泡沫铝的动态压缩性能和吸能性研究

通过测量泡沫铝在动态和准静态压缩条件下的应力 -应变曲线 ,研究了泡沫铝的准静态和动态压缩行为以及不同应变条件下的吸能性 ,并对其应变率效应进行了分析。结果表明 ,在高应变速率和准静态压缩下 ,泡沫铝的σ -ε曲线均表现出弹性变形段、平缓段和密实段三阶段特征 ;泡沫铝的压缩性能具有明显的应变速率敏感性 ,随应变速率的提高 ,流动应力上升 ,吸能性升高     

岩石龟裂系数法在火山岩裂缝储集层预测中的应用

 本文针对辽河东部凹陷油燕沟中生界火山岩的具体特征，采用纵波波速的比值——“龟裂系数”裂缝分析法［1,2,3］，研究了火山岩裂隙发育程度。综合龟裂系数裂缝分析及其他方法发现，该区中生界火山岩有效储集层的测井相特征主要表现为低密度、低中子、高声波时差和高伽马值等特征。此法的关键在于根据不同火山岩的岩性，选用合适的岩石骨架参数，在此基础上利用测井约束地震反演计算火山岩的层速度，进而计算出龟裂系数，然后根据已钻至火山岩井孔的测井相特征编制出火山岩预测厚度图。     

Development of sealing compositions with nanostructure iron-based fillers

The possibility of utilizing nanopowders of iron and Fe-Co-Ni produced bu a thermochemical method in the fabrication of sealing composition materials is investigated. It is established that such hermetic sealing composition materials function reliably under extremal conditions and guarantee elevated strength of adhesion to the surface of the metal and high corrosion and temperature stability. __________ Translated from Poroshkaya Metallurgiya, Nos. 3–4(448), pp. 112–117, March–April, 2006.     

Mycological and physical parameters for selecting suitable packaging material for pre- and post-irradiation storage of cereal grains in Ghana

Owing to the rough warehouse handling of storage sacks in tropical areas in Africa, a suitable storage sack should not support de novo growth of fungal spores because this would reduce the tensile strength of the packaging material and act as a springboard for infecting grain contents. This paper reports the effect of activity of saprophytic fungi on the tensile strength of jute and woven polypropylene sacks. New woven polypropylene sacks carried lower levels of fungal spores (1.3×10¹ cfu/72 cm²) than jute sacks (3.0×10³ cfu/72 cm²). The natural mould penetration and growth was examined on sections (4×5 cm) of both jute and woven polypropylene after previous incubation at relative humidities of 55, 60, 65, 70, 75, 80, 90 and 95% for 10 weeks by placing them on Sabouraud's Agar. There was a significant difference (P = 0.05 level of significance) between the higher penetration of mould growth on jute sacks and that obtained on woven polypropylene sacks. Saprophytic fungi (Aspergillus candidus, A. flavus, A. fumigatus, A. niger, A. japonicus, A. parasiticus, A. ustus, Fusarium oxysporium, F. moniliforme, Penicillium verucosum var. cyclopium, Rhizopus oryzae and Trichoderma viride) isolated from jute sacks reduced tensile strength, measured by an Instron Model 1026, by 50–75% after 10 weeks at 90% R.H. Same fungal species on woven polypropylene sacks did not alter the tensile strength. Woven polypropylene sacks did not absorb moisture whilst the moisture content of jute sacks increased by 5.3–6.0% in 10 weeks at 90% R.H. with concomitant increase in mould and yeast counts by 1–2 log cycles. Evidence is presented to show that there was a positive correlation between the final mycoflora on jute sacks and loss in tensile strength. No correlation, however, was found between the total aerobic bacteria on jute sacks and the concomitant reduction in tensile strength. Fungi therefore play a major role in the reduction of tensile strength of jute sacks. Sterilization by gamma irradiation (8.0 kGy) of jute and woven polypropylene sacks did not affect their intrinsic tensile strength. Woven polypropylene sacks therefore have many microbiological and physical advantages over the traditional jute sacks to merit their use for grain storage in tropical areas like Ghana.     

新型SiMnCr系高强度粗钢筋材料的研制

针对高强度钢筋的性能要求和钢筋生产的工艺特点 ,设计了一种新型的低碳SiMnCr系高强度钢。测定了该钢种的CCT曲线及其力学性能。在锻造或轧态下 ,可获得以低碳马氏体为主含少量贝氏体、残留奥氏体的复相组织 ,经低温回火 ,可获得高的强度 (σb>12 30MPa)和良好的塑性 (δ5≥ 8% )。     

中山包水电站钢岔管设计

中山包水电站钢岔管在天生桥二级水电站 6号压力钢管下平段分岔 ,岔管HD值达 15 40m2 ,结构体形复杂 ,采用NK HITEN780A Z35和NK HITEN6 90B高强度钢材制造安装 ,在国内水电工程中实际应用较少。文章着重介绍岔管的布置、结构分析和焊缝的无损检验要求。中山包水电站的正常发电运行 ,为 80kg/mm2 级高强钢在国内水电行业的应用提供了第 3个成功实例     

自动焊技术在涩宁兰输气管道X70钢试验段上的应用

通过涩宁兰输气管道X70钢试验段的施工,进一步探索和完善自动焊接技术在高强钢管道焊接中的应用。文章介绍了该试验段施工的焊接设备、焊材和焊接工艺,可为同类焊接工程提供借鉴。     

同马大堤施工裂缝情况下的堤坡稳定性分析

 在同马大堤一标段防渗墙施工过程中，堤身出现规模不等的裂缝。介绍了堤身存在裂缝情况下，汛期水位骤降时堤防迎水坡抗滑稳定性的计算过程。重点探讨了堤坡稳定分析中工况选择、计算参数选取和强度参数敏感性分析的思路和依据。研究结果为裂缝的工程处理提供了依据。     

发电机用DJL350磁极钢板的开发与应用

本文论述了高强度冷轧磁极板的试制性研究，应用性研究及在开生桥机组上的实施。通过与国外材料的对比，研究了材料的化学成分、力学性能、磁性能、金相组织及其与性能的关系。并对其实际应用效果进行了分析总结。     

表面电沉积合金层提高碳钢齿轮的接触疲劳强度研究

 接触疲劳破坏是齿轮的主要失效形式之一． 在45#钢齿轮齿面电沉积Ni-P-Co合金层，可以显著提高其接触疲劳强度．同时，对合金层的表面形貌，表面粗糙度、显微硬度和疲劳点蚀坑形貌特征等进行了分析．