Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

熔窑玻璃液流数值模拟的新发展

熔窑玻璃液流数值模拟的新发展赵国昌（清华大学核能技术设计研究院，１０００８４）ＮｅｗＤｅｖｅｌｏｐｍｅｎｔｏｆｔｈｅＮｕｍｅｒｉｃａｌＳｉｍｕｌａｔｉｏｎｆｏｒＦｌｏｗａｎｄＨｅａｔＴｒａｎｓｆｅｒｏｆＧｌａｓｓＭｅｌｔｉｎＴａｎｋＦｕｒｎａｃｅ￥Ｚ...     

关于彩色火焰蜡烛的研制

本文阐述了利用焰色反应的原理研制彩色火焰蜡烛，着重分析并解决了在研制工作中出现的几个技术关键，如主燃剂的选取、蜡烛成型和强度、发色剂的选择与用量等．     

通用串行总线(USB)数据传输模型

USB作为一种数据传输接口，了解它的通信传输机制是正确利用USB利用数据传输的基础，分层次结构对USB数据传输模型加以分析，可以使读者建立起USB体系结构、通信模型和总线事务的框架和概念，并最终对USB传输工作流程有一个清晰的认识。     

光刻胶灰化工艺与深亚微米线条的制作

随着器件尺寸的缩小，细线条的制作成为很关键的工艺，普通光学光刻已接近其分辨率的极限，而电子束光刻和Ｘ射线光刻技术复杂、费用昂贵。本文对光刻胶灰化工艺进行了分析和研究，并应用此工艺进行了深亚微米线条的制作，在普通光学光刻机上制作出宽度小于０．２５μｍ细线条。我们已将此工艺成功地应用在深亚微米ＭＯＳＦＥＴ的制作中。     

热流法计算高温炉内辐射传热

高温炉内的辐射传热是工业生产中常遇到的问题。过去，人们在应用热流法计算辐射传热时遇到了一定的困难，使计算结果与实际有一定的偏差。本文运用文献［１］中给出的新热流数学模型，开发出由新热流方程与能量方程相耦合的计算机程序，其中的比热流参数由线加热热源情况下计算得到。用该程序计算了实验室用马弗炉内的温度场，并且用热电偶实测了炉内的一些温度值，理论计算与实测值符合很好。     

激光扫描共焦荧光显微镜的电子控制系统研究

介绍了激光扫描共焦荧光显微镜的电子控制系统，为了提高激光扫描器的定位精度，在系统中提出采用基于闭环象素时钟发生器的检流计振镜所固有的扫描非线性失真补偿方案，减少输出图象的枕形畸变，实现行扫描空间位置的均匀性。在以细分梯形波电流驱动反应式步进电机情况下，根据实测θｉ曲线，用反插法求得与步进电机运行非均匀性相补偿的相电流波，从而获得在小电流情况下高角度均匀的步进电机细分运行特性。     

Effective lightning protection schemes for distribution line

The causes of lightning outage are subdivided into direct lightning strokes and induced lightning strokes, which are identified by the characteristics of the lightning overvoltage. In the past, lightning protection devices were directed mainly toward the latter, and attention has been focused on the installation of lightning protection devices, ground wires, and reinforcement of insulators. However, lightning outages continue to occur. Thus it is extremely important to clarify the fault characteristics of lightning surges and to study the effectiveness of various lightning protection devices by considering both direct lightning stroke and induced lightning stroke in order to prevent lightning outage in the future. In this research, the electromagnetic transients program (EMTP) has been applied to the direct lightning stroke, and the induced lightning outage analysis program for multiple conductor systems has been applied to the induced lightning stroke to study the effectiveness of lightning protection devices provided by combination of various lightning protection devices. The most effective lightning protection schemes are analyzed and evaluated based on verification tests on the full scale models as well as economic considerations.     

CIMS装配和拆卸生产线的可靠性分析

本文对ＣＩＭＳ装配线和拆卸线的可靠性问题进行研究。文中分析了它们的运行状况，求出了两种生产线的稳态可用度，并用一个例子加以说明。     

可压缩体的滑移线场理论

从理论上建立了可压缩体的滑移线场理论，并给出了解析实例。研究表明：在平面应变条件下，可压缩体内的两族滑移线不仅不正交，而且随着平均正应力的不同而变化；可压缩体的平面应变问题可以直接采用现有的致密体的滑移线场来求出。