Cleaning Efficiency of Amino‐Acid Surfactants with Polyoxyethylene Ether and Isopropanol in Liquid Carbon Dioxide

Although anionic surfactants have a distinct positive influence on the removal of particulate soil, the removal of particulate soils is insufficient in CO₂ compared to perchloroethylene. A series of amino‐acid surfactants was selected as main surfactants to study the influence of polyoxyethylene ether and cosolvent on the cleaning effect. Glu‐C12 and C16(3) gave the best cleaning results, which increased from a detergency value of 4.6 when no surfactants were used to 8.32 when surfactants were used. In all experiments, charged anionic surfactant particles were formed, which are responsible for the removal of particulate soil from fabric by electrostatic repulsion. The use of a cosolvent (Isopropanol [IPA]) had a positive effect on the removal of particulate soil when using Glu‐C12 and TX‐45. However, for other compounding combinations, the addition of IPA had a negative effect on particulate soil removal. Of the cosolvents investigated, IPA was the most suitable. With the polarity of the system increasing after adding IPA, the ethylene oxide groups of TX‐45 were partially extended to CO₂. Through the steric effects of branched methyl groups, the cleaning effect was improved.     

Catalysts for the Ethoxylation of Esters

The intermediates for the production of nonionic surfactants can be derived from petrochemicals and/or from renewable raw materials. In both, the role of catalysis is fundamental. In this paper the main results reported in the literature related with the catalysis for ethoxylation of fatty esters will be reviewed. The main open challenges for these technologies will be outlined.     

Mono‐, Di‐ and Tetra‐Cationic Surfactants as Carbon Steel Corrosion Inhibitors

Corrosion inhibition of three new synthesized cationic surfactants, N‐(2‐(((Z)‐4‐(pyridin‐4‐yl)but‐3‐en‐1‐yl)amino)ethyl)‐N‐(2‐((E)‐(pyridin‐4‐ylmethylene)amino)ethyl)dodecan‐1‐aminium bromide I(4N), N¹,N²‐didodecyl‐N¹‐((Z)‐4‐(pyridin‐4‐yl)but‐3‐en‐1‐yl)‐N²‐(2‐((E)‐(pyridin‐4‐ylmethylene)amino)ethyl)ethane‐1,2‐diaminium bromide II(4N) and 1‐dodecyl‐4‐((E)‐((2‐(dodecyl(2‐(dodecyl((Z)‐4‐(1‐dodecylpyridin‐1‐ium‐4‐yl)but‐3‐en‐1‐yl)ammonio)ethyl)ammonio)ethyl)imino)methyl)pyridin‐1‐ium bromide IV(4N) on carbon steel was investigated by weight loss, electrochemical impedance spectroscopy and polarization measurements. Results show that the synthesized cationic surfactants inhibit corrosion of carbon steel in 1 M HCl. The inhibitive action occurs by virtue of adsorption on the metal surface following a Langmuir adsorption isotherm model. Polarization curves reveal that the investigated cationic surfactants can be classified as mixed inhibitor types. The variations in the corrosion inhibition efficiency between three cationic surfactants are correlated with their chemical structures, with more hydrophobic surfactants yielding higher inhibition efficiency.     

Surface and Biological Activity of Some Prepared Iminium Surfactants Based on Schiff Bases

A series of novel iminium surfactants were prepared through quaternization of different prepared fatty Schiff bases with benzyl chloride. The chemical structures were confirmed using FTIR, ¹H-NMR and mass spectroscopy. The surface properties and biological activity of these surfactants were investigated. The surface parameters including critical micelle concentration (CMC), maximum surface excess (Γ_max) and minimum surface area (A _min), Efficiency (PC₂₀) and Effectiveness (π_CMC) as well as the free energy of micellization ( $ \Updelta G_{\text{mic}}^{\text{o}} $ ) and adsorption ( $ \Updelta G_{\text{ads}}^{\text{o}} $ ) were calculated. It was found that the prepared compounds have good surface and biological activity.     

Hydraulic resistance of rigid polyurethane foams. I. Effect of different surfactants on foam structure and properties

Foams used in buoyancy applications must resist penetration by water at significant depths of immersion. The behavior of water blown rigid polyurethane foam at different water pressures from 0 to 3 MPa are studied in this work. The effects of different surfactants on the cell structure and hydraulic resistance of the foams are examined. The foams have densities in the range of 145 to 160 kg/m³. With increasing applied hydraulic pressure, it is found that the foams have very small buoyancy losses at low pressures but beyond a threshold pressure, buoyancy losses increase rapidly. The threshold pressures of the foams increase with decrease in cell window area. A cell window is the lamella of the foam material that separates two adjacent cells. The cell sizes of the foam are found to correlate with the size of the air bubbles entrained during initial mixing. Surfactants, which reduce the surface tension of the polyol to the greatest extent, are found to give the finest initial bubbles, smaller cells, and foams with the highest hydraulic resistance. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2821–2829, 2004     

Glucamine-based gemini surfactants II: Gemini surfactants from long-chain <Emphasis Type="Italic">N</Emphasis>-alkyl glucamines and epoxy resins

Gemini surfactants were synthesized by reaction of long-chain N-alkyl glucamines with epoxy resins. Analogous to the synthesis of gemini surfactns from long-chain N-alkyl glucamines and α, ω-diepoxides (1), the reaction in methanol at 70°C could be used to convert the starting materials selectively and almost quantitatively. N-Octyl glucamine, N-decyl glucamine, and N-dodecyl glucamine were combined with several epoxy resins, mainly technical glycidyl ethers of diols. Syntheses involving equimolar amounts of amine resulted in quantitative conversion of the epoxy resins, and epoxide and products could be isolated quantitatively by removing the solvent. Gemini surfactants having hydrophobic or hydrophilic spacers were preparared according to their structures and the hydrophilic properties of the epoxy resin. Surface tensions were measured, and foaming propertiers were examined to characterize surface-active properties of these surfactants. The more hydrophilic products were of particularly high surface activity. Tensiometric studies showed a reduction of surface tension to 30–34 mN/m and critical micelle concentrations in the range of 2–35 mg/L. Comparison of gemini surfactants from long-chain N-alkyl glucamines and diepoxides of α,ω-diolefins (chain lengths: C₈, C₉, C₁₀, and C₁₄) with those based on epoxy resins showed similar or lower surface activities using hydrophobic epoxy resins and much better surface-active properties using hydrophilic epoxy resins (e.g., based on glycerol). This, together with the easier availability, makes the epoxy resin-based products interesting surfactants. Products having very good surface-active properties are available, especially using glycidyl ether of aliphatic diols or glycerol.     

表面活性剂对硅酸结晶行为影响的研究

探讨了表面活性剂对硅酸结晶行为的影响，着重讨论了非离子表面活性剂的加速结晶作用。通过结晶形态、结晶速度、表面张力等的观察和测定，提出了活性剂聚集体和胶团的成核机理。     

Evaulation of irritation potential of surfactant mixtures

Irritation potential of sodium laureth sulfate (SLES) alone, and in combination with lauryl glucoside (LG), polysorbate 20 (PS) and cocoamidopropyl betaine (CAPB) was tested in 13 human subjects. Four main and six sub-formulations were prepared and evaluated. Formulations were applied to the forearm as a 24 h close patch study. Irritation was scored by two different methods using an in vivo clinical protocol based on visual scoring and on the stratum corneum capacitance measurement. Irritation was found to be dose dependent. At 2 mg/patch level ten subjects did not show any skin reaction. At 20 mg/patch level eleven subjects showed a broad range of skin irritation. The highest irritation was observed with the formula that contained SLES, LG, and cocamide DEA together. Among the sub-formulations, cocamide DEA showed the highest irritation grade. A statistically significant correlation was observed between visual, clinical and corneometer scores. It was concluded that the irritation potential of surfactants was related to the total surfactant concentration, application mode, and the thermodynamic activity of molecules in the solution as well as the chemical structure of the surfactant molecules.     

New strategies for the Hofmann reaction

Some new strategies, such as the use of hydrotropes, surfactants, co-solvent, etc., were applied to the Hofmann reaction of fatty amides to obtain isocyanates, amines and carbamates. Additionally, some industrially important aromatic amines were synthesised.