多目标水平井水平段三维设计数学模型

用柱面法推导出多目标水平井水平段三维设计数学模型，并给出了三维设计所需井斜方位角及井斜角的简单计算公式。该数学模型具有一般性，可以方便地编制成计算机程序，对于多目标水平井水平段的优化设计和所有水平井入靶前的随钻修正设计都非常适用。     

Drying of Prone to Twist Boards in a Pre-Twisted Position

A method to minimize twist has been investigated; i.e., drying the boards in a pre-twisted position. It has been found that Norway spruce boards can be deformed toward straightness by this method. The force exerted by a board on its holders during drying in a pre-twisted position has been measured. When the variation in torsional stiffness as a function of temperature and moisture content is accounted for, it is found that a creep deformation of the board occurs both during the drying phase and the cooling phase. In addition to mechano-sorptive creep, a deformation released by a change in temperature also seems to occur.     

冷弯型钢纵向变形的理论分析及计算

对冷弯型钢的纵向变形过程进行了力学分析，得到了变形微分方程，求得了转动角的理论公式，并对其变形形状进行了分析计算。     

一种8毫米波变张角,半径突变多模圆锥馈源

我们研制了一种8毫米波变张角、半径突变的多模圆锥馈源。计算出其模比并推导出其辐射方向图公式;给出其在两个主平面——E平面与H平面上的辐射方向图和波束场分布特性的测试结果以及电压驻波比VSWR的测量结果;同时给出频带和旁瓣特性。分析与测试共同表明,在34.5GHz～37GHz频带里,该多模馈源的辐射图在大于24dB范围内获得幅度等化且不出现旁瓣,因此具有一定的应用价值。     

Contact interaction of double titanium and chromium diboride with Fe-Cr alloys

The kinetics of wetting double titanium and chromium diboride by iron-based alloys with different chromium content is studied. It is shown that contact angles are formed in such systems over the range 0–10°. The energy parameters of wetting are calculated. It is established that chromium as a surface-active element promotes Fe-Cr alloy spreading on the diboride surface. The microstructure of the interaction area is studied. It is shown that terminal solid solutions and eutectics are formed in the TiCrB₂-(Fe-Cr) system. The optimum compositions of the metallic binder are determined for TiCrB₂-based composite materials. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 1–2(453), pp. 109–115, 2007     

小角度控制网的平差方法探讨

本文从改变常规平差元素——角度的观点,阐述了小角度网的平差方法.     

钻削中产生迷切现象的机理研究

随着科学技术的发展．对孔加工精度的要求越来越高．钻削过程中的速切现象对孔加工的形状精度、位置精度有很大的影响．本文用试验、观察、解析的方法分析了钻头迷切现象与各种因素的关系，对提高孔加工精度有了新的揭示．     

凸轮机构推程、回程运动角的最佳匹配及其求解方法

在推程、回程运动角之和 Φ0 +Φ′0 =C(定值 )的情况下 ,必存在某一对推程、回程运动角的最佳匹配 Opti-m um{ Φ0 ,Φ′0 } ;当选用该最佳匹配时 ,对心式直动从动杆盘形凸轮基圆半径 r0 取得最小值 r0 min。本文在揭示出上述事实的基础上 ,研究解决了当选取最佳匹配 Optim um{ Φ0 ,Φ′0 }时 ,按许用压力角 [α]条件求解对心式直动从动杆盘形凸轮基圆半径最小值 r0 min的解析法。     

钢管对接环焊缝超声波检测对比试块改进的设想

讨论了石油、电力、机械等行业钢管对接环焊缝超声波检测对比试块数量太多给超声波检测带来的问题,针对这一问题设计了通用螺线型对比试块,即将大量常用规格的对比试块整合成少数几块螺线型试块,该试块具有连续的曲率,完全能在其适用范围内很好地与各种管径的管件相对应,成功地解决了对比试块数量多、单块适用范围小、携带不便等问题。     

POM晶体倍频相位匹配角的设计及应用

计算了新型有机晶体ＰＯＭ的倍频匹配角，并将ＰＯＭ作为倍频器件用于超短光脉冲的测量中。