液相对流对固液界面稳定性的影响

以模型合金丁二腈－乙醇的强制性晶体生长为基础，利用自行研制的液相对流驱动装置，详细考查了液相自然对流及强迫对流作用下，模型合金平界面失稳的动态生长过程，证实了液相的流动加快了液相温度与浓度分布的均匀化，从而增强了液／固界面的稳定性。并且随流动速度的增加，界面稳定性提高。     

不连续增强镁基复合材料的界面行为

综述了近年来国内外关于Ａｌ２Ｏ３短纤维、ＳｉＣ晶须、ＳｉＣ颗粒、Ｂ４Ｃ颗粒增强镁基复合材料的界面结构及其对复合材料性能影响的研究进展，并对今后的研究提出了一些看法。     

SW233 PIN驱动器自动测试系统的研制

介绍了一种集成电路自动测试系统，该系统采用计算机并口作通信接口，用VB6编程，实现了对外围测试电路的控制，用IEEE-488接口卡控制测试仪器，可对SW233电路的36个参数进行自动测试，并将测试结果自动保存在数据库中。该测试系统具有自动化程度高、操作方便、测试结果精确等特点。     

办公自动化系统与档案管理系统接口问题研究

通过对国内现有办公自动化系统、档案管理系统以及相互之间接口问题解决方案的讨论,比较各种方案的优劣,根据上海石化的实际情况,提出一个符合上海石化实际情况的接口开发实施方案。     

Signals,timers, and continuations for multithreaded user‐level protocols

Precise timing and asynchronous I/O are appealing features for many applications. Unix kernels provide such features on a per‐process basis, using signals to communicate asynchronous events to applications. Per‐process signals and timers are grossly inadequate for complex multithreaded applications that require per‐thread signals and timers that operate at finer granularity. To respond to this need, we present a scheme that integrates asynchronous (Unix) signals with user‐level threads, using the ARIADNE system as a platform. This is done with a view towards support for portable, multithreaded, and multiprotocol distributed applications, namely the CLAM (connectionless, lightweight, and multiway) communications library. In the same context, we propose the use of continuations as an efficient mechanism for reducing thread context‐switching and busy‐wait overheads in multithreaded protocols. Our proposal for integrating timers and signal‐handling mechanisms not only solves problems related to race conditions, but also offers an efficient and flexible interface for timing and signalling threads. Copyright © 2006 John Wiley & Sons, Ltd.     

Pulsed laser deposition of indium antimonide

Single crystalline oriented films of indium antimonide have been grown on cadmium telluride substrates by the pulsed laser deposition technique. The films were (111) oriented which is the substrate orientation. The composition of the grown films were found to deviate from that of the target owing to loss of antimony during evaporation. This deviation from stoichiometry led to film-substrate reaction, resulting in mixed interface. The antimony deficiency in the films were controlled by correcting the stoichiometry, which led to avoiding mixed interfaces. The stoichiometric films showed good surface morphology and well defined sharp interfaces. The IR transmission spectrum showed sharp band to band absorption and effective detection in the MWIR. Paper presented at the poster session of MRSI AGM VI, Kharagpur, 1995     

矩形橡胶复合材料层合板几何非线性分析

文中应用简单高阶剪切层合理论和大变形理论对各向异性纤维增强的矩形橡胶复合材料层合板进行了几何非线性分析.与线性理论相比,本文作者进行的层合板大变形状态的几何非线性分析和所计算的层板应力分布,更具有准确性.     

偶联剂对玻璃纤维/环氧基复合材料界面介电性能的影响研究

本文研究了五种偶联剂对玻璃纤维浸润性能和玻璃纤维/环氧基复合材料界面介电性能的影响。结果表明,玻璃纤维经偶联剂处理后,其浸润活化能降低,与环氧树脂基体间的相容性及化学反应活性得到改善;因此赋予了玻璃纤维与环氧基体间以良好的界面粘结性能,从而提高了玻璃纤维/环氧基复合材料界面的介电性能。其提高的幅度大小与偶联剂的极性及化学结构有关。     

VC .net中利用拆分窗口功能界面切换的实现

介绍了在VC .net的运行环境下运用拆分窗口功能实现界面切换的步骤及具体实现方法,并给出了关键的实现函数与事例.