渗碳钢变温渗碳过程分析

以２０ＣｒＭｎＴｉ钢为例,建立了连续冷却渗碳模型;对变温渗碳质量进行了分析计算;对渗碳后的组织情况进行预测,从而对变温渗碳的可行性进行了理论论证．     

浅析40T支架搬运车液压系统油温变化对其效率的影响

介绍了油温变化对40T支架搬运车液压系统油液黏度、液压介质和橡胶类密封件的影响,分析了液压系统的总发热功率、总散热功率,结合动态热平衡的计算,找出了液压系统总效率与油温变化之间的关系,并给出其函数关系式。根据这种关系,通过一种工况的油温实测数据取样,计算出相应的效率值,定量地验证了液压系统油温变化引起效率变化的关系,得出了总效率随着温度变化而变化的结论,即温差增大时,总效率降低;温差减小时,总效率增大。通过该结论可以全面掌握系统的工作状态,通过降低油温有效提高效率。     

Analysis of microwave brightness temperature of lunar surface and inversion of regolith layer thickness:Primary results of Chang-E 1 multi-channel radiometer observation

In China’s first lunar exploration project, Chang-E 1 (CE-1), a multi-channel microwave radiometer was aboard the satellite, with the purpose of measuring microwave brightness temperature from lunar surface and surveying the global distribution of lunar regolith layer thickness. In this paper, the primary 621 tracks of swath data measured by Chang-E 1 microwave radiometer from November 2007 to February 2008 are collected and analyzed. Using nearest neighbor interpolation based on the sun incidence angle in ...     

Thermal and cardiovascular strain imposed by motorcycle protective clothing under Australian summer conditions

Motorcycle protective clothing can be uncomfortably hot during summer, and this experiment was designed to evaluate the physiological significance of that burden. Twelve males participated in four, 90-min trials (cycling 30 W) across three environments (25, 30, 35 °C [all 40% relative humidity]). Clothing was modified between full and minimal injury protection. Both ensembles were tested at 25 °C, with only the more protective ensemble investigated at 30 and 35 °C. At 35 °C, auditory canal temperature rose at 0.02 °C min^?1 (SD 0.005), deviating from all other trials (p < 0.05). The thresholds for moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 min (SD 20.6) and 180 min (SD 33.0), respectively. Profound hyperthermia might eventuate in ~10 h at 30 °C, but should not occur at 25 °C. These outcomes demonstrate a need to enhance the heat dissipation capabilities of motorcycle clothing designed for summer use in hot climates, but without compromising impact protection.

Practitioner’s Summary:

Motorcycle protective clothing can be uncomfortably hot during summer. This experiment was designed to evaluate the physiological significance of this burden across climatic states. In the heat, moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 and 180 min, respectively.     

Self-consistent gradient flow for shape optimization

We present a model for image segmentation and describe a gradient-descent method for level-set based shape optimization. It is commonly known that gradient-descent methods converge slowly due to zig–zag movement. This can also be observed for our problem, especially when sharp edges are present in the image. We interpret this in our specific context to gain a better understanding of the involved difficulties. One way to overcome slow convergence is the use of second-order methods. For our situation, they require derivatives of the potentially noisy image data and are thus undesirable. Hence, we propose a new method that can be interpreted as a self-consistent gradient flow and does not need any derivatives of the image data. It works very well in practice and leads to a far more efficient optimization algorithm. A related idea can also be used to describe the mean-curvature flow of a mean-convex surface. For this, we formulate a mean-curvature Eikonal equation, which allows a numerical propagation of the mean-curvature flow of a surface without explicit time stepping.     

A parallel preconditioned conjugate gradient solution method for finite element problems with coarse–fine mesh formulation

The object of this paper is a parallel preconditioned conjugate gradient iterative solver for finite element problems with coarse-mesh/fine-mesh formulation. An efficient preconditioner is easily derived from the multigrid stiffness matrix. The method has been implemented, for the sake of comparison, both on a IBM-RISC590 and on a Quadrics-QH1, a massive parallel SIMD machine with 128 processors. Examples of solutions of simple linear elastic problems on rectangular grids are presented and convergence and parallel performance are discussed.     

Physiological responses to simulated firefighter exercise protocols in varying environments

For decades, research to quantify the effects of firefighting activities and personal protective equipment on physiology and biomechanics has been conducted in a variety of testing environments. It is unknown if these different environments provide similar information and comparable responses. A novel Firefighting Activities Station, which simulates four common fireground tasks, is presented for use with an environmental chamber in a controlled laboratory setting. Nineteen firefighters completed three different exercise protocols following common research practices. Simulated firefighting activities conducted in an environmental chamber or live-fire structures elicited similar physiological responses (max heart rate: 190.1 vs 188.0 bpm, core temperature response: 0.047°C/min vs 0.043°C/min) and accelerometry counts. However, the response to a treadmill protocol commonly used in laboratory settings resulted in significantly lower heart rate (178.4 vs 188.0 bpm), core temperature response (0.037°C/min vs 0.043°C/min) and physical activity counts compared with firefighting activities in the burn building.

Practitioner Summary: We introduce a new approach for simulating realistic firefighting activities in a controlled laboratory environment for ergonomics assessment of fire service equipment and personnel. Physiological responses to this proposed protocol more closely replicate those from live-fire activities than a traditional treadmill protocol and are simple to replicate and standardise.     

Psychological impact of air velocity variations in a ventilated room

Two experiments investigated the psychological impact of two velocity conditions (constant low velocity (V1) and variations of low and high velocity (V2)) in two temperature conditions (Experiment 1: an air temperature increase from 21°C to 24°C; Experiment 2: an air temperature increase from 25°C to 27°C) in females and males, aged 16 to 18 years, under realistic classroom conditions during an exposure period of 80 min. It was predicted that the V2 room condition compared to the V1 room condition would be more beneficial for subjects' perceived room temperature and air quality, self-reported affect and cognitive performance. The results obtained showed no significant effects on cognitive performance. However and as predicted, in Experiment 1, the subjects in the V2 compared to those in the V1 room condition felt that the air temperature decreased (while it de facto increased) and reported a constant level of high activation. In Experiment 2, the subjects in the V2 room condition felt that the air temperature increased less and reported that their unactivated unpleasantness increased less and activated pleasantness decreased less than it did for subjects in the V1 room condition. All this indicates, as was suggested by Wigö et al. (2002 Wigö, H., Knez, I. and Sandberg, M. 2002. Effects of velocity variations in ventilated room on comfort, affect and cognitive performance. Proceedings of 9th International Conference on Indoor Air Quality and Climate, 4: 635–640.  [Google Scholar]), that a cooling effect, induced by air velocity variations, might be beneficial for subjects in a ventilated room and that their perceived pleasantness of the indoor climate could be met at a higher room temperature than otherwise.     

Oxidation behaviors of Ni-Cr-Al superalloy foams at 1 000 ℃ in air

The oxidation behaviors of Ni-16Cr-xAl （x=4.5%, 9.0%, mass fraction） superalloy foams in air at 1000℃ were investigated. The effects of AI content on the resistance to high temperature oxidation were examined. The oxidation mechanisms of the foams were discussed. The results show that the resistance to the oxidation of the Ni-16Cr-xA1 based alloy at 1 000 ℃ increases with the content of A1 increasing from 4.5% to 9.0%. Complex oxide products are formed on the surface of the superalloy foams after the oxidation. Cr203 and A1203 are the predominant oxides for the scales of the foams with 4.5% A1 and 9% A1, respectively. Excellent high temperature oxidation resistance and superior pore conformation stability for the Ni-16Cr-xA1 based superalloy foam with 9% A1 can be mainly attributed to the formation of relatively continuous and protective A1203 oxides on the surface of the foam.     

载流导体的二维温度场的分析

为分析机电设备导体中电流引起的热分布问题,建立了机电设备的简化有限元模型,对导体进行了自适应网格划分,采用有限元方法求解热导微分方程,得到导体中热分布情况,可以估算导体的形状和尺寸,为机电设备选择合适的导体提供了一种有效的设计方法。