Distribution of Bubbles as Demanded by the Principle of Maximum Information

The principle of maximum informational entropy is used to find the probability density function for the departure radius of a bubble in boiling on a solid surface. A general relation is derived, which leads to particular expressions.     

On strategies for enforcing interfacial constraints and evaluating jump conditions with the extended finite element method

We consider a problem stemming from recent models of phase transitions in stimulus‐responsive hydrogels, wherein a sharp interface separates swelled and collapsed phases. Extended finite element methods that approximate the local solution with an enriched basis such that the mesh need not explicitly ‘fit’ the interface geometry are emphasized. Attention is focused on the weak enforcement of the normal configurational force balance and various options for evaluating the jump in the normal component of the solute flux at the interface. We show that as the reciprocal interfacial mobility vanishes, it plays the role of a penalty parameter enforcing a pure Dirichlet constraint, eventually triggering oscillations in the interfacial velocity. We also examine alternative formulations employing a Lagrange multiplier to enforce this constraint. It is shown that the most convenient choice of basis for the Lagrange multiplier results in oscillations in the multiplier field and a decrease in accuracy and rate of convergence in local error norms, suggesting a lack of stability in the discrete formulation. Under such conditions, neither the direct evaluation of the gradient of the approximation at the phase interface nor the interpretation of the Lagrange multiplier field provide a robust means to obtain the jump in the normal component of solute flux. Fortunately, the adaptation and use of local, domain‐integral methodologies considerably improves the flux evaluations. Several example problems are presented to compare and contrast the various techniques and methods. Copyright © 2004 John Wiley & Sons, Ltd.     

Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape‐memory alloys

This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension–torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd.