FDTD analysis of switching characteristics in magnetooptic functional devices using magnetostatic surface waves

Collinear magnetooptic interaction with magnetostatic surface waves (MSSW) can be used for wavelength‐selective switches, wavelength filters, and frequency shifters in wavelength‐division‐multiplexed (WDM) photonic networks and optical processing systems. The switching efficiency can be improved with a multilayer waveguide structure. To investigate the dynamic switching characteristics, the FDTD method was employed. The mode conversion between TE and TM mode was successfully demonstrated with FDTD simulation. The filtering characteristics were also evaluated. The FDTD results were compared with the result from the coupled mode theory, and good agreement was obtained. Switching of an optical pulse was also demonstrated by the FDTD method. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(1): 40–47, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20501     

Tuning fuzzy power-system stabilizers in multi-machine systems by global optimization algorithms based on efficient domain partitions

In this paper, the problem of global tuning of fuzzy power-system stabilizers (FPSSs) present in a multi-machine power system in order to damp the power system oscillations is considered. In particular, it is formulated as a problem of global minimization of a multiextremal black-box function over a multidimensional hyperinterval. A global optimization technique, recently proposed, is used for solving the stated problem: the search hyperinterval is partitioned into smaller hyperintervals and the objective function is evaluated only at two vertices corresponding to the main diagonal of the generated hyperintervals, thus avoiding unnecessary ponderous simulations. Then, the performances of this technique are numerically compared with ones of a genetic algorithm (GA).     

Influence of water and ammonia on hydrotreating catalysts and activity for tetralin hydrogenation

The effects of H₂O and NH₃ on the kinetics of the liquid phase hydrogenation of tetralin to decalin at 6.9 MPa and 330°C over commercial P---Ni---Mo/alumina catalysts in the presence of H₂S have been investigated. H₂O functioned as a mild kinetic inhibitor to an extent sensitive to the H₂S level. Quasi in situ XPS was used to investigate the catalyst structure after exposure to H₂0/H₂S.     

Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

空泡溃灭水锤的VOF计算方法

空泡溃灭水锤是核电厂冷却循环系统中较常出现的一种严重的水锤事故。空泡的形成和溃灭是复杂的两相、瞬态过程，对于这一现象的分析是相当困难的。作者尝试着把蒸汽泡的边界看成是冷水流动的自由面，在自由面上考虑蒸汽的凝结。对于自由面的ＶＯＦ算法用了ＶＯＦ算法，取得了令人满意的结果，不仅形象地描绘了空泡的形成和溃灭的过程，而且得到了与实验相符的空泡溃灭高压和弥合速度，因此可为管道设计提供理论基础。     

饲料级磷酸氢钙中氟的几种分析方法比较

本文采用茜素络合酮比色法和氟离子选择电极法对饲料磷酸氢钙进行氟的测定实验对比,得出常用的氟离子选择电极法完全可以代替经典的蒸馏比色法的结论。     

Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

Phase relations in the system ln-CulnS2

By DTA and x-ray diffraction the phase relations in the pseudobinary system In-CuInS₂ have been investigated. CuInS₂ hs a melting point of 1090° C and within this system there is a broad region of liquid immiscibility. A four phase invariant reaction exists at 633° C which is of the form: L₂ = L₁+ CuInS₂ + InS.     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

THE ANALYSIS OF THE SEPARATED LAYERS ALGORITHM BY DOMAIN DECOMPOSITION METHOD

From the principle of of the Domain Decomposition Method (DDM), we analyse the 2nd-order linear elliptic partial differential problems and link the Separated-Layers Algorithm (SLA) with DDM. The mathematical properties of SLA and numerical example are presented to obtain satisfactory computation results. For general linear differential ones, also are the structure of SLA and its characteristics discussed.