调节对象参数和运动特性随工况变化的分析

水轮机调节对象的许多参数都是随运行工况变化的。以调节对象线性化模型为基础，从1个实例计算人手，计算了不同工况下水轮机传递系数和发电机6个参数的变化情况，进而计算这些参数变化对捌节对象特征根的影响。通过汁算表明，其水力振荡衰减速度与出力有关．而系统的其他运动特性随工况变化较小。     

基于NURBS的PDE曲面构造法研究及应用

由非均匀有理Ｂ样条曲线曲面给定边界条件，用偏微分方程来构造曲面，以参数“ａ”控制其整体形状，本文分析其思路原理及过程，并列举了在ＣＡＤ上的应用，最后分析了优缺点。     

34CrMoV结构钢动态再结晶行为研究

应用Gleeble-1500热模拟实验机进行等温压缩试验,研究了变形工艺参数对34CrMoV结构钢动态再结晶行为的影响.结果表明,其流变应力随变形温度升高而降低,随应变速率提高而增大;随着应变速率的降低,应变量的增加和变形温度的升高,动态再结晶速度加快且奥氏体晶粒得到细化.     

打管理基础 求科技支撑 取创新成效 全力履行精益保供核心使命

主要介绍了热电厂近几年来在技术管理方面取得的主要工作经验，以及围绕生产经营开展科技创新所取得的成绩，并且针对当前形势，进一步提出了热电厂今后一个时期科技工作的指导思想、任务目标和措施。     

基于模糊匹配的平面连杆机构反求设计研究

对平面连杆机构曲线进行了分析,提出了用一组特征参数来描述连杆曲线,建立了连杆曲线图谱库,并将模糊论应用于连杆机构的曲线匹配,从而获取所求的机构参数.最后给出了应用实例,证实了该方法的可行性与有效性.     

Nonlinear black-box modeling in system identification: a unified overview

A nonlinear black-box structure for a dynamical system is a model structure that is prepared to describe virtually any nonlinear dynamics. There has been considerable recent interest in this area, with structures based on neural networks, radial basis networks, wavelet networks and hinging hyperplanes, as well as wavelet-transform-based methods and models based on fuzzy sets and fuzzy rules. This paper describes all these approaches in a common framework, from a user's perspective. It focuses on what are the common features in the different approaches, the choices that have to be made and what considerations are relevant for a successful system-identification application of these techniques. It is pointed out that the nonlinear structures can be seen as a concatenation of a mapping form observed data to a regression vector and a nonlinear mapping from the regressor space to the output space. These mappings are discussed separately. The latter mapping is usually formed as a basis function expansion. The basis functions are typically formed from one simple scalar function, which is modified in terms of scale and location. The expansion from the scalar argument to the regressor space is achieved by a radial- or a ridge-type approach. Basic techniques for estimating the parameters in the structures are criterion minimization, as well as two-step procedures, where first the relevant basis functions are determined, using data, and then a linear least-squares step to determine the coordinates of the function approximation. A particular problem is to deal with the large number of potentially necessary parameters. This is handled by making the number of ‘used’ parameters considerably less than the number of ‘offered’ parameters, by regularization, shrinking, pruning or regressor selection.     

科技写作手段电脑化的研究：计算机排版与科技期刊编辑

论述了计算机排版与科技期刊编辑的关系，以及编辑人员在计算机排版时应具备的能力，总结了计算机排版工作中积累的一些值得借鉴的经验。     

圆柱形螺旋弹簧的简捷计算

将圆柱形螺旋弹簧设计中的部分常用公式组合成一组仅与弹簧指数Ｃ有关的公式，并将Ｃ＝４～１４代入计算而获得一套参数表，由此，可提高圆柱形螺旋弹簧的设计效率。     

衡山客运索道工程鞍座的设计

对衡山索道工程中双承载,双牵引鞍座在上、下站房及线路上的配置和主要技术参数、结构进行了较详细的叙述与分析。     

八里庄钢筋混凝土桥控爆拆除

文中介绍在周期建筑，电力、电信等设计密集的环境中，爆破一座结构坚固的大型钢筋混凝土桥梁和桥台浆砌块石的爆破参数设计，局部部位技术处理措施以及孔内孔外延时相结合的非电起爆网路。