A novel way to treat refractory waste: Sonication followed by wet oxidation (SONIWO)

The effectiveness of the hybrid system sonication followed by wet oxidation (SONIWO) to treat otherwise refractory waste has been demonstrated. In such a hybrid system homogeneous CuSO₄ catalyst was found to be very efficient.     

Continuous precipitation of calcium sulfate dihydrate from waste sulfuric acid and lime

Precipitation of calcium sulfate dihydrate, gypsum, from (i) a pure sulfuric acid/lime suspension and (ii) a waste sulfuric acid/lime suspension in a continuous pilot plant in the temperature range from 40 °C to 80 °C was studied. It was observed that in the case of waste sulfuric acid with a high content of Mg²⁺ and Fe²⁺ ions, several hours after the beginning of the precipitation, partial dissolution of the product and modification of the crystals from needle‐ and plate‐like to agglomerated structures occurred. It is suggested that the secondary changes occur due to the increased concentration of Mg²⁺ and Fe²⁺ ions in the reactor. Below 60 °C, and above 70 °C plate‐like and needle‐like single crystals respectively were formed. The mean size (d₅₀) of the crystals was found to increase with increasing temperature and decrease with the initial concentration of lime. Gypsum produced between 70 °C and 80 °C is suitable for further processing for construction plaster. In a precipitation process with pure sulfuric acid only single perfect needle‐like crystals occurred. Copyright © 2005 Society of Chemical Industry     

JETS,PLUMES AND BUOYANT JETS IN STATIC ENVIRONMENT

Turbulence represents an essential aspect in atmospheric and oceanic circulations.In particu-lar,it is a preponderant factor in the dispersion of pollutants of artificial or natural origin.Thevertical turbulent jets,plumes and buoyant jets discharging into static environment is one of themost important and basic flow patterns related with the environment pollution.These flows havenumerous important applications,for example,thrust augmentors,waste disposal plumes fromstacks and combustion systems,and significant problems of turbulent diffusion.     

企业实施精益生产的探讨

通过描述造成企业经济效益差的原因之一——浪费，提出了如何实施精益生产，消除企业浪费，以提高企业经济效益．     

Municipal solid waste conversion to energy

In recent years it has been recognised by an increasing number of nations that there is considerable energy potential within MSW. As a result many countries have established R,D& D programmes to examine methods of exploiting this potential. The IEA's MSW Conversion Activity was set up in 1986 to provide an infrastructure for sharing information and co-ordinating work in this area internationally. This Activity was extended in 1989 and currently a total of 9 nations participate in it.

To cope with the wide scope of the area (encompassing both biological and thermal processing of MSW) the Activity was divided into three subgroups or Expert Working Groups (EWGs). Each of these dealt with a distinct area of expertise:

1. •Downstream effects of source separation and screening of MSW

2. •Sampling and analytical protocols

3. •Landfill gas

In addition to these groups a central secretariat based at Harwell (UK) has provided guidance, established and administered databases of contacts and produced a series of national reports.

This paper describes the achievements of the Activity and discusses work proposed for the future.     

Temperature and pressure effects on supercritical CO2 extraction of tomato seed oil

Tomato seed oil was extracted with supercritical carbon dioxide in a semibatch-flow extractor within the temperature range 313–343 K and the pressure range 10.8–24.5MPa. The extraction rates increased with pressure, but decreased with temperature increase because of the variation in solvent density and resultant differences in oil solubility. The fatty acid composition of the extracted oil was similar to that of soybean oil.     

高放废液中^147Pm的测定

建立了高放废液中~(147)Pm的测定方法。用HDEHP萃取稀土,再用HDEHP萃淋树脂柱分离AM和稀土。然后用高效液相色谱法将~(147)Pm从Eu、Ce等其它稀土中分离出来,用液体闪烁法测量~(147)Pm的放射性活度。     

Lactic acid production from dining‐hall food waste by Lactobacillus plantarum using response surface methodology

BACKGROUND: Food waste generally has a high starch content and is rich in nutritional compounds, including lipids and proteins. It therefore represents a potential renewable resource. In this study, dining‐hall food waste was used as a substrate for lactic acid production, and response surface methodology was employed to optimise the fermentation conditions. RESULTS: Lactic acid biosynthesis was significantly affected by the interaction of protease and temperature. Protease, temperature and CaCO₃ had significant linear effects on lactic acid production, while α‐amylase and yeast extract had insignificant effects. The optimal conditions were found to be an α‐amylase activity of 13.86 U g^?1 dried food waste, a protease activity of 2.12 U g^?1 dried food waste, a temperature of 29.31 °C and a CaCO₃ concentration of 62.67 g L^?1, which resulted in a maximum lactic acid concentration of 98.51 g L^?1 (88.75% yield). An increase in inoculum size would be appropriate for accelerating the depletion of initial soluble carbohydrate to enhance the efficiency of α‐amylase in dining‐hall food waste fermentation. CONCLUSION: A suitable regression model for lactic acid production was developed based on the experimental results. Dining‐hall food waste was found to be a good substrate for lactic acid fermentation with high product yield and without nutrient supplementation. Copyright © 2008 Society of Chemical Industry     

Use of zeolite-rich rocks and waste materials for the production of structural lightweight concretes

This paper aims at testing the use of mixtures constituted by natural zeolitized products and SiC-bearing industrial wastes (sludge deriving from polishing of porcelain stoneware tiles, hereafter DPM) for the production of lightweight expanded aggregates as constituents of structural and/or thermo-insulating lightweight concretes. Two commercial products have been used as zeolite natural source: Cab70 (Yellow facies of Campanian Ignimbrite) and IZclino (Turkish clinoptilolite-rich epiclastite). Different amounts of a calcareous material (Pozzano limestones — hereafter CP) from the Sorrento peninsula (Naples — Italy) were also added to a Cab70–DPM mixture. All raw materials were characterized by means of mineralogical (XRPD) and chemical (XRF) analyses. All the products and mixtures were tested from a technological point of view by means of fusibility and firing tests in order to evaluate the expanding properties. It was evidenced that the expansion of the mixture was deeply depending on the occurrence of SiC in the industrial waste. The addition of CP (10 wt.%) to the mixtures accounts for an even increased expansion, though this is accompanied by a worsening of the mechanical features of the material.These results along with literature data allowed to select 3 mixtures (70% Cab70–30% DPM, 70% IZclino–30% DPM, 60% Cab70–30% DPM–10% CP) and each of them was used for the preparation of 5 l of lightweight aggregates afterward employed for the manufacture of lightweight concretes. It was remarked that natural zeolitized materials mixed with DPM (30 wt.%) can provide lightweight aggregates with densities ranging between 0.8 and 1.0 g/cm³ suitable for the preparation of structural lightweight concretes. The addition to the mixture of CP (10 wt.%) produces less dense aggregates (0.6–0.7 g/cm³) potentially useful for the manufacture of thermo insulating lightweight concretes.     

Leaching kinetics of Cs and Co radionuclides fixed in cement and cement-based materials

Leach characteristics of ¹³⁷Cs and ⁶⁰Co radionuclides from both ordinary Portland cement and cement mixed with two different ratios of silica fume and ilmenite have been studied using International Atomic Energy's (IAEA) standard leach method. A mathematical model has been simulated to predict the release rate of each nuclide from cubic geometry waste matrix and the predicted values are discussed in relation to experimentally observed leach rates to confirm the validity of the proposed mechanism in the model. The effect of temperature on the radionuclides leaching rates was also studied and the effective diffusion coefficients were obtained at different temperatures. The net fractional release of the two radionuclides from different waste forms showed a decreasing pattern as ¹³⁷Cs>⁶⁰Co, indicating the largest diffusion coefficient for cesium in all waste matrices.